Ihse KVM-TEC MAXflex KT-6014L Bedienerhandbuch

Misprints, errors and technical changes reserved

kvm-tec

First Aid

M A X  e x

Video error

(stripes in the

picture)

USB is not

working

No Power

(No LED)

Check the

powerplug

Is the power

supply ok? Try

another Unit.

Contact kvm-tec

support

Are the USB

Devices plugged

in correctly?

Is the USB cable

on the Local side

plugged into the

PC?

Are the USB

Devices working

directly on the

PC?

Check if local

and remote Unit

have the same

 r m w a r e

Replace the USB

cable from PC to

the Local

Extender

Check if the local

or the remote

Unit is causing

the problem by

swaping rst the

local and than the

remote Unit to

another Unit

Contact kvm-tec

support

Check if all

cables are plug-

ged in correctly

Check if the PC is

sending a Image by

plugging in a

monitor on the

local out of the

local Unit

Check if the DDC is

set correctly (in menu

under point„O“)

Check if both

Units have the

correct rmware

No Video

Contact kvm-tec

support

Check if all

cables are plug-

ged in correctly

Check if the PC is

sending a Image

by plugging in a

monitor on the

local out of the

local Unit

Check if local and re-

mote Unit have the

correct rmware

Check if the DDC

is set correctly (in

the menu under

point„o“)

Check if the

network switch

is setup correctly

and has enough

bandwidth

Contact kvm-tec

support

Check if other units

have the same

behaviour

We are here for you to answer

your questions about installation?

Manual download www.kvm-tec.com

kvm-tec Installationchannel on our homepage

personally +43 2253 81912

kvm-tec Support

suppor[email protected]

Phone: +43 2253 81912 - 30

Check out

our Installation Channel:

www.kvm-tec.com

flex

max

kvm-tec

Quick

Instruction

MAXex

Single Copper redundant

KT - 6014L CPU/LOCAL

KT - 6014R CON/REMOTE

Misprints, errors and technical changes reserved

Power plug

12V 1A

Power plug

12V 1A

USB to PC

DVI in

from PC

DVI to Monitor

USB from

Keyboard and mouse

Network cable CAT5e/6/7/ up to 150m/492ft (redundant)

DVI out

to Monitor

Network cable CAT5e6/7/ up to 150m/492ft - main link

Audio from PC

Audio to PC

Audio to speaker

Audio from

microphone

RS232 plug

Power plug

12V 1A (redundant)

Power plug

12V 1A (redundant)

Delivery Content

LOCAL/CPU Unit

1 x MA local (CPU)

1 x wall power supplyl 12V 1A (INT or EU-plug)

1 x DVI - DVI cable 1,8m/5.9ft

1 x USB cable 1,8m/5.9ft

4 x rubber feet

REMOTE/CON Unit

1 x MA remote (CON)

1 x wall power supplyl 12V 1A (INT orEU-plug)

4 x rubber feet

Misprints, errors and technical changes reserved

Quick Installation Maxex Single local / CPU – remote / CON

1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.

2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit.

Connect keyboard and mouse to the CON / Remote Unit.

3. Connect the CPU / Local and the CON / Remote Unit with a network cable.

4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in).

5. Almost done! Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the

microphone

6. Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video

sharing the network has to support IGMP snooping.

HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

Open OSD menuOpen OSD menu

The OSD main menu is opened with the standard shortcut: 5 xThe OSD main menu is opened with the standard shortcut: 5 x

ALT GrALT Gr

(Attention: the rst 20 seconds 5 x Scroll always works, in case(Attention: the rst 20 seconds 5 x Scroll always works, in case

the shortcut was forgotten.)the shortcut was forgotten.)

Switching listSwitching list : CTRL+ALT+PRINT: CTRL+ALT+PRINT

Changing the shortcutsChanging the shortcuts in the OSD menuin the OSD menu

Go to the Remote Settings and then navigate to Keyboard Short-Go to the Remote Settings and then navigate to Keyboard Short-

cut.cut.

Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved

USING THE ON SCREEN MENU

Use the monitor and keyboard to use the main menu.

To access the main menu:

1. Make sure the extenders, the monitors and the computer are switched on.

2. Press the ALT+GR key on your keyboard quickly ve times.

The main menu appears with an overview of the sub-menus.

3 To open a sub-menu press the applicable key.

Main Menu

Main meu Short Cuts :

S Status Overview Menu Status /current status

U Update Flash FW Firmware Updates

F Features Overview Settings Features

D DDC Option DDC Option Fix settings 1020 x 1080

L Local Settings Settings Local

R Remote Settings Settings Remote

A About Overview Overview Upgrades Upgrades

Q Exit Exit

SYSTEM STATUS

Single

Dual

In the status overview menu the current status of the extender connection is displayed. It

provides information on the connection itself as well as resolution of the video channel, and USB-

status.

The enabled options and the current rmware-version is displayed in the left top corner.

Link status shows whether there is a physical connection available. Connected indicates if kvm

data is currently able to be transmitted.

Video and USB show if data is currently being transmitted.

Misprints, errors and technical changes reserved

VIEWING THE FIRMWARE VERSION

Under„A“ - About the currently installed rmware version of the remote (CON) and local

(CPU) Extender is displayed (e.g.‚4267‘)

FEATURES MENÜ

Features Menu

P Point to Point Mode Enabled/Disabled

(Point to Point Point to Point excludes itself

with Matrix mode

M Matrix Switching Mode Disabled/Enabled

D Freeze last Image (Disabled)Disabled/Enabled

E USB Emulation Mode (Disabled ) Disabled/Enabled

S USB Save Feature (mass storage usable) Disabled/Enabled

O Power Redundance Alert Alert System

C Diagnosis Diagnosis menu

U Unlock Features Unlock Features

L Link redundancy redundant Link for local Units

I IP Management IP Management

POINT TO POINT

You can switch the Point to Point mode on and oﬀ by pressing the„P“ key

ATTENTION - if the point to point mode is activated, the switching mode cannot be activated

MATRIX SWITCHING MODE

By pressing the„M“ button you can switch the Matrix Switching Mode oﬀ and on

KVM-TEC

Gewerbepark

Mitterfeld 1 A

2523 Tattendorf

Austria

www.kvm-tec.com

IHSE USA LLC

1 Corp.Dr.Suite

Cranburry NJ 08512

USA

www.ihseusa.com

IHSE GMBH Asia

158Kallang

Way,#07-13A

349245 Singapore

www.ihse.com

IHSE China Co.,Ltd

Room 814

Building 3, Kezhu Road

Guangzhou PRC

www.ihse.com.cn

IHSE GmbH

Benzstr.1

88094 Oberteuringen

Germany

www.ihse.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ihse Netzwerk-Hardware Handbücher

Ihse

Ihse kvm-tec max flex Bedienerhandbuch

Ihse

Ihse kvm-tec 6930 Original Betriebsanleitung

Ihse

Ihse KT-6021L Original Betriebsanleitung

Ihse

Ihse Kvm-Tec MAXflex KT-6016L-F Bedienerhandbuch

Ihse

Ihse Kvm-Tec INDUSTRYFLEX line KT-6016iL Bedienerhandbuch

Ihse

Ihse kvm-tec media4Kconnect KT-6935 Original Betriebsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung