1514
iGolf GPS Caddie IIUser ManualUser ManualiGolf GPS Caddie II
Map Golf Course Delete Course - Satellites - Battery Level - Sync Handheld
Map Golf Course (continued)
*If mapping a Custom Point, the user may customize the name prior to registering GPS data. The user
may select from a list of common abbreviations, or choose a six character name, to easily identify the
point on the course. If the user chooses not to customize the name, proceed directly to “Register Point”.
Delete Course
This feature allows the user to permanently remove a golf course le from the
device. Highlight “Delete Course” on the Main Menu and press Enter. Scroll to
highlight the golf course to delete and press Enter. To remove course from device,
conrm by highlighting “Yes” and pressing Enter.
Satellites
This feature displays the GPS satellites recognized by the device. Satellites
providing location data to the device for use in distance calculation are represented
by black circles or bars. Satellites in view but not used are displayed as clear circles
or bars. Typically, at least three satellites providing location data are required
before GPS distance can be calculated. Highlight “Satellites” on the Main Menu and
press Enter.
Battery Level
This feature displays the status of the batteries installed in the device. Battery
information is displayed using a horizontal bar representing the amount of power
remaining in the batteries. If using rechargeable batteries, it is essential to change
the battery type in Settings to receive the proper reading. Highlight “Battery Level”
on the Main Menu and press Enter.
Sync Handheld
This feature initiates communication between the device and computer, allowing
golf course les to be transferred using the iGolf Sync software. When the device is
ready to send or receive les, the connection status will display “Waiting”. Once the
transfer of les has begun, the connection status will change to “Active”. Highlight
“Sync Handheld” on the Main Menu and press Enter.
3. Course Data
Highlight “Course Data” and press Enter. Highlight desired tee box and
press Enter. Select the desired hole and press Enter. Input par and distance
information using the toggle button to select values and move between options.
When nished, scroll to “Save” and press Enter. Repeat these instructions for
all desired holes and tee boxes for the course and press ESC to exit.
4. Map GPS Point
Highlight “Map GPS Point” and press Enter. Select the
desired hole and press Enter. Highlight point to map*
and press Enter. Stand at desired location, conrm
satellite strength and press Enter to register point.
Do not move until process is complete. Repeat these
instructions for all desired points. You MUST scroll to
“Save” and press Enter to avoid losing mapped data.
