Iget HomeGuard HGNVK936CAM Bedienungsanleitung

4K Ultra HD PoE Bullet CCTV Camera

Instruction Manual - HGNVK-936CAM / EN

www.iget.eu/cs/helpdesk-centrum-cs

https://helpdesk.intelek.cz/

Add-on Camera

for iGET Homeguard

PoE x4900x Series

Be Protected &

High-accuracy Motion Alert

Welcome

Thank you for choosing iGET HOMEGUARD

IP66

3 4

SpeciﬁcationsWhat’s in the box

Warning Sticker

PoE Bullet Camera

Warranty Card Fixings

Ethernet Cable User Manual









































 









 







 

 







Introduction

Each Homeguard PoE Bullet camera is supplied with a mounting kit for attaching it to a wall or ceiling. Before you afﬁx the camera in

position, please ensure the cable is of adequate length to reach the NVR. We also recommend you try the camera with the NVR before

mounting it, to ensure it is in good working order, and help diagnose any problems created when installing it.

•NVR’s PoE ports make setup quick & easy, with one cable installation per camera that provides both power and HD video.

•Latest infrared cut ﬁlter & powerful LEDs producing night vision up to 100ft / 30m, weatherproof IP66.

•State-of-the-art PIR motion sensor designed for security applications & optimized to reliably detect people but also cars, large pets

and other large heat-generating objects.

•With more accurate motion detection you have more reliable notiﬁcations & activity-triggered recording, eliminating false triggers

due to the wind, leaves falling, bugs, rain & more, saving you hard drive space & playback time (when combined with a NVR).

Be Protected & High-accuracy Motion Alert:

5 6

Connecting the Camera

To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the

other end of the cable into one of the camera inputs on the back of your NVR.

Note: The power connector is provided as an alternative power option if required. Your NVR will provide power over the Ethernet cable when connected and a separate

power adapter is not required.

HDMI WAN LAN8 LAN6 LAN4 LAN2

LAN7 LAN5 LAN3 LAN3

VGA

48V

CAUTION

RISKOF ELECTRIC SHOCK

DONOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK

DONOT OPEN COVERS. NO USER SERVICEABLE

PARTSINSIDE. REFER SERVICING TO QUALIFIED

SERVICEPERSONNEL.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT

EXPOSEUNITS NOT SPECIFICALLY DESIGNED

FOROUTDOOR USE TO RAIN OR MOISTURE.

AUDIO OUT

60ft/18.3m Ethernet Cable

PoE NVR

7 8

The camera can be mounted onto a ﬂat surface using screws. The surface must have sufﬁcient strength to hold the camera.

•Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws. Then, using

appropriate screws for the surface you're ﬁxing the camera to, secure the camera in place.

•If you're mounting to a wooden surface, then screw the camera directly to the surface.

•If you're mounting to a masonry surface (bricks, concrete or similar), then you'll need to use wall plugs.

Aiming the camera

Mounting the Camera

1. Loosen the screw (use an Allen key) to adjust the camera's orientation. This enables you to

rotate the camera so no matter what direction it is facing, your images will be the right way

up. Tighten the screw to secure in place.

2. Loosen the screw to tilt the camera up and down. Tighten the screw to secure in place.

3. To pan the camera left and right, loosen the screw and position accordingly. Tighten the

screw to secure in place.

1. What you want to monitor and where you’ll get the best view of it.

2. How you're going to connect the cameras to your monitoring system; remember that cables and connections should be kept out of

the weather.

3. How to keep the cameras out of harm's way. It's recommended to mount your cameras at an elevated position.

4. Place your cameras as close to the area of interest as practicable. The best position is from about 13ft/4m above looking slightly

down, keeping in mind the details you are looking for.

5. Think about the most likely way a potential offender may approach your home, use your cameras to give you the best coverage of

these areas.

6. Run cables inside a wall cavity or other protected enclosure, and ensure that all wiring and connectors are insulated and protected

from moisture.

7. Don’t put your cable near live electrical wiring. AC electricity generates radio “noise” which can interfere with the signal from your

cameras.

Camera Location Tips

Troubleshooting

No picture / signal

•4Kcameras are compatible with 4KHD NVR recorders.

•Ensure the camera is connected to a compatible NVR by ethernet cable.

•The camera may take up to 1 minute to power up after being connected to the NVR.

•There may be an issue with your extension cable run. Connect the camera to the NVR using a different Ethernet cable.

Picture is too bright

•Ensure your camera isn’t pointed directly at a source of light (e.g. sun or spot light).

•Move your camera to a different location.

•Check the brightness and contrast settings oof the NVR or monitor.

Picture is too dark

•Check the brightness and contrast settings of the NVR or monitor.

Night vision is not working

•The night vision activates when light levels drop. The area may have too much light.

Picture is not clear

•Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean cloth.

•Make sure that the cable run is within the limitations speciﬁed in the section ‘Cable Extension Options’.

Bright spot in video when viewing camera at night

•Night vision reﬂects when pointing a camera at a window. Move the camera to a different location.

910

Warranty & Support

All the products sold are covered by 24 months warranty from the date of invoice.

Warranty instructions:

1. Please contact us when the product is caused by its own fault within 2 year warranty.

2. Please mail us your written warranty card as soon as possible after purchasing our products so that we can repair or replace this product to its

original operation condition. Or the company will not deal with it.

3. Please write the truth on the warranty card.

4. Paid for repairing as follows:

A. Equipment failure caused by human operation

B. Equipment failure caused by not conforming to the using environment

C. No warranty card

D. Warranty expired

Note: Please keep the warranty card for the better service.

For technical support, please contact us [email protected] or https://helpdesk.intelek.cz

Product model:

Product serial number:

Purchase date:

User name:

Contact person:

Telephone:

Inhaltsverzeichnis

Andere Iget Sicherheitskamera Handbücher

Iget

Iget HomeGuard HGDVK-84404 Bedienungsanleitung

Iget

Iget HGNVK-48302 Bedienungsanleitung

Iget

Iget SECURITY EP18 Bedienungsanleitung

Iget

Iget HOMEGUARD HGNVK84904 Bedienungsanleitung

Iget

Iget SECURITY EP29 Bedienungsanleitung

Iget

Iget Home Guard HGWDA522 Bedienungsanleitung

Iget

Iget Home Guard HGWIP-710 Bedienungsanleitung

Iget

Iget Super HD SmartCam Plus Bedienungsanleitung

Iget

Iget HOMEGUARD HGWIP-816 Bedienungsanleitung

Iget

Iget HomeGuard HGDOA5666 Bedienungsanleitung

Iget

Iget HOMEGUARD HGWIP811 Bedienungsanleitung

Iget

Iget HOME GUARD HGWIP818 Bedienungsanleitung

Iget

Iget Home Guard HGWDA510 Bedienungsanleitung

Iget

Iget HGNVK-938CAM Bedienungsanleitung

Iget

Iget HomeGuard HGWOB-853 Bedienungsanleitung

Iget

Iget HOMEGUARD HGWOB851 Bedienungsanleitung

Iget

Iget Homeguard HGWIP812 Bedienungsanleitung

Iget

Iget HGWIP815 Bedienungsanleitung

Iget

Iget SmartCam Flex Bedienungsanleitung

Iget

Iget HOMEGUARD HGNVK-930CAM Bedienungsanleitung

Iget

Iget HOMEGUARD Super HD SmartCam Pro Bedienungsanleitung

Iget

Iget EP15 Bedienungsanleitung

Iget

Iget CS1 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung