Inateck BCST-70 Bedienungsanleitung

User Guide

BCST-70 Barcode Scanner

English · 日本語 · Deutsch · Français · Italiano · Español

Power Switch /

Netzschalter /

電源スイッチ /

Interrupteur d'alimentation /

Interruttore alimentazione /

Interruptor de alimentación

Laser Window /

Laserfenster /

読み取り窓 /

Faisceau Laser /

Finestra laser /

Ventana láser

Trigger /

Auslöser /

トリガー /

Trigger /

Pulsante scan /

Gatillo

Buzzer /

Signaltongeber /

ブザー /

Buzzer /

Segnale buzzer /

Señal de alerta

USB Port /

USB Anschluss /

USB ポート /

Port de USB /

USB Port /

Puerto USB

LED1

LED2

Shockproof Cover /

Stoßfeste Abdeckung /

耐衝撃カバー /

Couverture anti-choc /

Scocca anti urti /

Protección anti golpes

EN Use of Inateck BCST-70

Startup

Note:

1) Inateck BCST-70 will start sleep mode if there is no operation on it over 3 minutes.

Short press on the trigger can wake it up.

2) Bluetooth connection will be disrupted when the distance between BCST-70 and

the connected device is beyond the valid transmission range. Scanning result will

be saved in the bu󱐯er of BCST-70. Quickly double press on the trigger can upload

data from bu󱐯er.

Bluetooth Mode(HID):

1. Power on Inateck BCST -70 by toggling switch from OFF to ON.

2. Scan “Enter Setup” barcode and then “Bluetooth Pairing”, BCST-70 will enter

Bluetooth pairing status.

Enter Setup Bluetooth Pairing

3. Enable the Bluetooth of the device to be connected, e.g. PC, cellphone or tablet.

You can do that like below.

Windows XP: Click Control Panel->Printers and Other Hardware->Add Bluetooth

Device

Windows 7/8/8.1: Click Control Panel->Add Devices

Windows 10: Click Setting->Devices->Bluetooth

macOS:Click System Preference->Bluetooth

iOS: Click Setting->Bluetooth

android: Clik Setting->Bluetooth

Enable the Bluetooth on host device and it will automatically search for BCST-70.

After a few seconds ‘BCST-70******’ will appear in the list of available devices. Pair

the two devices. A chords sound means successful pairing.

4. Open a le on computer and move cursor to the blank where scanning output

should be placed. Scanning results can be displayed on computer then.

Note:

1) Normally BCST-70 can re-connect to previously connected device automatically.

If it fails, please remove the paring history of BCST-70 in the list of host device.

Afterwards, pair them again.

2) HID and SPP are two modes of Bluetooth. The pairing method mentioned above

refers to HID, which is the most commonly used mode. If you want to use BCST-70

under SPP mode, please contact our customer service.

Wired Mode:

Scan“Enter setup”barcode;

Scan “Exit with save” barcode

to nish the setup.

Change scanner setting by

scanning certain function

setup barcode;

1. Connect Inateck BCST-70 with computer via USB cable

2. Power on Inateck BCST-70 by toggling switch from OFF to ON and short press

the trigger. Inateck BCST-70 will continuously beep. Beep stops after successful

connection.

3. Open a le on computer and move cursor to the blank where scanning output

should be placed. Scanning results can be displayed on computer then.

Function Setup

(Note: The barcode marked by “*”means default setting of Inateck BCST-70.)

Users must read setup barcodes in order to change the default settings in Inateck

BCST-70 Barcode Scanner.

EN Status indication

Buzzer Indication

LED Indication

Beeping Meaning

One short high note（100ms） Read barcode successfully

One short high note（20ms） Data upload from scanner to Computer

One long high note（400ms） Wrong Setup （on setup status, blue LED stays on）

Invalid scanning due to full bu󱐯er (Scanned barcode not saved.)

Pairing Failure (Occurs only during the pairing process)

Two or more long high tones（800ms） USB being congured（It happens when USB cable is inserted）

Three chord sounds Enter setup mode（Blue LED on）

Exit setup mode（Blue LED o󱐯）

Two short notes（tone from low to high） Correct Setup

Two short beeps (tone from high to low) The connection between Inateck BCST-70 and computer is disrupted.

Chords sound（high to low） Prompt successful Bluetooth connection

Two short tones Prompt disruption of Bluetooth connection

Indicator color Meaning

Green LED ashes once (LED2) Barcode successfully read and uploaded to computer

Blue LED ashes once (LED2) Barcode successfully read and saved in bu󱐯er, but not uploaded to computer

Blue LED stays on (LED2) Inateck BCST-70 scanner on setup status

Yellow LED blinks（light/shade ratio0.5s :

0.5s） (LED1)

Low battery

Red LED stays on (LED1) Inateck BCST-70 scanner in charge (Red LED o󱐯 when battery is full)

Flashing green light Ever paired but not successfully connected this time

Frequently Used Barcodes

Exit without Save

Enter Setup

Restore Factory Setting

Exit with Save

（*）Enable Auto Laser-darkening Mode

Upper case for all letters

Mute

(*)Medium Volume

(*) Enable HID Mode

Enable Continuous Scanning Mode

（*）Enable Auto-sleep Mode

Lower case for all letters

Enable Manual Scanning Mode

（*）Keep original case

Minimum Volume

Maximum Volume

Enable SPP Mode

Enable Auto Induction Mode

Disable Auto-sleep Mode

（*）Apply Enter for Su󱐰x Do Not Apply Enter for Su󱐰x

(*) Windows / Android Mac os / ios

Setting for Keyboard Language

BCST-70 is compatible with Windows, Android, mac OS and iOS. Under default

setting it is compatible with Windows and Android. If you need use it with other OS,

please select and scan corresponding barcodes below.

Note:

1) When use BCST-70 with iOS devices, long press the trigger to pop virtual keyboard.

An additional long press can have it hidden.

2) When use BCST-70 with Android device, please use Gboard (Google) as the input

method, and set the keyboard of BCST-70 to “US Keyboard”.

Please set keyboard like below:

1. Read ’Enter setup’ Barcode

2. Select and Scan your keyboard language Barcode

Enter Setup

French Keyboard

Italian Keyboard

（*）US Keyboard

Spanish Keyboard

English (UK) Keyboard

German Keyboard

Japanese Keyboard（Roman alphabet） Canadian Keyboard

3. Scan“Exit with Save” Barcode to end language setting

Note: The keyboard language of Inateck BCST-70 should keep consistent with that on

computer, otherwise, garbled might appear in scanning result.

Setting for Prex/Su󱐰x

Users can add prex/su󱐰x to scanning result. The prex/su󱐰x can have 1 to 32 digits.

More details are as below.

1. Scan “Enter setup’” Barcode

2. Scan “Prex Setting” or “Su󱐰x Setting”

3. Scan the character barcode (32 characters at the most). For instance, “H#” is the

prex/su󱐰x to be added to the scanning result, scan the character barcode of “H”

and “#” below.

4. Scan “Exit with Save” Barcode to end the setting

Exit with Save

Prex Setting

Enter Setup

Su󱐰x Setting

H #

EN Frequently Used Prex/Su󱐰x Barcodes

Note:

Scanning result will come with prefix/suffix after the setting. Nevertheless, prefix/

su󱐰x can be hidden or recovered. To hide prex/su󱐰x, scan “Enter Setup” barcode,

“Hide Prefix/Suffix” barcode, and then “Exit with Save” barcode. To recover prefix/

su󱐰x, scan “Enter Setup” barcode, “Recover Prex/Su󱐰x” barcode, and then “Exit with

Save” barcode.

Enter

Tab

Space

Backspace

（*）Recover Su󱐰x

（*）Recover Prex

Hide Su󱐰x

Hide Prex

Delete Character(s) on Output Result

Inateck BCST-70 can help users delete character(s) on output result, either beginning

characters or the ending ones. 0 to 99 digits can be deleted. As default setting, no

character, or say 0 digit is deleted as output result. More details are as below.

1. Scan “Enter Setup” Barcode

Enter Setup

Andere Handbücher für BCST-70

Inhaltsverzeichnis

Sprachen:

Andere Inateck Barcode-Lesegerät Handbücher

Inateck

Inateck BCST-55 Bedienungsanleitung

Inateck

Inateck BCST-50 Bedienungsanleitung

Inateck

Inateck BCST-33 Bedienungsanleitung

Inateck

Inateck BCST-54 Bedienungsanleitung

Inateck

Inateck BCST-60 Bedienungsanleitung

Inateck

Inateck P6 Bedienungsanleitung

Inateck

Inateck P7 Bedienungsanleitung

Inateck

Inateck P6 Bedienungsanleitung

Inateck

Inateck BCST-10 Bedienungsanleitung

Inateck

Inateck BCST-50 Anleitungen und Rezepte

Inateck

Inateck BCST-60 Bedienungsanleitung

Inateck

Inateck BCST-73 Bedienungsanleitung

Inateck

Inateck BCST-10 Bedienungsanleitung

Inateck

Inateck BCST-20 Bedienungsanleitung

Inateck

Inateck BCST-20 Bedienungsanleitung

Inateck

Inateck BCST-41 Bedienungsanleitung

Inateck

Inateck BS01001 Bedienungsanleitung

Inateck

Inateck BCST-70 Bedienungsanleitung

Inateck

Inateck BCST-91 Bedienungsanleitung

Inateck

Inateck BCST-50 Bedienungsanleitung

Inateck

Inateck BCST-91 Bedienungsanleitung

Inateck

Inateck BCST-53 Bedienungsanleitung

Inateck

Inateck BCST-54 Bedienungsanleitung

Inateck

Inateck BCST-54 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung