Infinite Peripherals LineaPro 5 Betriebsanleitung

Choose 2Rent

Phone 1 (800) 622-6484

Fax 1 (866) 937-8254

info@choose2rent.com

www.choose2rent.com

page 1 of 4

Dual Purpose Scan Button

The Linea Pro 5 uses a single dual-purpose scan button to power on the

unit as well as scanning barcodes. When the Linea Pro 5 is left idling

for an extended period, the power is automatically turned off to

preserve the charge in the internal battery pack.

Power On

When the Linea Pro 5 is in the off mode, pressing the scan button

momentarily turns on the unit. A single beep indicates the Linea Pro 5

is now ready for use.

Pressing the scan button a second time will activate the scanner for

normal bar code scanning.

How to Use LineaPro 5 Scanner

Top Side

1. iPod/iPhone On/Off Button

2. Linea Pro 5 Scan Button and On Button

3. Scanner

4. Volume Controls

5. USB Sync/Charge Port

6. Audio Connector

Bottom Side

1. iPod/iPhone On/Off Button

2. Linea Pro 5 Scan Button and On Button

3. Scanner

4. Magnetic Stripe Reader

page 2 of 4

How to Scan

To scan a barcode, first activate the Linea Pro 5 by pressing the scan

button. Then position the scan head as close to the barcode label as

possible so that the scan line crosses both the ends of the barcode (or)

is within the width of the red illuminated box. Slowly pull back away

until the barcode has been read by the scanner as shown in the figure

below.

How to Swipe Magnetic Card Reader

First activate the Linea Pro 5 by pressing the scan button. When

placing the card into the reader, the magnetic strip must face UP as

shown in the figure below. Keep the edge of the card flat on the inner

edge of the reader to ensure that the magnetic strip passes over the

read head evenly.

page 3 of 4

How to Read RFID Cards

First activate the Linea Pro 5 by pressing the scan button. Place the

RFID tag/card over the receiver/transmitter. Keep the face of the

tag/card flat with the receiver/transmitter as close as possible.

Please Note: Depending on the type of RFID tags/cards being used, it may

be necessary for tags/cards to make direct contact with the surface where

the RFID receiver/transmitter is located for proper reading/writing.

How to Charge Linea Pro 5

1. Connect mini USB charger cable as shown.

page 4 of 4

2. Determine the charge state by viewing the status

LEDs.

LED Lighting Indications

Result from charging, active/online status, or because of low battery.

1. ALL LED is OFF

•Linea Pro 5 is in sleep or ready mode

2. One LED is FLASHING

•Lina Pro 5 is charging and syncing

3. Multiple LEDs are ON

•Linea Pro 5 is displaying battery level status.

Please call our support team if you need assistance

setting up your rental devices

1(800) 622-6484

Status LED Charge State

1LED = 25% of full charge

2LED = 50% of full charge

3LED = 75% of full charge

4LED = 100% of full charge

Andere Infinite Peripherals Barcode-Lesegerät Handbücher

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals IP-BC-BT Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals LINEA PRO 5 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals LINEA PRO 6 Betriebsanleitung

Infinite Peripherals

Infinite Peripherals Infinea X Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA X MINI Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals LINEA PRO 5 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 UHF Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Plus Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro Rugged Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea Tab 2 Series Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals PRO 4 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea mPOS Plus with FlexCase Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals LINEA PRO 6 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Plus Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea-Pro 4 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7i Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7i Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals ScanPro BlackBerry Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals LINEA PRO 5 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea SCP7520 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Plus Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung