infaco F3020 Bedienungsanleitung
Item: DSES F3020
DSES Safety system
Instructions
US
OTHER LANGUAGES
2
Warnings before use 4
Setting up 5
System operation check 11
System shutdown 14
Additional functions 15
DSES fault indication 15
Very important 17
contents
3
BEFORE USING THIS KIT:
Your pruning shear is configured to use
the WIRELESS safety system by default.
The supplied hard-wired safety system
requires special pruning shear settings to
operate.
IT IS THEREFORE ESSENTIAL to contact an
approved INFACO dealer to set up this
option.
Using the pruning shear with this safety
system will disable the WIRELESS safety
system.
4
Warnings before use
It is mandatory for users to wear a conductor glove (INFACO brand) on the
hand not holding the pruning shear.
The conductor glove sends data to the electronics to open the pruning shear
blades if it comes into contact with the cutting head.
It is essential to only use INFACO brand
conductor gloves:
DSES glove on the hand not holding the pruning shear
ref. 355G29 (for right-handed users) / ref: 355G29G (for left-handed users)
Sizes: 7 to 12
• For all the following operations it is imperative to
disconnect the pruning shears.
• No not wear overgloves over the INFACO conductor glove
5
Hard-wired DSES
connection
diagram
(For right-handed users)
Protective conductor
glove
Pruning shear
F3020
L100B battery
Tab cable Pruning shear socket cable
Battery socket cable
Setting up
6
CONNECTIONS
1. Place the battery on the vest
2. Pass the cables inside the straps:
• pass the tab cable
• pass the pruning shear socket
cable
• pull out the entire cable lengths
7
3. Connect the battery socket cable
to the battery .
4. Turn the vest around and pass the
tab cable through the strap
loop.
8
CARRYING
Once the installation is complete:
• Put on the vest
• Close the front belt
• Adjust the straps for comfort
9
1. Put on
the arm-band
2. Put on the glove
3. Attach the tab to
the glove hook and
loop attachment
10
3. Wrap the elastic around the wrist passing over first, then under
4. Attach the hook and loop
CORRECT TAB LOCATION:
1. Put on the glove 2. Attach the tab
Andere Handbücher für F3020
1
Inhaltsverzeichnis
Andere infaco Sicherheitsausrüstung Handbücher
Beliebte Sicherheitsausrüstung Handbücher anderer Marken
Innova
Innova Xtirpa Bedienungsanleitung
bolle SAFETY
bolle SAFETY B810 Bedienungsanleitung
SHENZHEN FANHAI SANJIANG ELECTRONICS
SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung
Hiltron security
Hiltron security POWER8E Leitfaden
Hatco
Hatco B-950P Bedienungsanleitung
Sitec
Sitec TX MATIC Bedienungsanleitung
