Inficon E-Check Kurzanleitung
Translation of the original operating instructions
E-Check
Calibration leak for ELT3000
lime10en1-05-(2007)
lime10en1-05-(2007)
Catalog No.
600-105
From software version
--
INFICON GmbH
Bonner Strasse 498
50968 Cologne, Germany
INFICON Table of contents
E-Check_Operating-instructions-lime10en1-05-(2007) iii
Table of contents
1 General information ............................................................................................4
1.1 Warnings.....................................................................................................5
2 Safety .................................................................................................................6
2.1 Owner requirements ...................................................................................8
2.2 Duties of the operator ...............................................................................10
2.3 Intended use .............................................................................................11
3 Scope of delivery, transport, storage................................................................12
4 Description........................................................................................................15
4.1 Markings on the calibrated leak ................................................................18
4.2 Function ....................................................................................................19
4.3 Technical specifications............................................................................20
4.3.1 Mechanical data............................................................................ 20
4.3.2 Ambient conditions........................................................................ 20
5 Disposal............................................................................................................21
6 Declaration of Contamination ........................................................................... 22
1 | General information INFICON
4 / 24 E-Check_Operating-instructions-lime10en1-05-(2007)
1 General information
The E-Check (DMC), only described as a calibration leak
below, may only be used in proper condition and in the
condition described in the operating instructions and only
by trained personnel.
►Observe local regulations for the use of the calibration
leak.
INFICON General information | 1
E-Check_Operating-instructions-lime10en1-05-(2007) 5 / 24
1.1 Warnings
DANGER
Imminent hazard resulting in death or serious
injuries
WARNING
Hazardous situation resulting in potential death or
serious injuries
CAUTION
Hazardous situation resulting in minor injuries
NOTICE
Hazardous situation resulting in damage to property
or the environment
2 | Safety INFICON
6 / 24 E-Check_Operating-instructions-lime10en1-05-(2007)
2 Safety
DANGER
Risk of injury from explosion
► If liquids leak out, dispose of the calibration leak
properly.
► Do not smoke and stay away from ignition sources.
WARNING
Risk of injury from flammable solvents
The solvent in the calibration leak is highly flammable.
Overheating can damage the membrane, solvent can
leak and ignite from an ignition source.
► Observe the manufacturer's safety data sheets and
follow the applicable work instructions.
► Avoid heating the calibration leak to high
temperatures.
INFICON Safety | 2
E-Check_Operating-instructions-lime10en1-05-(2007) 7 / 24
NOTICE
Property damage from falling
Place the calibration leak safely on a flat surface and
protect it from falling.
► Remove the transport lock and store the calibration
leak for at least 24 hours before use.
► Store the calibration leak in a well-ventilated place so
that the text on the top is always legible.
2 | Safety INFICON
8 / 24 E-Check_Operating-instructions-lime10en1-05-(2007)
2.1 Owner requirements
The following notes are for companies or any person who
is responsible for the safety and effective use of the
product by the user, employees or third parties.
Safety-conscious operation
• Only operate the calibration leak if it is in a technically
perfect condition and shows no signs of damage such
as escaping solvents.
• Only operate the calibration leak as intended, in a
safety and risk conscious manner, and in accordance
with this instruction manual.
• Adhere to the following regulations and observe their
compliance:
– Intended use
– General applicable safety and accident
prevention regulations
– International, national and local standards and
guidelines
– Additional device-related provisions and
regulations
• Keep this instruction manual available on site.
INFICON Safety | 2
E-Check_Operating-instructions-lime10en1-05-(2007) 9 / 24
Personnel qualifications
• Only instructed personnel are to be permitted to work
with the calibration leak on the battery leak detector.
The instructed personnel must have received training
on calibration leaks.
• Make sure that authorized personnel have read and
understood the instruction manual and all other
applicable documents.
2 | Safety INFICON
10 / 24 E-Check_Operating-instructions-lime10en1-05-(2007)
2.2 Duties of the operator
• Read, observe, and follow the information in this
manual and in the work instructions provided by the
owner. This concerns in particular the safety and
warning instructions.
• Always observe the complete operating instructions
for all work.
Andere Handbücher für E-Check
1
Inhaltsverzeichnis
Andere Inficon Sicherheitssensor Handbücher
Inficon
Inficon WHISPER Bedienungsanleitung
Inficon
Inficon D-TEK Stratus Bedienungsanleitung
Inficon
Inficon TEK-Mate Bedienungsanleitung
Inficon
Inficon Ecotec E3000 Versionshinweis
Inficon
Inficon ELT3000 Kurzanleitung
Inficon
Inficon Contura S400 Kurzanleitung
Inficon
Inficon HLD6000 Bedienungsanleitung
Inficon
Inficon Modul1000 Bedienungsanleitung
Inficon
Inficon Modul1000 Bedienungsanleitung
Inficon
Inficon IRwin Series Bedienungsanleitung
Inficon
Inficon D-TEK Stratus 724-202-G1 Bedienungsanleitung
Inficon
Inficon UL6000 Fab Kurzanleitung
Inficon
Inficon Sensistor ISH2000 HySpeed Bedienungsanleitung
Inficon
Inficon GAS-Mate Bedienungsanleitung
Inficon
Inficon TEK-Mate Bedienungsanleitung
Inficon
Inficon ELT3000 PLUS Kurzanleitung
Inficon
Inficon IRwin Bedienungsanleitung
Inficon
Inficon Sensistor Sentrac SEN.122.164 Bedienungsanleitung
Inficon
Inficon D-TEK Stratus 724-202-G Series Bedienungsanleitung
Inficon
Inficon HLD6000 Bedienungsanleitung
