Infineon AIROC CYBLE-343072-EVAL-M2B Bedienungsanleitung

Quick start guide

AIROC™ Bluetooth® LE module evaluation kit

www.infineon.com/cyble-343072-eval-m2b/

Kit contents

1. CYW9BTM2BASE1 baseboard

2. CYBLE-343072-EVAL Bluetooth® radio card based on AIROC™ CYW20835 silicon

(connected to the baseboard using the M.2 connector)

3. USB standard-A to Micro-B cable

4. Quick start guide (this document)

CYBLE-343072-EVAL-M2B

Quick start guide

Before you start

1. Register on the Developer community and

then download and install ModusToolbox™

soware v 2.4 (or later) with the Bluetooth®

SDK at

https://www.infineon.com/modustoolbox.

2. Your kit has the ‘Hello Sensor’ application

pre-programmed. Do the following to install

the ‘HelloClient’ peer application.

a. In Eclipse IDE for ModusToolbox™

soware, select File > New application.

This launches the project creator.

b. In the project creator, click

AIROC™ Bluetooth® BSPs.

c. Select the ‘CYBLE-343072-EVAL-M2B’

kit and click Next.

d. Under template applications, select

Bluetooth® and select LE Hello Sensor.

(refer to the screenshot on the right).

e. Click Create and wait ~10 seconds for

Project Creator to close.

3. Connect a USB cable between the PC and

CYBLE-343072-EVAL-M2B (J6) to

power the kit.

Run the ‘HelloClient’ application

1. Locate the ‘HelloClient’ peer sample

application on your PC that complements

the ‘HelloSensor’ application at

…\mtw\mtb_shared\wiced_btsdk\tools\

btsdk-peer-apps-ble\release-v<Version#>\

hello_sensor\Windows\HelloClient\

Release\x64.

2. Run the HelloClient executable on your PC

and select the ‘HelloSensor’ device, which

appears as a device with the name ‘Hello’.

3. When prompted, allow pairing from

the client to the HelloSensor device.

4. In the HelloClient window, select Allow

Notifications next to the Hello Input

characteristic.

5. Press button SW3 on the evaluation kit.

Observe that the Value field shows the

Hello 1 message.

6. Press SW3 again, and then click Read.

Observe that the Value field for the Hello

Configuration characteristic is

incremented.

ModusToolbox™ soware

HelloClient application

Quick start guide

1. VDDIO current measurement

jumper (J17)

2. Peripheral enable jumper (J19)

3. VDDIO select jumper (J7)

4. Baseboard power status LED (D3)

5. VBAT select jumper (J8)

6. USB connector for programming/

USB-UART (J6)

7. VPA select jumper (J16)

8. KitProg3 based on PSoC™ 5LP

MCU (U12)

9. KitProg3 mode select (SW5)

10. KitProg3 status LED (D5)

11. Debug interface select jumper (SW8)

12. Debug header (J13)

13. Recovery button (SW1)

14. Header compatible with Arduino (J1)

15. Reset button (SW2)

16. Header compatible with Arduino (J2)

17. User button (SW3)

18. User LEDs (D1, D2)

19. User LED/DMIC switch (SW4)

20. Digital mic sound port (J16)

21. AIROC™ CYBLE-343072-02

22. Analog mic footprint (MIC1)

23. Thermistor (TH2)

24. Thermistor enable jumper (J18)

25. Header compatible with Arduino (J4)

26. Bluetooth® I/O header (J12)

27. Header compatible with Arduino (J3)

28. Bluetooth® I/O header (J11)

29. Ambient light sensor (U10)

16 17

10 18

11 12

13 14

272829

AIROC™ Bluetooth® LE module evaluation kit board details

CYBLE-343072-EVAL-M2B

Published by

Infineon Technologies AG

81726 Munich, Germany

Document Number: 002-34052 Rev. *A

Date: 08 / 2022

Please note!

This Document is for information purposes only and any

information given herein shall in no event be regarded as a

warranty, guarantee or description of any functionality,

conditions and/or quality of our products or any suitability

for a particular purpose. With regard to the technical

specifications of our products, we kindly ask you to refer

to the relevant product data sheets provided by us.

Our customers and their technical departments are

required to evaluate the suitability of our products

for the intended application.

We reserve the right to change this document and/or

the information given herein at any time.

Additional information

For further information on technologies, our products, the

application of our products, delivery terms and conditions

and/or prices, please contact your nearest Infineon Technologies

oﬀice (www.infineon.com).

Warnings

Due to technical requirements, our products may contain

dangerous substances. For information on the types in question,

please contact your nearest Infineon Technologies oﬀice.

Except as otherwise explicitly approved by us in a written

document signed by authorized representatives of Infineon

Technologies, our products may not be used in any life-

endangering applications, including but not limited to medical,

nuclear,military,life-critical or any other applications where a

failure of the product or any consequences of the use thereof

can result in personal injury.

www.infineon.com

Quick start guide

AIROC™ Bluetooth® LE module evaluation kit pinout details

GND

P27

HOST_WAKE

GND

P34

P38

GND

P07

P16

P06

P14

P09

VIO_BASE

RST

3V3

GND

P08

P10

P11

P12

P13

P05

P04

P03

P02

P28

P00

P32

P29

VBAT

GND

UART_RXD

UART_TXD

UART_CTS_N

UART_RTS_N

CYBLE-343072-EVAL-M2B

Andere Infineon Computerhardware Handbücher

Infineon

Infineon AN230264 Bedienungsanleitung

Infineon

Infineon EiceDRIVER 2EDL803 Series Bedienungsanleitung

Infineon

Infineon CY8CKIT-028-SENSE Bedienungsanleitung

Infineon

Infineon TRAVEO II Bedienungsanleitung

Infineon

Infineon EASY3452 Bedienungsanleitung

Infineon

Infineon AIROC CYW9 907 Series Bedienungsanleitung

Infineon

Infineon XMC7200 Bedienungsanleitung

Infineon

Infineon KIT T2G-B-E LITE Bedienungsanleitung

Infineon

Infineon CY7113 EZ-PD PMG1-S3 Bedienungsanleitung

Infineon

Infineon TLE4241SYS SHIELD Bedienungsanleitung

Infineon

Infineon CY8CPROTO-062S2-43439 Bedienungsanleitung

Infineon

Infineon BTS3011TE Bedienungsanleitung

Infineon

Infineon DEMO-MIPI-4K-CAM01 Bedienungsanleitung

Infineon

Infineon CY8CKIT-028-SENSE Bedienungsanleitung

Infineon

Infineon TRAVEO II CPU BOARD Bedienungsanleitung

Infineon

Infineon TRAVEO T2G Bedienungsanleitung

Infineon

Infineon EVAL-XDPP1100-Q024-DB Bedienungsanleitung

Infineon

Infineon EZ-PD PAG2S-2P Bedienungsanleitung

Infineon

Infineon 6EDL SPI LINK Bedienungsanleitung

Infineon

Infineon REF-Vacuum-C101-2ED Bedienungsanleitung

Infineon

Infineon CY8CKIT-005 Bedienungsanleitung

Infineon

Infineon Traveo II CPU board Bedienungsanleitung

Infineon

Infineon CYSBSYSKIT-DEV-01 Bedienungsanleitung

Infineon

Infineon BGT60LTR11AIP EBG Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung