USER MANUAL- INFINEA TAB LITE
8
Battery Charging
Before rst use, encure the battery is fully charged.
Your Innea Tab Lite is shipped with a Li-Po rechargeable battery, Lightning™ receptacle port, and charging pads. When attached, the iOS device can be
charged to a charging station or via the Lightning cable plugged into the Lightning port.
Use only the approved 5 volt, 2.1 amp DC adapters to charge the iOS device and Innea Tab Lite together. Failure to do so may result in problems charging
the unit and/or potential damage to the Innea Tab Lite and/or iOS device.
The charging current provided is based on the connected power source:
• Lightning port = 500mA
• Charging pads = 1000mA
Developing Infinea Tab Lite Apps
Software is not provided with your Innea Tab Lite. Please contact your reseller or Innite Peripherals for Third Party software solutions. Integrating the
Innea Tab Lite into your iOS application requires the use of the Innite Peripherals Universal Software Developers Kit (SDK).
The SDK incorporates an API specically for developing applications to use Innea Tab Litevv functionality.
For additional details on using the Innite Peripheral Universal SDK, please refer to the appropriate SDK documentation.
For the latest Innite Peripheral Universal SDK, please visit our developer portal at:
https://developer.ipcmobile.com
Note:
If fully discharged, the charging time is less than one hour and 30 minutes.
How to Charge Your Infinea Tab Lite
1. Gently connect the Lightning cable into the Lightning receptacle
on the side of the unit.
2. Do not force the Lightning charging cable as this may damage the
connector
SRED Encrypted MSR Information
The Innea Tab Lite requires proper maintenance to ensure long and trouble-free operation to integrate the PCI PTS 5.x SRED-certied unit into your
solution. This includes maintaining a proper battery charge to prevent the Innea Tab Lite from entering Tamper Detect mode. When the battery is depleted
or removed, the magnetic read head security feature is disabled and renders the unit unusable.
To prevent downtime, do not allow the battery to fully deplete, or remove the battery from the unit, and always place it on a charging station when not in use
for extended periods.
Note:
If the security features are disabled or the battery is fully discharged and is in Tamper Detect mode, the unit must be sent back to Innite Peripherals for
servicing.
