Impecca ISMO-1821 Bedienungsanleitung

Owner's Manual

Split Type Wall-mounted Air Conditioner

Model: ISMO-1821

Thank you for choosing our product.

For proper operation, please read and keep this manual carefully.

If you have lost the Owner’s Manual, please contact the local agent or

visit www.impecca.com for an electronic version.

v. 1.1

CONTENTS GENERAL INFORMATION

Technical Data

Electrical Connections

Installing The Outdoor Unit

Maintenance

Installation Dimension Diagram

Check After Installation

Bleeding

Conformity And Range

The Instructions Before Use

Name of Parts

Outdoor Unit Working Temperature Range

GENERAL

INSTALLER INFORMATION

The products in this manual may be different with the rea one, according to different models,l

some models have displayer and some models without displayer, the position and shape of

the displayer please refer to the real one.

In line with the company’s policy of continual product improvement, the aesthetic and dimensional

characteristics, technical data and accessories of this appliance may be changed without notice.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with the appliance.

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle

it responsibly to promote the sustainable reuse of material resources. To

return your used device, please use the return and collection systems or

contact the retailer where the product was purchased. They can take this

product for environmental safe recycling.

Explanation of Symbols

Indicates a hazardous situation that, if not avoided, will result in death

or serious injury.

Indicates a hazardous situation that, if not avoided, could result in death

or serious injury.

Indicates a hazardous situation that, if not avoided, may result in minor

or moderate injury.

Indicates important but not hazard-related information, used to indicate

risk of property damage.

Indicates a hazard that would be assigned a signal word

WARNING or CAUTION.

CONFORMITY AND RANGE GENERAL INFORMATION

Please read this owner's manual carefully before operating the unit and keep it carefully for consultation.

Only use the air conditioner as instructed in this booklet. These instructions are not intended to

cover every possible condition and situation. As with any electrical household appliance, common sense

and caution are therefore always recommended for installation, operation and maintenance.

Instructions for installation and use of this product are provided by the manufacturer.

THE INSTRUCTIONS BEFORE USE GENERAL INFORMATION

WARNING

When having a burning smell or

smoke,please turn off the power

supply and contact with the ser-

vice center.

If the abnormity still exists,the unit

may be damaged,and may cause

electric shock or fire.

Power must adopts the special

circuit to prevent fire.

Otherwise, it can cause electric

shock or fire.

Disconnect the power supply if

long putting the air conditioner

out of use.

Otherwise,the accumulated dusts

may cause overheating or fire.

Never damage the electric wire

or use the electric wire which is

not appointed.

Otherwise,it will cause overheating

or fire.

When cleaning,it is necessary

to stop driving and turn off the

power supply.

Cut off power supply

Otherwise,it may cause electric

shock or damage.

The power supply must adopt the

special circuit that with air switch

protection and assure it has enou-

gh capacity.The unit will be turned

on or off according to your requir-

ement automatically,please do not

turn on or turn off the unit freque-

ntly,otherwise disadvantage effect

may be caused to the unit.

Rated voltage of this air conditi-

oner 220-240V, 60Hz, The com-

pressor will vibrate sharply if the

voltage is too low, resulting in

damage to refrigerating system.

Electrical component are easy to

damage if the voltage is too high.

Don't attempt to repair the air

conditioner by yourself.

The wrong repair will lead to an

electric shock or fire,so you should

contact the service center to repair.

Don't step on the top of the

outdoor unit or place something

on it.

If it is damaged, it may lead to the

fall of the unit and cause the injury.

Please note whether the insta-

lled stand is firm enough or not.

Earthing: The unit must be reli-

ably earthed.The earthing cable

shall be connected to the spec-

ial earthing device in the const-

ruction.

As falling off the outdoor unit can be

dangerous.

Never cut off or damage power

cables and control wires. If the

power cable and signal control

wire were damaged, change

them by professional.

★ ★

★

★ ★

★

OUTDOOR UNIT

No. Description

1 Air outlet grille

2Valve

Be sure to cut off the power supply before cleaning the air conditioner; otherwise electric

shock might happen.

Wetting of air conditioner may cause the risk of electric shock. Make sure not to wash

your air conditioner in any case.

This product must not be disposed together with the domestic waste.

This product has to be disposed at an authorized place for recycling of electrical and

electronic appliances.

Volatile liquids such as thinner or gasoline will cause damage to the appearance of air

conditioner. (Only use soft dry cloth moist cloth clean the air conditioner cabinet).

The temperature of refrigerant circuit will be high,please keep the interconnection cable

away from the copper tube.

Note: The above figures are only intended to a simple

diagram of the appliance and may not correspond to the

appearance of the units that have been purchased.

NAME OF PARTS GENERAL INFORMATION

WARNING

Minimum power cord section

Fuse or air switch

890

362

700

MODE

2.5

ISMO-1821

Electricity supply

Electrical data 208/230V,60HZ

Size and clearance

TECHNICAL DATA GENERAL INFORMATION

OUTDOOR UNIT WORKING TEMPERATURE RANGE GENERAL INFORMATION

Maximum cooling

Maximum heating

48/-

27/-

OutdoorsideDB/WB( c)

INSTALLER

Wrong wire connection may cause malfunction of

some electric components.After fixing cable, ensure

that leads between connection to fixed point have

some space.

An all-pole disconnection switch having a contact

separation of at least 3mm in all pole should be

connected in fixed wiring.

2. Remove the cable clamp, connect the power connection

cable with the terminal at the row of connection and fix

the connection. The fitting line distributing must be

consistent with the indoor unit. terminal of line bank.

Wiring should meet that of indoor unit.

3. Fix power connection wire by wire clamp.

4. Ensure wire has been fixed well.

5. Install the handle.

unit (one screw).

The connection pipes and the connectiong wirings

of the unit A and unit B must be corresponding to

each other respective.

Note: the above figures are only intended to be a simple

diagram of the appliance and may not correspond to the

appearance of the units that have been purchased.

The appliance shall be installed in accordance with

national wiring regulations.

ELECTRICAL CONNECTIONS

1. Remove the handle at the right side plate of the outdoor

To the power supply

To unit B

Power cord

To unit A

connecting

cable

L1 L2

connecting

cable

Including an air switch with suitable capacity,

please note the following table. Air switch

should be included magnet buckle and heating

buckle function, it can protect the circuit-short

and overload. (Caution: please do not use the

fuse only for protect the circuit)

ISMO-1821 25A

Air switch capacityAir-conditioner

INSTALLING THE OUTDOOR UNIT INSTALLER

BLEEDING INSTALLER

Do not install the outdoor unit in pits or air vents

Installing the pipes

Use suitable connecting pipes and equipment for

the refrigerant R410A.

Vacuum pump

Humid air left inside the refrigerant circuit can cause com-

pressor malfunction. After having connected the indoor

and outdoor units, bleed the air and humidity from the

refrigerant circuit using a vacuum pump.

(1) Unscrew and remove the caps from the 2-way and 3-

way valves.

(2) Unscrew and remove the cap from the service valve.

(3) Connect the vacuum pump hose to the service valve.

(4) Operate the vacuum pump for 10-15 minutes until an

absolute vacuum of 10 mm Hg has been reached.

(5) With the vacuum pump still in operation, close the

low-pressure knob on the vacuum pump coupling.

Stop the vacuum pump.

(6) Open the 2-way valve by 1/4 turn and then close it

after 10 seconds. Check all the joints for leaks using

liquid soap or an electronic leak device.

(7) Turn the body of the 2-way and 3-way valves. Discon-

nect the vacuum pump hose.

(8) Replace and tighten all the caps on the valves.

Vacuum pump Vacuum pump

Location

Twisting moment (N.m)

35-40

60-65

45-50

70-75

Φ12

Φ19

Diameter (mm)

Φ9.52

Φ16

15-20Φ6

18K unit need to be installed the indoor unit

Caution: Installation Must be Performed in Accordance

with the NEC/CEC by Authorized Personnel Only.

conversion joint

18K MODE:

●

INDOOR

UNIT

Connect to the

indoor unit

Refrigerant fluid direction of fiow

3-way valve

2-way valve

inlet

(2)Turn

(8) Secure

(7)Turn to open fully

(2)Turn

(8) Secure

(6) Openby 1/4 turn

(7)Turn to open fully

(2)Turn

(8) Secure

Valve cap

Service

The refrigerant pipes must not exceed the maximum

heights 5m(1821K).

Wrap all the refrigerant pipes and joints.

Tighten the connections using two wrenches wor-

king in opposite directions.

Use bolts to secure the unit to a flat, solid floor.

When mounting the unit on a wall or the roof, make

sure the support is firmly secured so that it cannot

move in the event of intense vibrations or a strong

wind.

Install the drain fitting and the drain hose

(for model with heat pump only)

Condensation is produced and flows from the out-

door unit when the appliance is operating in the

heating mode. In order not to disturb neighbours

and to respect the environment,install a drain fitting

and a drain hose to channel the condensate water.

Install the drain fitting and rubber washer on the

outdoor unit chassis and connect a drain hose to it

as shown in the figure.

Model(m) 1821x2

Max. connection pipe length 20

Max. connection pipe length

(Simple one indoor unit) 10

Use suitable instruments for the refrigerant R410A.

Do not use mineral oils to clean the unit.

Ensure that the recommende dspace is left around the appliance.

The installation must be done by trained and qualified service personnel with reliability according to this

manual.

Contact service center before installation to avoid the malfunction due to unprofessional installation.

When picking up and moving the units, you must be guidedby trained and qualified person.

Do not use any other refrigerant than R410A.

●

MAINTENANCE INSTALLER

INSTALLATION DIMENSION DIAGRAM INSTALLER

30cm

or above

Space to the cover

200cm

50cm

30cm

(Air inlet side)

or above

Space to the wall

(Air outlet side)

or above

or more

Space to the cover

50cm

CHECK AFTER INSTALLATION INSTALLER

Check Items

Is the installation reliable?

Has the gas leakage been checked?

Is the thermal insulation of the unit

sufficient?

Is the drainage smooth?

Does the power supply voltage accord

with the rated voltage specified on the

nameplate?

Are the lines and pipelines correctly

installed?

Are the models of lines in conformity

with requirements?

Are there any obstacles near the air

inlet and outlet of the indoor and out-

door units?

Have the length of refrigerating pipe

and refrigerant charge amount been

recorded?

Has the unit been safely grounded?

Problems Owing to Improper Installation

The unit may drop, vibrate or make noises

May cause unsatisfactory cooling (heating)

effect

May cause condensation and water dropping

The unit may bread down or the components

may be burned out

The unit may bread down or the components

may be burned out

The unit may bread down or the components

may be burned out

The unit may bread down or the components

may be burned out

It is not easy to decide the charge amount

of refrigerant.

Risk of electrical leakage

CUSTOMER SUPPORT

Before contacting customer support, please see the troubleshooting guide above.

Visit our website to contact us, find answers to Frequently Asked Questions, and for other

resources which may include an updated version of this user's guide.

 WWW.IMPECCA.COM

If you wish to contact us by phone, please be sure to have your model number and serial

number ready and call us between 9:00am and 6:00pm ET, at +1 866-954-4440.

Keep tabs on Impecca's newest innovations & enter contests via our social network feeds:

www.facebook.com/Impecca/

 www.instagram.com/impecca/

@impeccausa

Inhaltsverzeichnis

Andere Impecca Klimaanlage Handbücher

Impecca

Impecca ISMO-3016 Bedienungsanleitung

Impecca

Impecca IPAC14-LS Bedienungsanleitung

Impecca

Impecca ISMI-C15 Bedienungsanleitung

Impecca

Impecca IPAC05-D2 Bedienungsanleitung

Impecca

Impecca IPAC-08K Bedienungsanleitung

Impecca

Impecca ITAC08-LSA23 Bedienungsanleitung

Impecca

Impecca IWA12-KM15 Bedienungsanleitung

Impecca

Impecca ITAC-08KS Bedienungsanleitung

Impecca

Impecca IPAC16-BRB Bedienungsanleitung

Impecca

Impecca IWAH25-KRB Bedienungsanleitung

Impecca

Impecca IWAH08-KRA Bedienungsanleitung

Impecca

Impecca ITAC-10KSA Bedienungsanleitung

Impecca

Impecca IWA15KSFP Bedienungsanleitung

Impecca

Impecca IWA06-QS30 Bedienungsanleitung

Impecca

Impecca IWA06-QR15 Bedienungsanleitung

Impecca

Impecca IPAC-12K Bedienungsanleitung

Impecca

Impecca IWA05-QS20 Bedienungsanleitung

Impecca

Impecca IWA15-QS30 Bedienungsanleitung

Impecca

Impecca Flex Series Bedienungsanleitung

Impecca

Impecca IWA05KSP Bedienungsanleitung

Impecca

Impecca ITAC-08KS21 Bedienungsanleitung

Impecca

Impecca IPAC08-DR Bedienungsanleitung

Impecca

Impecca ISAH-2418B1 Bedienungsanleitung

Impecca

Impecca IWA05-CM15 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Spheros

Spheros CC 355 Bedienungsanleitung

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Bedienungsanleitung

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Samsung

Samsung AR KV Series Leitfaden

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

Hitachi

Hitachi RAS-E24CAK Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Hisense

Hisense 7K Technisches Handbuch

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung