IMV K2-CE Bedienungsanleitung

Vibration Control System

K2-CE

K2Sprint-CE

Common Part TYPE II

Instruction Manual

IMV CORPORATION

Type of Document : Instruction Manual

System Applied : K2/K2Sprint

Application Software later than Version 14.4.0

Device Driver later than Version 11.1.0

Note) If the hardware used is the old type system, its specifications

conform to those of the old type system.

English Edition

Version Date Contents

11.0.0 2013.11.29 First edition

11.0.1 2014.01.18 Correction of required computer environment

11.1.0 2014.12.05 Additional description of initial setting of 3D graph(Waterfall graph and Color

map), modified description of Print

12.0.0 2015.03.02 Complete revision of “Installation and system startup”, modified description

of ”Startup and finishing of application”, additional description of auxiliary

information display in graph

12.2.0 2015.10.30 Additional description of Quick Report, correction of misprints

12.3.0 2016.01.25 Addition of IEPE sensor stabilization waiting function, addition of requirements

for PC

13.0.0 2016.04.20 Applied to Windows10, modified description of requirements for PC, additional

description of Launcher, modified description of ”European Directive”

13.1.0 2016.07.29 Additional description of toolbar button customizing function, applied ‘Graph

display function on Excel’ to Excel2016, applied ‘Report

Generator’ to Word2016, correction of misprints

13.2.0 2016.10.31 Modified description of ” Installation of Application”, correction of misprints

13.3.0 2017.03.01 Correction of misprints

13.6.0 2017.10.02 Additional description of Viewer (function to restore the display configuration,

overlaid graph file selection method), additional description of automatic

adjustment of legend length

13.6.1 2017.10.18 Correction of misprints

13.6.2 2017.12.20 Additional description of specification in English units(inch-pound units),

additional description of EU DECLARATION OF CONFORMITY, correction

of misprints

14.1.0 2018.04.27 Additional description of German version, pallet tool icon and graph tool icon,

E-Mail sending function, correction of misprints

14.2.0 2018.09.10 Additional description of function to mark cursor data

14.2.1 2018.12.06 Add DVD-ROM as the recording media for installers

14.3.0 2019.04.19 Modified description of excitation system information, modified description of

Launcher operating setting, additional description of Calibration, correction of

misprints

14.4.0 2019.09.20 Addition of intended use judgment function, addition of test record, additional

description of Contact input signal (Skipping to the beginning of the next sweep

/ Skipping to the first spot) ,modified description of requirements for PC, applied

‘Graph display function on Excel’ to Excel2019, applied ‘Report

Generator’ to Word2019, correction of misprints

CONTENTS

Chapter 1 General information............................................................. 1-1

1.1 Before Using this System .......................................................... 1-1

1.2 Safety Precautions ................................................................ 1-2

1.2.1 Cautions .................................................................... 1-2

1.2.2 Warning Indication .......................................................... 1-3

1.3 Hardware Configuration ............................................................ 1-6

1.3.1 Computer .................................................................... 1-6

1.3.2 Dedicated Hardware I/O Unit ................................................. 1-7

1.4 Equipment Specification and Operation Conditioon................................... 1-9

1.4.1 K2 .......................................................................... 1-9

1.4.2 K2Sprint .................................................................... 1-10

1.5 Hardware Specifications ........................................................... 1-11

1.5.1 Specifications .............................................................. 1-11

1.5.2 Dedicated Hardware .......................................................... 1-15

1.6 Software Configuration ............................................................ 1-18

1.6.1 OS .......................................................................... 1-18

1.6.2 Application Software ........................................................ 1-18

Chapter 2 System Set Up and Maintenance................................................... 2-1

2.1 Installation ...................................................................... 2-1

2.1.1 Environment for Installation ................................................ 2-1

2.1.2 Installation of K2 Interface Board .......................................... 2-1

2.1.3 Connection to PC ............................................................ 2-2

2.1.4 Connection to Excitation System ............................................. 2-2

2.1.5 Setting of PC ............................................................... 2-3

2.2 Installation of Software .......................................................... 2-4

2.2.1 Installation of License ..................................................... 2-5

2.2.2 Installation of Application ................................................. 2-9

2.2.3 Installation of Manual ...................................................... 2-20

2.3 Uninstallation of Software ........................................................ 2-25

2.3.1 Uninstall or change a program ............................................... 2-25

2.3.2 Uninstallation of License ................................................... 2-31

2.3.3 Uninstallation of Application ............................................... 2-33

2.3.4 Uninstallation of Manual .................................................... 2-35

2.4 Update of Software ................................................................ 2-37

2.5 Other Settings .................................................................... 2-38

2.5.1 Emergency Stop Input Contact ................................................ 2-38

2.5.2 Changing of Input Mode ...................................................... 2-39

2.5.3 ID Setting for Each Module .................................................. 2-39

2.6 Startup and Stopping of System .................................................... 2-40

2.6.1 Startup of System ........................................................... 2-40

2.6.2 Stopping of System .......................................................... 2-40

2.7 Inspection and Maintenance ........................................................ 2-41

2.7.1 IMV’s Inspection Policy ..................................................... 2-41

2.7.2 Daily Inspection ............................................................ 2-41

2.7.3 Yearly Inspection ........................................................... 2-42

2.7.3.1 Performance Check..................................................... 2-42

2.8 Warranty and After-sales Services ................................................. 2-50

2.8.1 Warranty.................................................................... 2-50

2.8.2 Customer Support ............................................................ 2-51

2.8.3 Contact Form ................................................................ 2-52

Chapter 3 Setting of K2 System ........................................................... 3-1

3.1 Environment Setting ............................................................... 3-1

3.2 I/O Module Configuration .......................................................... 3-1

3.3 Excitation Information ............................................................ 3-2

3.3.1 Excitation System Information name .......................................... 3-2

3.3.2 Drive Output ................................................................ 3-2

3.3.3 Polarity.................................................................... 3-2

3.3.4 Initial Output Voltage Default Value ........................................ 3-3

3.3.5 Rating Information .......................................................... 3-3

3.3.5.1 Load from system model................................................ 3-3

3.3.6 Control Frequency Range is limited .......................................... 3-3

3.3.7 Other Control Quantities .................................................... 3-3

3.3.8 Contact I/O ................................................................. 3-3

3.3.9 Armature mass ............................................................... 3-4

3.4 Input Channel Information ......................................................... 3-5

3.4.1 Input Environment Information Name .......................................... 3-5

3.4.2 Name (Channel Name) ......................................................... 3-5

3.4.3 Module / Ch. ................................................................ 3-6

3.4.4 Quantities .................................................................. 3-6

3.4.5 Input Type .................................................................. 3-6

3.4.6 Sensitivity ................................................................. 3-6

3.4.7 Polarity.................................................................... 3-7

3.4.8 TEDS Access ................................................................. 3-7

Chapter 4 Fundamental Operation Method ................................................... 4-1

4.1 Outline ........................................................................... 4-1

4.2 Fundamental Operation ............................................................. 4-2

4.2.1 Application Start Up ........................................................ 4-2

4.2.2 Exit from Application ....................................................... 4-3

4.2.3 Description of Icons ........................................................ 4-5

4.2.4 File Operation .............................................................. 4-8

4.2.4.1 File Open ............................................................. 4-8

4.2.4.2 Save As ............................................................... 4-9

4.2.5 Add a Page .................................................................. 4-10

4.2.6 Palette Operation ........................................................... 4-12

4.2.6.1 Palette Tool Icons .................................................... 4-12

4.2.6.2 Moving the Palette .................................................... 4-13

4.2.7 Other Operations ............................................................ 4-14

4.2.7.1 Set Up ................................................................ 4-14

4.2.7.2 Operation Status ...................................................... 4-15

4.2.7.3 Manual Operation ...................................................... 4-15

4.3 Graph Operation ................................................................... 4-16

4.3.1 Graph Tool Icons ............................................................ 4-16

4.3.2 Selecting of Graph Display .................................................. 4-17

4.3.2.1 Selecting of 3D graph ................................................. 4-19

4.3.3 Scale ....................................................................... 4-25

4.3.3.1 3D graph scale change ................................................. 4-27

4.3.4 Cursor Display .............................................................. 4-28

4.3.4.1 Double cursor display ................................................. 4-29

4.3.4.2 Peak search ........................................................... 4-30

4.3.4.3 Registration of cursor data ........................................... 4-31

4.3.4.4 Cursor display in 3D graph ............................................ 4-33

4.3.5 Graph Change ................................................................ 4-34

4.3.6 Peak Mark ................................................................... 4-35

4.3.7 Graph Color Setting ......................................................... 4-36

4.3.7.1 Change Graph Color .................................................... 4-36

4.3.7.2 Change of Auxiliary Information ....................................... 4-37

4.3.7.2.1 Test Beginning/Ending Time ...................................... 4-37

4.3.7.2.2 Peak Mark....................................................... 4-38

4.3.7.2.3 Legend Width.................................................... 4-38

4.4 Output to the Printer ............................................................. 4-39

4.4.1 Print ....................................................................... 4-39

4.4.2 Printer Setting ............................................................. 4-41

4.4.3 Page setup .................................................................. 4-42

4.4.4 Print Color Setting ......................................................... 4-43

4.5 File Conversion ................................................................... 4-45

4.5.1 File conversion to CSV ...................................................... 4-45

4.5.2 Graph display on Excel ...................................................... 4-48

4.6 Selecting languages（option） ..................................................... 4-49

4.7 Test Definition File .............................................................. 4-50

4.7.1 Saving Live Data in Operation ............................................... 4-50

4.7.2 Deleting of Testing Operation Relational Data ............................... 4-51

4.7.3 Another Excitation System Information loading ............................... 4-53

4.7.4 Input Environment Information ............................................... 4-55

4.7.5 New Input Environment Information Loading ................................... 4-55

4.7.6 New Input Environment Information Saving .................................... 4-56

4.8 Contact I/O Information ........................................................... 4-57

4.8.1 Outline..................................................................... 4-57

4.8.2 Contact I/O setting ......................................................... 4-58

4.8.3 Contact I/O signal Setting .................................................. 4-61

4.9 IT Function ....................................................................... 4-66

4.9.1 Web Monitor ................................................................. 4-66

4.9.2 E-Mail Sending Function ..................................................... 4-69

4.9.3 Report Generator (Auto-generating function of the testing result report) .... 4-73

4.9.4 Quick Report ................................................................ 4-84

4.10 Waiting for Stabilization of IEPE Sensor ......................................... 4-87

4.11 Customizing Toolbar Buttons ...................................................... 4-88

Chapter 5 Energy-saving operation: ECO-option (ISM) ...................................... 5-1

5.1 Outline ........................................................................... 5-1

5.2 Constraints in operation .......................................................... 5-1

5.2.1 Constraints in SINE ......................................................... 5-1

5.2.2 Constraints in RANDOM ....................................................... 5-2

5.3 (This section is left blank intentionally.) ....................................... 5-3

5.4 Settings for ECO-option ........................................................... 5-4

5.4.1 Initial setting (factory setting) ........................................... 5-6

Chapter 6 Data Viewer .................................................................... 6-1

6.1 Outline ........................................................................... 6-1

6.2 Operation example ................................................................. 6-3

6.2.1 Description of Icons ........................................................ 6-3

6.2.2 Display of Standard Graph ................................................... 6-5

6.2.3 Display of Overlaid Graph ................................................... 6-7

6.2.3.1 Select on Tree Display................................................ 6-7

6.2.3.2 Select on Dialogue Display............................................ 6-11

6.2.4 Display of 3D graph ......................................................... 6-16

6.3 Supplemental Explanation .......................................................... 6-21

6.3.1 Set Up...................................................................... 6-21

Chapter 7 Launcher ....................................................................... 7-1

7.1 Outline ........................................................................... 7-1

7.1.1 Precautions for ‘Standards’Mode and ‘Test Files’Mode ....................... 7-2

7.1.1.1 Preparation ........................................................... 7-2

7.1.1.2 Change of Excitation System Information ............................... 7-2

7.1.1.3 Limit of Control Channel .............................................. 7-2

7.2 Operation Example ................................................................. 7-3

7.2.1 ‘Applications’mode .......................................................... 7-3

7.2.2 ‘Standards’Mode ............................................................. 7-6

7.2.3 ‘Test files’mode ............................................................ 7-11

7.3. Supplementary Explanation ........................................................ 7-16

7.3.1 Registration and Deletion of Standard Items ................................. 7-16

7.3.1.1 Registration of Test Files as Standards ............................... 7-16

7.3.1.2 Deletion of Registered Standards ...................................... 7-19

7.3.2 Supplementary Explanation of Standards Mode ................................. 7-20

7.3.2.1 Contents Displayed on Screen .......................................... 7-20

7.3.2.2 Finding of Standards .................................................. 7-21

7.3.2.3 Test summary Information Registered in Saved Test File ................ 7-23

7.3.2.4 Setting of control channel ............................................ 7-24

7.3.2.4.1 Use the original sensitivity of input environment information ... 7-24

7.3.2.4.2 Modify the sensitivity of input environment information ......... 7-24

7.3.3 Supplementary Explanation of Test Files Mode ................................ 7-25

7.3.3.1 Folder ................................................................ 7-25

7.3.3.1.1 Contents Displayed on Screen .................................... 7-25

7.3.3.1.2 Test summary Information Registered to Saved Test File .......... 7-26

7.3.3.2 History ............................................................... 7-27

7.3.3.2.1 Contents Displayed on Screen .................................... 7-27

7.3.3.2.2 Test summary Information Registered to Saved Test File .......... 7-27

7.3.3.3 Favorite .............................................................. 7-28

7.3.3.3.1 Contents Displayed on Screen .................................... 7-28

7.3.3.3.2 Test summary Information Registered to Saved Test File .......... 7-28

7.3.3.4 Setting of control channel ............................................ 7-29

7.3.3.4.1 Use the original setting of the selected test file without

modification.............................................................. 7-29

7.3.3.4.2 Modify the setting of the selected test file .................... 7-29

7.3.3.4.3 Use the top information of the input environment information list

.......................................................................... 7-30

7.3.4 Quick Help .................................................................. 7-31

7.3.5 Operating Setting ........................................................... 7-33

7.3.5.1 Setting Procedures .................................................... 7-33

7.3.5.2 Setting Item .......................................................... 7-34

Chapter 8 Calibration..................................................................... 8-1

8.1 Outline ........................................................................... 8-1

8.2 Operation Example ................................................................. 8-2

8.2.1 Voltage input sensitivity test .............................................. 8-2

8.2.2 Charge input sensitivity test ............................................... 8-3

8.2.3 Simple diagnosis of the excitation system ................................... 8-4

Chapter 9 Intended Use Judgment Function .................................................. 9-1

9.1 Outline ........................................................................... 9-1

9.2 Operation Example ................................................................. 9-2

9.2.1 Procedures .................................................................. 9-2

Chapter 10 Test Record .................................................................... 10-1

10.1 Outline .......................................................................... 10-1

10.2 Operation Example ................................................................ 10-2

10.2.1 Startup.................................................................... 10-2

10.2.2 Operation on Screen ........................................................ 10-3

10.2.3 Other Operations ........................................................... 10-4

10.3 Option ........................................................................... 10-5

10.3.1 Set Up..................................................................... 10-5

10.3.2 SecuritySetting ............................................................ 10-6

10.3.3 Selection of Column ........................................................ 10-6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IMV Steuerungssystem Handbücher

IMV

IMV K2 Bedienungsanleitung

IMV

IMV K2 Bedienungsanleitung

IMV

IMV K2 Bedienungsanleitung

IMV

IMV K2 Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung