Igloohome Push-Pull Mortise Montage- und Wartungsanleitung
1
Installers &
User guide
Push-Pull
Mortise.
Version 0.1 04/21 MP1F
As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloohome.co/support for the latest version of the manual.
Welcome!
This guide will get you up and running with your igloohome Push-Pull
Mortise. In the meantime, you should follow igloohome on Facebook
and Youtube!
Visit ourYoutubeLike us on Facebook
Table of Contents
What’s Included 4
Specifications 5
Installation Guide
Requirements 6
Preparing the Door 8
Installation Instructions 10
User Guide
Lock Anatomy 13
Features 14
Unlocking from the Outside 16
Unlocking from the Inside 18
Locking from the Outside 20
Locking from the Inside 21
Child & Pet Safety Handle Function 22
App Onboarding 24
Managing Access in App 25
9V Jumpstart 27
Changing Batteries 28
Lock Behaviour 29
Airbnb Connect 31
Audio and LED Indications 32
Troubleshoot 33
4
What’s Included
Front Assembly Back Assembly Back Plate
Mortise Assembly
Mortise Shafts
Strike Plates AA Batteries x4 RFID Tags x2
Screws
Drill Sheet &
Installation Guide
RFID Stickers x2
5 Physical Keys
Note: 1. For door frames with thickness of 40mm and above, it is
recommended to use the strike plate with an extended curved lip;
2. For doors with thickness of 40mm - 50mm, please use the shorter shaft;
for doors with thickness of 50mm - 70mm, please user the longer shaft.
X 4
X 4
X 4
X 6
X 4
5
Specifications
Model igloohome Push-Pull Mortise
Battery Type 4 x AA* Alkaline
Battery Life Up to 10 months
Emergency Power 9V Alkaline Battery
Operation Temp -25°C to 55°C
IP Rating IP54
Material Zinc Alloy, ABS, Acrylic
Weight Net: 3.9kg, Gross: 4.7kg
Unlock Methods Fingerprint, Bluetooth, PIN Code, RFID Tags, RFID Stickers,
Multi-Function Button, Handle, Physical Keys
Front Back
82mm (2.23”)
360mm (14.17”)
Side
71mm
(2.80”)
* DO NOT USE: Heavy Duty, Eveready, GP, or rechargeable batteries. Duracell, Energizer and Panasonic
alkaline batteries recommended. Please note that using better batteries will improve the performance and
lifespan of the lock.
360mm (14.17”)
71.2mm
(2.80”)
82mm (2.23”)
6
ClearanceDoor Thickness
>190mm (7.48”)
(with handle)
40mm-70mm
(1.57” - 2.75”)
> 360 mm (13.97”)
73mm
(2.87”)
10 mm
(0.39”)
Mortise Assembly Length
Dead bolt
Sensor Latch
Latch bolt
120mm (including 10mm for the wire)
Cable
10 mm
(0.39”)
(4.72”) (0.39”)
Installation Guide
Requirements
7
Screw Specifications
Door Type
• 20mm
(0.78”) X 4
X 4
• 20mm
(0.78”)
• 45mm
(1.77”)
For doors with thickness 40 - 50mm
(1.57” - 1.98”)
For doors with thickness 50 - 70mm
(1.98” - 2.75”)
Right Hand Installation
Note: Hinge is on your left.
Note: Hinge is on your right.
Left Hand Installation
Hinge
Outside
Outside
Hinge
X 4
X 6
• 20mm
(0.78”)
• 20mm
(0.78”) X 4
8
Note: Not for metal gates, glass doors or sliding doors.
If you are unsure if your door is suitable, send us web links to
Preparing the Door
Items needed:
Recommended
Door and door frame material : Wood
Recommended
Gap between door and door frame: <3mm (0.01”)
Drill 32mm (1.25”)
Hole Saw
68mm (2.70”)
Hole Saw
20mm (0.78”)
Spade Bit
#2 Phillips Screw Driver 20mm (0.78”)
Chisel
Hammer
135mm
Drill Sheet
9
How to use the Drill Sheet
Mark the center of the holes and then drill for accuracy.
Drilling (Door)
Make sure this is
aligned to the centre
of door edge
Door edge
Fold here
before drilling
holes for side
Door edge
120mm (4.72”)
Chiselling
Depth Width:
2 - 3mm
(0.0079” - 0.01”)
10
Installation Instructions
Determine if your door swings inwards or outwards and adjust the PUSH-PULL setting
on the front and back assemblies accordingly.
Door Thickness (mm) Notch to Snap*
40 - 45 10mm (from the end)
45 - 50 5mm (from the end)
50 - 55 NA
55 - 70 NA
From the outside, if the door swings
OUTWARDS towards you
• Front Assembly – set to PULL
• Back Assembly – set to PUSH
From the outside, if the door swings
INWARDS away from you
• Front Assembly – set to PUSH
• Back Assembly – set to PULL
Front Assembly
Front Assembly
Back Assembly
Back Assembly
Cut the key cylinder accordingly for dierent door thickness.
5mm
10mm
* The notch to snap serves as guideline only and might
change depending on actual door conditions.
Rear of Back AssemblyRear of Front Assembly
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Igloohome Türschloss Handbücher
Igloohome
Igloohome RW1 Montage- und Wartungsanleitung
Igloohome
Igloohome RM2F Bedienungsanleitung
Igloohome
Igloohome RG1 Montage- und Wartungsanleitung
Igloohome
Igloohome Deadbolt 2S Montage- und Wartungsanleitung
Igloohome
Igloohome Smart Mortise 2 Montage- und Wartungsanleitung
Igloohome
Igloohome Smart Deadbolt 2S IGB4 Bedienungsanleitung
Igloohome
Igloohome Smart IoT Deadbolt Montage- und Wartungsanleitung
Igloohome
Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung
Igloohome
Igloohome Deadbolt 2S Montage- und Wartungsanleitung
Igloohome
Igloohome OE1 Montage- und Wartungsanleitung
