8
Manual transfer aids with handles, straps and buckles:
Manual transfer aids with high or low friction:
Manual transfer aids for sitting and lying transfer:
Thank you for choosing an Etac product.If the customer makes
adjustments, repairs or uses combinations not predetermined
by Etac, the Etac CE certication and Etac warranty will not be
valid.
Warranty: Two-year warranty on material and manufacturing
defects, provided that the product is used correctly. Before
taking a product into service always conduct a risk assessment
according to national and/or local legislation.
First inspection:
• Is the packaging intact?
• Read the label on the packaging and check the article no.
and product description.
• Check that Short Instruction is enclosed – updated
User Manual/Instruction for use can be downloaded from
www.etac.com or contact Etac Customer Service or your
local distributor.
• Check the label on the product - does it include article no.,
product description, lot/batch no., cleaning instructions
and supplier name?
Periodic Inspection:
• Make sure that your Manual transfer system is always in
perfect condition.
• After wash – always check materials, stitching, handles,
buckles.
• If the product shows signs of wear and tear, it must be
removed from service immediately.
Service information
Visual inspection/Check the product:
Ensure that the materials, seams, stitching,
handles, buckles are intact/faultless.
Mechanical load or stress/Test handles:
Pull hard on the handles in opposite directions
and check the material, seams and stitching.
Test buckles:
Lock the buckle and pull in opposite directions,
check the buckle and the stitching.
Class 1 - European Council
Directive MDD 93/42/EEC
on medical devices
The product can be
scrapped in accordance
with national regulations
Read the
User Manual
Stability test:
Try to bend the product and verify that it feels
rm, stable and solid.
Test low/high friction:
Place the product on a rm surface or a bed, place
your hands on the material and test the friction by
pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/movement
Inspection
Check
If in doubt, please contact Etac Customer Service or local
distributor for more information and guidance.
For more information about training and the use of these
products, contact the Etac transfer experts – www.etac.com.
