Impecca HSB120 Bedienungsanleitung

Bluetooth Stereo Headphones

with built-in MP3 Player

Model No: HSB120

Operating Instructions

Read the following notices and information carefully

to ensure proper operation of your Bluetooth® Stereo

Headphones.

This manual is solely provided for informational

purposes and in no way constitutes a legally binding

document between the manufacturer, distributor, and

consumer.

INTRODUCTION:

Congratulations on your purchase of the Impecca

Bluetooth® Stereo Headphones (HSB120). Before using

your speaker system, please read through this manual.

This manual will help you use many of the exciting and

useful features of your new unit.

WARNING

PLEASE READ THIS MANUAL CAREFULLY BEFORE

OPERATING AND RESERVE IT FOR FUTURE

REFERENCE. IT WILL BE HELPFUL TO YOU IF YOU

ENCOUNTER ANY OPERATING PROBLEMS.

WARNING: To reduce the risk of electric shock, do not

disassemble the unit. There are no user-serviceable

parts inside. Contact technical support for further

assistance.

WARNING: To prevent fire or electric shock hazard, do

not expose the unit to rain or moisture.

Do not expose the adapter and Bluetooth® Stereo

Headphones to any water (including drips or splashes).

Objects filled with liquids, such as vases and water

bottles, should not be placed on or near the unit.

Keep the Bluetooth® Stereo Headphones away from

direct sunlight and heat sources such as radiators or

stoves.

Do not place the Bluetooth® Stereo Headphones on an

unstable table, stand, tripod, bracket or cart. The unit

may fall, resulting in possible damage or injury.

Dispose of this unit properly respecting your local laws

for electronics and battery disposal.

CAUTION: Danger of explosion if battery is incorrectly

replaced. Internal battery is sealed and not intended to

be replaced by consumer.

WARNING: The battery shall not be exposed to

excessive heat such as sunlight, fire or any other heat

source.

WARNING: Only use attachments/accessories provided

by the manufacturer.

European Union Electronic Waste Disposal

Guidelines:

This symbol means that used electrical and electronic products should not

be mixed with general household waste. For proper treatment, recovery and

recycling, please take this product(s) to designated collection points where it

will be accepted free of charge. Alternatively, in some countries you may be

able to return your products to your local retailer upon purchase of an

equivalent new product. Disposing of this product correctly will help save

valuable resources and prevent any potential negative effects on human

health and the environment, which could otherwise arise from

inappropriate waste handling. Please contact your local authority for further

details of your nearest designated collection point. Penalties may be

applicable for incorrect disposal of this waste, in accordance with you

national legislation.

Package Contents

Bluetooth® Stereo Headphones

USB (Type-A) to mini-USB

3.5mm (1/8”) male-to-male audio

cable (1.2 meter length)

User’s manual

Buttons and Ports Description

Right-Side ear cup and unit control panel

Play/Pause

/Mode

Track

Volume

down

Next Track

Volume Up

Features

1) Uses Bluetooth® for music streaming from

your smartphone, tablet or other

Bluetooth® compatible music source.

2) Built-in MP3 player can play music directly

from a microSD card (supports SDHC

cards)

3) Standard 3.5mm (1/8”) connection cable

allows you to use these headphones as

wired headphones for devices that don’t

have Bluetooth® compatibility.

4) Built-in rechargeable Li-ion battery allows

for completely cord-free operation.

5) Ability to control source unit from the

speaker system –Play, Pause, Previous

track, Next track, etc. Note: This works when

using Bluetooth ® and microSD MP3 files, but

not when using the wired connection cord to an

analog music source.

Getting Started and Bluetooth® Pairing

1) Charge your unit by plugging the

(included) mini-USB end of the

connection cable into the back of the unit

and USB-A end of the cable into a

computer or powered USB wall adapter

(not included).

2) While charging, you will see a red LED

shining through the small hole beneath

the logo on the right-side ear cup.

When finished, the LED should go out.

3) To power on unit, slide rocker switch on

the rim of the right-side ear cup from

“OFF” to “ON.”

4) Your HSB120 supports two different

modes. Bluetooth mode and microSD

mode. When entering Bluetooth mode,

you will hear a three-tone sound. When

entering microSD mode, you will hear a

steady tone. To switch between Bluetooth

and microSD modes, hold down the mode

( ) button for 2-3 seconds.

Pairing Bluetooth®

1. When in “Bluetooth® Mode”there should

be a blue LED flashing quickly. This shows

that the unit is in pairing mode.

2. On your source device (phone, MP3

player, tablet), start a “search for devices”

in your “Bluetooth” menu. The exact

method varies from device to device.

3. After a few moments, you should see a

device labeled “HSB120” in the list of

found devices. This is the device you

should select.

4. You should hear a two-tone sound from

the headphones (if you’re wearing them)

if the connection is successful. At this

point the blue LED should be steadily lit

(not blinking) as long as your device is

connected.

5. If your device moves sufficiently out of

range, or Bluetooth® is turned off, the

headphones will emit a different three-

tone sound and the blue LED will begin to

flash rapidly. Moving back into range

should yield a two-tone sound again and

reconnect to your source device

automatically.

6. Note: Once you have paired to a

particular device, you should not have to

pair again, unless the device lost the

settings. Upon powering on in the future

(or switching back to Bluetooth® from

“microSD card mode,” you will hear the

three tone sound. However, after about

five seconds, you should hear a two-tone

sound, informing you that the devices are

connected. If you do not hear this sound,

simply select the HSB120 from the

Bluetooth menu of your device.

Playing Music

1) To play music using a Bluetooth® device,

first make sure you have paired your

Bluetooth® compatible device with the

HSB120 Bluetooth® headphones (see

directions above). If not already in

Bluetooth® Mode, choose it by holding

down the mode ( ) button for a few

seconds until you hear the three-tone

sound. Then, on your device, begin

playing whatever song you like as if you

were listeing to it direclty on your device

(or via wired headphones). The music

should play through the HSB120

headphones.

2) To play music from microSD card, simply

insert a card containing MP3 music into

the slot embedded into the right ear cup

(see picture on page 3). You will hear a

breif tone. (See Controlling Music

Playback below for more details.)

3) To play music from a wired connection

(known as “line-in mode”), simply connect

the included 3.5mm cord from the jack on

the bottom of your right ear cup to the

Inhaltsverzeichnis

Sprachen:

Andere Impecca Kopfhörer Handbücher

Impecca

Impecca EB-503BT Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung