Ikegami INR-Q500 Bedienungsanleitung

Ikegami Tsushinki Co., Ltd.

INSTRUCTION MANUAL

(SETUP INSTRUCTIONS)

MODEL

OUTDOOR USE WARNING

WARNING — TO PREVENT FIRE OR

ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

INR-Q500

NETWORK RECORDER

Instructions for Disposal of Electric and Electronic Equipment in Private Household

Disposal of used Electric and Electronic Equipment

(Applicable in the European Union and other European countries with separate

collection systems)

This symbol on the product, or in the related documents in the package, indicates that this product

shall not be treated as normal household waste. Instead, it should be taken to a proper applicable

collection point or depot for the recycling of electric and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent possible negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of this

product. The recycling of materials will help to conserve natural resources.

For more detailed information about recycling of this product, please contact your local city authority, your

household waste disposal service or the place where you purchased the product.

Introduction

Thank you very much for your wise choice of this product. Be sure to carefully read this manual

before use in order to fully understand the product’s functions and to keep the product at full

capacity.

Handling precautions

This product is equipped with a hard disk drive. Be very careful to keep the

product from impacts and vibrations. Otherwise it may get in trouble.

1. Installation location and conditions

* Do not plug in the power cable while installing the product.

* Never open the housing. The product has high-voltage sections inside.

* Install the product in a place within its ambient temperature range and without condensation.

* Do not block nor cover the product’s vent.

* Make sure the supply voltage is as specified.

* Handle the product with care. Impacts and vibrations may get the product scratched or the

hard disk drive in trouble.

* Do not install the product in a hot spot: not exposed to direct sunlight nor near a heating

element, for example.

* Do not install the product in a strong magnetic field or exposed to radio waves.

* Do not place this product near a radio, TV set and other signal receiver. Such equipment may

suffer from poor signal reception.

* Use a 3P outlet with grounding prong for added safety.

* Do not move the product with the power on.

* Do not unplug the power cable during recording and replay.

2. Saving onto the hard disk drive

* Be sure to make recording in advance to make sure there is no problem with the recording.

* If this product or any other device gets in trouble and the data is not properly recorded or

replayed, the manufacturer is not responsible for that data. If by any chance the hard disk

drive fails, the data cannot be restored.

* Download important data to the PC for backup.

3. Copyrights and the protection of personal information

* Take proper measures for delivering copyrighted and personal video materials.

4. Consumable parts

* The hard disk drive and cooling fan are regarded as consumable. To replace them, contact

your local dealer or Ikegami’s Customer Service Department. (You will be charged for labor

and parts even during the warranty period.)

* The hard disk drive’s service life is 20,000 operating hours or so.

• This service life is just for your reference, not guaranteed.

Checking the supplies

Quantity

* AC power cable ........................................................................ 1

* Instruction Manual .................................................................... 1

* Lock fixture ............................................................................... 1

* Lock fixture mounting screw ..................................................... 2

Contents

Page

Introduction

Handling precautions

Checking the supplies

Contents

1. Outline ............................................................................................................. E-1

2. Features ........................................................................................................... E-1

3. Names of parts and their functions .................................................................. E-2

3-1. Front panel ................................................................................................ E-2

3-2. Front panel (open view) ............................................................................ E-2

3-3. Rear panel ................................................................................................ E-3

4. Basic connections (Connecting the LAN cable) ............................................... E-4

4-1. Connecting the recorder in the LAN ......................................................... E-4

5. Before connecting the recorder into the network ............................................. E-5

5-1. Setting the PC’s IP address ...................................................................... E-5

5-2. Switching on the recorder ......................................................................... E-8

5-3. Connecting the PC to the recorder ........................................................... E-8

5-4. Setting the recorder’s IP address ............................................................. E-9

6. Connecting the recorder into the network ........................................................ E-10

6-1. Registering the network camera/encoder ................................................. E-10

6-2. Checking images ...................................................................................... E-11

7. Using the lock fixture ....................................................................................... E-14

8. Troubleshooting ............................................................................................... E-15

9. Specifications ................................................................................................... E-16

10. Appearance view ............................................................................................. E-17

11. Warranty and after-sales service ..................................................................... E-17

E-1

1. Outline

This network recorder is compatible with IPD-Q01 network camera and IEN-T01 network en-

coder. JPEG2000 images that are compressed in the network camera/encoder, together with

the audio data, are received via a network by the recorder and recorded on its hard disk drive.

Recorded data can be searched by the web browser of a networked PC and replayed in split-

screen format.

Multiple images from multiple network cameras can also be displayed live. Alarms or troubles

may be notified via e-mail in real time. This function lets you know anything unusual wherever

you are.

2. Features

(1) High-quality, high-speed recording

JPEG2000 images that are compressed in the network camera/encoder can be recorded

with higher resolution and picture quality at 240 fps maximum.

(2) Simultaneous recording from up to 32 network cameras

Images and sound from as many as 32 network cameras can be simultaneously recorded.

(3) Scheduled recording for 320 programs

Up to 10 programs for each camera can be scheduled for recording. With 32 cameras in

place, as many as 320 programs would be presettable. Not just routine recording and alarm

recording but also motion detection recording are preprogrammable.

(4) Streaming to up to 4 PCs

Live images and replays can be streamed to 4 PCs at once.

(5) Web browser-based display

Images and audio can be searched and reproduced through the web browser (Internet Ex-

plorer) of a PC. Images are displayed in 1, 4, 7, 10, 13 or 26 split screens.

(6) Search function

Dates and times, alarms and motion detections are readily searched to find your target im-

ages speedily.

(7) Alarm notification function

Alarms and troubles can be notified via e-mail to 10 addresses at once. The JPEG image just

when an alarm occurs can also be attached to the alarm notice mail.

(8) Maintenance

Via the network, the product software can be updated and self-diagnosed for real-time main-

tenance.

E-2

3. Names of parts and their functions

3-1. Front panel

①POWER LED (green)

Stays on while the power is on.

②HDD LED (green)

Stays on while the hard disk drive is accessed.

③REC LED (red)

Stays on while recording is going on.

④ETHERNET LED (green)

Lights up when data has been received from a camera in question.

⑤ERROR LED (yellow)

Lights up if the hard disk drive gets in trouble.

3-2. Front panel (open view)

①Power button

Make sure the main power switch on the rear panel is at the “I” (ON) position. Press this

button, and the recorder gets started in 1 minute or so. When this button is pressed again, the

recorder does the end processing and turns off in 20 minutes or so.

* Just press on the power button to shut down the recorder in usual way. If the button

is held down longer than 4 seconds, the power is forced off without the end process-

ing. But this is for shutting down the unit in case of emergency. Never hold down the

button under normal conditions.

②Reset button

Press this button to get the recorder restarted. It takes about 90 seconds to reboot the unit.

③DVD-RAM drive

Insert an FAT32-formatted DVD-RAM disk, which is writable faster than 5 times, to back up

the alarm records.

Recommended DVD-RAM disk

Hitachi Maxell DRM47C.1P (1 disk), DRM47C.1P5S (5 disks)

Mitsubishi Kagaku Media DHM47GN1 (1 disk), DHM47GN5 (5 disks)

① ② ③ ④ ⑤

② ①

③

E-3

3-3. Rear panel

①Main power switch

Used to turn on and off the main power: “I” position for ON, “O” position for OFF.

②AC inlet

Used to connect the accompanying AC power cable.

③ETHERNET

Used to connect the LAN cable (Category 5e or higher).

① ② ③ 

E-4

4. Basic connections Connecting the LAN cable

4-1. Connecting the recorder in the LAN

Use a Category 5e or higher LAN cable (straight cable).

IPD-Q01P

INR-Q500

INR:192.168.1.200

LANcable(straightcable)

PC:192.168.1.10

Use a hub with gigabit (1000M) ports.

Connect the INR-Q500 to the gigabit-

compatible port.

HUB

IPD-Q01P

Example(INR-Q500)

 IP IPaddress ：192.168.1.200

 Subnetmask ：255.255.255.0

 Username ：［admin］

 Password ：1

Example(PC)

 IP IPaddress ：192.168.1.10

 Subnetmask ：255.255.255.0



E-5

5. Before connecting the recorder into the network

First it is necessary to set the recorder’s IP address according to the existing network environ-

ment. Because a PC is used to make the recorder’s settings, first modify the PC’s IP address to

the recorder’s one.

5-1. Setting the PC’s IP address

First disconnect the PC from the existing network and modify the PC’s IP address to the

recorder’s one.

(1) To set an IP address, start with the properties of the local area network connection.

Getting the “LAN Connection” properties displayed

Click on the start button first and then on the control panel.

(2) Click on “Network and Internet Connections”.

Andere Handbücher für INR-Q500

Inhaltsverzeichnis

Sprachen:

Andere Ikegami Tuner Handbücher

Ikegami

Ikegami INR-Q500 Bedienungsanleitung

Beliebte Tuner Handbücher anderer Marken

Tunersys

Tunersys WS16 1 Bedienungsanleitung

Arcam

Arcam DT91 Bedienungsanleitung

Magnum

Magnum MD 102T Bedienungsanleitung

HDHomeRun

HDHomeRun 20121008 Bedienungsanleitung

Crestron

Crestron C2N-TXM Bedienungsanleitung

Eico

Eico HFT-92 Bedienungsanleitung

MFJ

MFJ MFJ-928 Bedienungsanleitung

NAD

NAD C 445 Bedienungsanleitung

Sony

Sony ST-SA5ES Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SC-FM1 Bedienungsanleitung

Antique Automobile Radio

Antique Automobile Radio 283501B Bedienungsanleitung

Monacor

Monacor PA-1200R Bedienungsanleitung

Technics

Technics ST-X301L Bedienungsanleitung

Manhattan

Manhattan 176156 Bedienungsanleitung

Marantz

Marantz ST-15S1 Bedienungsanleitung

Korg

Korg HA-40 Bedienungsanleitung

Harman Kardon

Harman Kardon TU915 Bedienungsanleitung

Teac

Teac T-1D Bedienungsanleitung