Ikelite 6170.70 Bedienungsanleitung

Product Registration

Please register your product within 15 days of purchase. Our product

registration database is the quickest way for us to contact you in the

event of a product update.

To register, send a photo of the above registration label to us via

[email protected] along with your name, address, and phone

number.

Underwater Housing for Panasonic Lumix DC-

ZS70, ZS80, TZ90, TZ95

Product # 6170.70

Introduction

Thank you for your purchase of Ikelite products.

Our primary focus is to provide quality, professional grade products

for use in and under water. Our products are designed, manufactured,

and distributed from our sole facility in Indianapolis, USA where we

started in 1962.

We are available if you have any questions or want photo advice.

Send us an email 24 hours a day to [email protected]. We strive to

reply within 1 business day.

An electronic version of this instruction manual is available for

download via the product page on our website:

https://www.ikelite.com

In the Box

• Housing

• Main o-ring # 0109 (installed)

• Port cover # 0200.08 (installed)

• 1/16” hex key # 0945.16

• Silicone lubricant 1cc tube

Important Notices

»This housing ships pre-congured for Panasonic Lumix DC-

ZS80 and DC-TZ95 cameras. Some adjustment is required for

use with Panasonic Lumix DC-ZS70 and DC-TZ95 cameras.

»Do not pull the shutter trigger without a camera installed. You

may accidentally detach or damage the control spring.

»Never leave a housing in a rinse tank, even if it is the only

system in the tank. Accidental damage may occur when the

user walks away from a housing while it is in the rinse tank.

»Do not use alcohol, cleaning agents, spray lubricants, Rain-X,

or other solvents on the housing or lens port. Use of an

incompatible chemical compound can damage the plastic and

o-rings, and may result in leaking.

Contents

Product Registration 1

Introduction 2

In the Box 2

Important Notices 3

Getting to Know Your Housing 6

Tray Mounts 8

Lanyard Mount 8

Accessory Port 8

Trigger Extension 9

Setting Up Your Camera 9

Pre-Installation Checklist 9

Camera Settings 9

Exposure Settings 9

Adjusting Your Housing for ZS70, TZ90 10

Control Requiring Adjustment 10

Adjusting the Control 10

Re-Adjusting the Control for ZS80, TZ95 11

Setting Up Your Housing 11

Opening the Housing 11

Installing the Camera 12

Closing the Housing 13

Setting Up An External Strobe 13

About Fiber Optic Cords 13

Attaching a Fiber Optic Cord 14

Getting in the Water 15

Final Check 15

Entering the Water 15

Shooting Underwater 16

Learning about Underwater Photography 16

Maintaining Your Housing 17

Post-Dive 17

Lens Port 17

Storage 18

Servicing Recommendations 18

Lubricating Controls 19

Lubricating Push Buttons 19

Troubleshooting 20

Spare Parts 22

Limited Warranty 22

Service and Repairs 23

Getting to Know Your Housing

Shutter

Fiber optic

ports

Lid snap

Tray mounts

Lens port

Motion picture

Zoom Mode dial

Control ring

Accessory

port

Fn2

DISP

LVF

Control

dial

O-ring

Fn2

DISP

LVF

Left / Macro

Playback

Down / Drive

mode

Lid hook

Up / Exposure

compensation

Right / Flash

Func / Set

4K photo

LVF

Delete

Fn2

Lanyard

Display

Tray Mounts

This housing features two 1/4-20 threaded tray mounts on the bottom

of the housing. The spacing between the tray mounts is 3” (76.2 mm).

Optional tray with handles and mounting hardware are sold separately.

It is recommended to detach and thoroughly rinse the tray mounts,

tray, and mounting hardware, with fresh water routinely during

continuous use and prior to storage.

Lanyard Mount

The included lanyard is a break-away safety lanyard which is designed

to break if stress is placed on it. This is important so that the user can

break free if the equipment is caught on something underwater.

The lanyard is not designed to support the weight of the housing and

should not be used as a carrying strap. Carrying the housing by the

lanyard may result in damage to the lanyard and/or housing.

A different lanyard with a thin cord may be attached to the housing

using the lanyard mount on the corner of the housing.

Accessory Port

This housing features one spare accessory port which may be used

for the attachment of optional accessories. This port accepts ttings

designed for a 1/2” through or 1/2-20 threaded hole.

The optional Vacuum Kit # 47012 may be installed in this location. A

hand pump with gauge allows you to draw a vacuum on the house

to simulate water pressure and check for leaks prior to entering the

water.

Visit ikelite.com for an updated list of compatible products.

»Do not remove or loosen the accessory port plug unless you

are installing a compatible accessory.

Trigger Extension

The shutter lever may be extended to be closer to your hand when

using an optional tray with right-hand quick release handle. This

requires the Trigger Extension # 4077.93.

Trigger extension and tray with quick release handle are sold

separately.

Setting Up Your Camera

Pre-Installation Checklist

1. Insert a fully charged camera battery.

2. Insert a properly formatted memory card.

3. Remove any attached lanyard or neck strap.

Camera Settings

• Set Eye Sensor AF to “Off.”

• Set Eye Sensor LVF/Monitor Switch to “MON.”

• Set Touch Screen to “Off.”

• Set Flash Mode to “Forced ash on” when using an external

strobe.

• Set Red-Eye Removal to “Off” when using an external strobe.

• Set AF Assist Lamp to “Off” when using an external strobe.

Exposure Settings

Refer to the Cheat Sheets in the Photo School section of our website

for recommendations on exposure settings for a wide variety of

shooting situations:

https://www.ikelite.com/blogs/cheat-sheets

Adjusting Your Housing for ZS70, TZ90

This housing is pre-congured for operation with Panasonic Lumix

DC-ZS80, TZ95 cameras. If you are using one of the following

cameras you will need to make adjustments to several controls prior to

use:

• Panasonic Lumix DC-ZS70

• Panasonic Lumix DC-TZ90

»This housing is not compatible with any other Panasonic

cameras except as mentioned above.

Control Requiring Adjustment

• Mode dial

Adjusting the Control

1. The knob is attached by a set screw threaded into the side of the

knob. Remove the knob by loosening the set screw using a hex

key. Do not remove the control shaft from the housing.

2. Remove one nylon washer from the control shaft.

3. Align the knob set screw with the at on the side of the control

shaft.

Control at Washer

Set screw

Inhaltsverzeichnis

Andere Ikelite Kamerazubehör Handbücher

Ikelite

Ikelite 6146.10 Bedienungsanleitung

Ikelite

Ikelite DSC-V3 Bedienungsanleitung

Ikelite

Ikelite SD630 Bedienungsanleitung

Ikelite

Ikelite 6245.08 Bedienungsanleitung

Ikelite

Ikelite 71301 Bedienungsanleitung

Ikelite

Ikelite 6171.11 Bedienungsanleitung

Ikelite

Ikelite 4077.01 Technisches Datenblatt

Ikelite

Ikelite 6282.53 Betriebsanleitung

Ikelite

Ikelite S95 Betriebsanleitung

Ikelite

Ikelite 6973.03 Bedienungsanleitung

Ikelite

Ikelite ULTRAcompact Digital Housing A1000 IS Betriebsanleitung

Ikelite

Ikelite 6014.10 Betriebsanleitung

Ikelite

Ikelite 6042 Betriebsanleitung

Ikelite

Ikelite 6210.61 Betriebsanleitung

Ikelite

Ikelite Canon PowerShot A700 Bedienungsanleitung

Ikelite

Ikelite S3 Bedienungsanleitung

Ikelite

Ikelite ST1K Bedienungsanleitung

Ikelite

Ikelite 6951.07 Bedienungsanleitung

Ikelite

Ikelite C-575 Betriebsanleitung

Ikelite

Ikelite 6242.60 Canon SX600 HS Bedienungsanleitung

Ikelite

Ikelite DS51 Bedienungsanleitung

Ikelite

Ikelite 6870.80 Bedienungsanleitung

Ikelite

Ikelite 6170.12 Bedienungsanleitung

Ikelite

Ikelite 6282.35 Betriebsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung