IKUSI MAC 201 Bedienungsanleitung

MAC

AV-COFDM standalone modulator

User guide

201

REF. 4449

4 General safety instructions

4 Types of notices

5 Basic safety instructions

6 Introduction

6 General description

6 Main features

7 General use of the unit

9 Unit installation and conﬁguration

9 Installation

9 Power connection

10 Fast menu guide

11 Main menu

18 Advanced conﬁguration of the unit

18 User interface via web browser

20 Maintenance

20 Unit care

20 Troubleshooting

21 Technical speciﬁcations

21 MAC 201 model

22 Warranty

22 Unit recycling

23 CE Certiﬁcate

Contents

General safety instructions/Types of notices

General safety instructions

JRead all of this user manual carefully before plugging in the unit.

JAlways have these instructions to hand during installation.

JFollow all of the instructions and safety notices regarding unit handling.

Types of notices

The meaning of the safety notices used in this manual are described below.

DANGER OF DEATH OR INJURY

This safety notice indicates a possible danger for the life and health of people.

Not following these instructions may lead to serious consequences to health and

may even cause fatal injuries.

RISK OF DAMAGE TO THE UNIT

This safety notice indicates a possible dangerous situation. Not following these

instructions may lead to the unit being damaged.

NOTE

This type of notice is a note containing applicable advice and useful information

for optimum use of the unit.

HANDLING THE INSIDE OF THE UNIT IS FORBIDDEN

This notice forbids any work that may affect the working order of the unit or its

warranty.

DO NOT DISPOSE OF AS URBAN WASTE

This type of notice indicates that the unit must not be disposed of as unselected

urban waste.

DANGER

ATTENTION

General safety instructions/Basic safety instructions

Basic safety instructions

DANGER OF DEATH OR INJURY

JDo not install the unit during an electrical storm. This could lead to electro-

static discharge from lightning.

JDo not open the unit. There is a risk of electrostatic discharge.

RISK OF DAMAGE TO THE UNIT

JThe unit must be appropriately ventilated. Install the unit in a dust-free

location. Do not place the unit in a location where the ventilation slots are

covered or blocked. Install the unit in a location with at least 20 cm around it

free of other objects.

JDo not expose the unit to rain or moisture. Install the equipment in a dry

location with no inltration or condensation of water. Should a liquid enter

the unit, disconnect it immediately from the mains.

JKeep the unit away from ammable objects, candles and anything that may

cause a re.

JConnect the unit to an easily accessible power socket. In the event of an

emergency, it will then be possible to quickly unplug the unit.

JDo not expose the unit to sources of heat (sun, heating, etc.).

DANGER

ATTENTION

ENEN

Introduction/General description

Introduction

General description

Main features

The MAC 201 model is an AV analogue TV signal to COFDM digital TV signal standalone

modulator unit. Suitable for individual residential installations, it is an ideal solution for

the distribution of analogue video signals with COFDM digital TV modulation in a single

standalone unit.

The AV1 and AV2 signals are also serially digitalised, coded in MPEG2 and modulated in

COFDM. The COFDM base band signal is modulated on an RF carrier that can be adjusted

at the output to the VHF and UHF bands.

JProgramming:

FUser interface with LCD display and control button for basic conguration.

FUser interface from web browser via Ethernet connection.

FAll settings are automatically memorised.









    

   

KEY

1 Mains connector

2 Front panel with cluster map

3 Display (LCD)

4 Control button

5 Video input 1

6 Audio input L 1

7 Audio input R 1

8 Video input 2

9 Audio input L 2

10 Audio input R 2

11 Ethernet connector

12 TV Loopthrough input

13 TV COFDM output

Introduction/General use of the unit

FReprogrammable as many times as required.

FFirmware updated via Ethernet connection with web browser.

JSignal processing:

FDouble CVBS stereo video-audio input.

FSupported video standards: PAL/SECAM/NTSC.

FMPEG2 coding.

FRF DVB-T output, compatible with TDT.

FRF output, adjustable in VHF and UHF bands.

FLoopthrough for combination of additional RF TV signals.

JDimensions: 302 mm x 251 mm x 44 mm

JWeight: 1.5 kg

The main characteristics of the MAC 201 model are described below.

MAC 201 model

Recommended for individual residential installations, consisting of two AV inputs and one

RF VHF/UHF output that delivers an output level of >80dBV.

JInputs:

F2 CVBS video inputs with stereo audio.

FSupported video standards: PAL/SECAM/NTSC

FRF loopthrough input.

JProcessing:

FVideo: MPEG2.

FAudio: MPEG1 Layer II.

FQuality: DVD full D1.

FGenerates the PSI tables: PAT, PMT, SDT, NIT, TDT and TOT.

FLCN processing.

JOutputs:

FDVB-T output according to ETSI EN 300 744.

FOutput MER > 38dB (typical).

FBand aliasing < -45dB.

FOutput frequency bands: VHF + UHF.

FAverage output level 80dBV.

General use of the unit

Below is described how to operate the unit using the control button and interpret the visual

indications on the LCD display. The program comprises a main menu made up of sub-men-

us that can be selected to modify the basic operation settings of the unit.

Introduction/General use of the unit

Visual indications on the LCD display

This symbol visually indicates the possibility of moving vertically.

Vertical button movement

In the menus and submenus, move the button up or down to browse

upwards and downwards position by position.

In the settings, move the button up or down to modify values position by

position.

NOTE

Keep the button pressed up or down to browse or to modify

values more quickly.

Horizontal button movement

In the menus, move the button to the left or the right to select and go

back position by position.

In the settings, move the button to the left or the right to select and go

back position by position.

NOTE

Keep the button pressed to the left or to the right to browse

more quickly.

Press button

In the menus, this selects the submenu.

In the submenus, this selects the setting.

In the settings, this selects the parameter value.

Unit installation and conﬁguration/Installation

Unit installation and conﬁguration

The LCD display and the control button are sufcient for the basic settings of the unit.

Follow the steps indicated below to install the unit and congure the various parameters

accessible from the user interface on the LCD display.

Installation

RISK OF DAMAGE TO THE UNIT

Mechanical handling of the unit while

it is switched on may lead to it being

damaged. Do not plug the unit into the

mains before or during installation.

1) Fit and tighten the bolts and plugs securing

the unit to the wall.

2) Connect the AV1 and AV2 inputs in the re-

spective RCA connectors.

3) You can also connect the coaxial cable from

the RF loopthrough input (connector F).

4) Connect the coaxial cable from the output to

the unit (connector F).

Power connection

DANGER OF DEATH OR INJURY

Incorrect unit power connection may

cause an electric shock. Follow the

steps below for the electrical installation

of the unit.

1) Connect the earth cable.

2) Connect the power plug to the unit mains

connector.

3) Connect the power plug to the mains socket.

ATTENTION



video 1

audio L1

audio R1

video 2

audio L2

audio R2

TV (loopthrough)

TV+AV1+AV2 to distribution

network









DANGER

Unit installation and conﬁguration/Fast menu guide

Fast menu guide

Andere Handbücher für MAC 201

Inhaltsverzeichnis

Beliebte Modulator Handbücher anderer Marken

axing

axing AVM 5-00 Bedienungsanleitung

Wisi

Wisi MINI OM 10 Bedienungsanleitung

RCA

RCA CRF910 Bedienungsanleitung

Pico Macom

Pico Macom PM45 Bedienungsanleitung

FTE Maximal

FTE Maximal MODIG AIR Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-IP-32RF Bedienungsanleitung

Delphi

Delphi SA10003 Bedienungsanleitung

Elan

Elan MOD3000 Bedienungsanleitung

ClearView

ClearView SD4260 Bedienungsanleitung

Televes

Televes T.0X COFDM-QAM CI Bedienungsanleitung

Crucial Audio

Crucial Audio Die Gotterdämmerung Bedienungsanleitung

Pioneer

Pioneer CD-V61FM Bedienungsanleitung

Televes

Televes 554912 Bedienungsanleitung

Newtec

Newtec M6100 Bedienungsanleitung

ProTelevision

ProTelevision PT 5780 Bedienungsanleitung

Argent Cables

Argent Cables HD DVB-T MODULATOR Bedienungsanleitung

SSS Siedle

SSS Siedle BVM 650-0 Bedienungsanleitung

Multiplex

Multiplex CHANNEL PLUS 5615 Bedienungsanleitung