Infinity Primus Theater Pack Bedienungsanleitung

Owner’s Guide

PRIMUS THEATER PACK

2PRIMUSTHEATER PACK

PRIMUS THEATER PACK OWNER’SGUIDE

3Introduction

3Unpacking the System

3PlanningYour System

4Placement

4Wall-Mounting the Satellites

5Center and Satellite Speaker Connections

6Operation

6Maintenance and Service

7Specifications

Table of Contents

PRIMUSTHEATER PACK

NTRODUCTION

LANNING

OUR

YSTEM

Infinity Primus™Series

The Primus Series of loudspeakers continues Infinity’s

longstanding commitment to accurate sound reproduction.Our

proprietary Metal Matrix Diaphragm™(MMD™) drivers,precision

dividing networks and rigid,well-braced enclosures combine to

deliver uncompromised performance in any stereo or multichannel

home theater system.In addition,Primus Series speakers are

magnetically shielded for safe placement adjacent to a television.

Unpacking the System

Carefully unpack the system.If you suspect damage from transit,

report it immediately to your dealer and/or delivery service.Keep

the shipping carton and packing materials for future use.Open

the package and verify the following contents:

(1) Center

(4) Satellite Speakers

Before deciding where to best place your speakers, survey your room and

study Figures 1 and 2.

Figure 1.In this overhead view of a typical installation,satellite speakers

are used to reproduce sound for the front and surround channels.The

center channel reproduces sound and dialogue.The powered subwoofer

provides bass for effects and music.

Figure 2.This figure shows an alternative layout,which may be more

suitable for some rooms.

Couch

Left

Front

Channel

Left

Surround

Channel

Right

Surround

Channel

Right

Front

Channel

Center

Channel

Optional Infinity

Subwoofer

Couch

Left

Front

Channel

Left

Surround

Channel

Right

Surround

Channel

Right

Front

Channel

Center

Channel

Optional Infinity

Subwoofer

(16) Rubber Feet

••••••••

4PRIMUSTHEATER PACK

LACEMENT

WALL-MOUNTINGTHE SATELLITES

NOTE:The satellite speakers can be placed directly on a shelf,or

mounted on a wall using the built-in keyhole mount or optional

wall brackets.

Left and Right Front Channels

For left and right front channels,place one satellite to the left

and another to the right of the television,as shown in Figure 1.

Since the speakers are magnetically shielded,you can place

them very close to theTV without worrying about the magnetic

field distorting the picture.

Center Channel

For the center channel,place the speaker directly on top of,

or below,your television.Use a shelf if the television does not

provide a stable platform.

Surround Channels

For left and right surround channels,place one speaker on the

left and another on the right,to the side of or slightly behind the

listening area.The surround speakers should be mounted at a

height of between 4 feet and 7 feet.

Optional Subwoofer

Adding an Infinity powered subwoofer to the PrimusTheater Pack

will add the low-frequency information found in many recordings.

Infinity manufactures several powered subwoofers that will

deliver the impact and realism of today’s music and movie

soundtracks.Consult your Infinity dealer for help in determining

which subwoofer is best for you.If you already own a subwoofer,

consult the subwoofer’s manual for proper installation and

connection instructions.

The Primus satellites are designed to mount directly to a wall.

Each satellite speaker has two keyholes on the back.Each speaker

will require (2) 1-1/2,"#10 wood screws fastened to a wall stud.

If a wall stud is unavailable,install anchors appropriate for

1-1/2,"#10 screws.

NOTE:The customer is responsible for the correct selection

and use of mounting hardware (available through hardware

stores) that will ensure the proper and safe wall-mounting of

the speakers.

Step 1.

Mark the position on the wall where you would like to place the

mounting screws.

Step 2.

Fasten two 1-1/2,"#10 wood screws to the wall using the

markings placed in Step 1 as your guide.Leave an 11/16" space

between the wall and screwhead.If a wall stud is not available,

use appropriate anchors.

Step 3.

Place the speaker on the wall by aligning the keyholes on the back

of the speaker to the screwheads on the wall.Once positioned

properly,the speaker should slide down slightly and become

secure.

Each Primus satellite also allows for the use of third-party wall

brackets using the 1/4"-20 threaded insert located beneath the

keyhole mount.Consult the wall-bracket manufacturer for selection

of proper bracket.ker on the wall by aligning the keyhole on the

back of the speaker to the screwhead on the wall.Once positioned

properly,the speaker should slide down slightly and become

secure.

– +

Figure 3.

1/4"-20

Threaded

Insert

(remove cover)

Keyhole mounts

PRIMUSTHEATER PACK

ENTER AND

ATELLITE

PEAKER

ONNECTIONS

Turn OffAll Power

After placing the speakers,you are ready to connect your

system.First,turn off all audio-system power.Use high-quality

speaker wire to make your connections.Use at least #16-gauge

speaker wire with polarity coding.The side of the wire with

a ridge or other coding is usually considered positive polarity

(i.e.,+). Also,consult the owner’s manuals that were included

with your amplifier or receiver to confirm connection

procedures.

Satellites

Observe polarities when making speaker connections,as shown

in Figure 4.Connect each + terminal on the back of the

amplifier or receiver to the respective + (red) terminal on each

speaker.Connect the – (black) terminals in the same way.

Important!

Do not reverse polarities (i.e.,+ to – or – to +) when making

connections.Doing so will cause poor imaging and diminished

bass response.Be certain that positive and negative wire

strands are completely isolated to avoid short circuits that may

damage your equipment.

Center Channel

Observe polarities when making speaker connections,as shown

in Figure 5.Connect each + terminal on the back of the

amplifier or receiver to the respective + (red) terminal on the

speaker.Connect the – (black) terminals in the same way.

Important!

Do not reverse polarities (i.e.,+ to – or – to +) when making

connections.Be certain that positive and negative wire strands

are completely isolated to avoid short circuits that may damage

your equipment.

Figure 5.The satellites and center channel speaker feature

terminals that can be connected in several different ways:

e.g.,banana plugs,spade terminals and direct wiring

(as shown here).

– +

Figure 4. Wiring diagram shows polarity connections

for one channel of a home theater system.

6PRIMUSTHEATER PACK

PERATION

Surround Modes

When using the system in a Dolby* Digital or DTS®home theater

system,make sure all speakers are set to“Small”.

Some Dolby Digital-equipped receivers/processors offer different

setup options for each source or surround mode;e.g.,CD-stereo,

videotape,Dolby Pro Logic.* In each case,follow your equip-

ment’s instructions to ensure that the subwoofer output is turned

on (if you are using a subwoofer) and that the speakers are set

to“Small”in each mode.

When using the PrimusTheater Pack in a Dolby Pro Logic home

theater system,make sure the receiver’s center channel mode is

set to“Normal.”

The satellite and subwoofer enclosures may be cleaned using a

soft cloth to remove fingerprints or to wipe off dust.

The grilles may be gently vacuumed.Stains may be removed with

an aerosol cleaner,following its instructions.Do not use any

solvents on the grille.

All wiring connections should be inspected and cleaned or

remade periodically.The frequency of maintenance depends on

the metals involved in the connections,atmospheric conditions,

and other factors,but once per year is the minimum.

If a problem occurs,make sure that all connections are properly

made and clean.If a problem exists in one loudspeaker,reverse

the connection wires to the left and right system.If the problem

remains in the same speaker,then the fault is with the loud-

speaker.If the problem appears in the opposite speaker,the

cause is in another component or cable.In the event that

your subwoofer ever needs service,contact your local

Infinity dealer or Infinity directly at 1.800.553.3332 or

www.infinitysystems.com for a service center near you.

AINTENANCE AND

ERVICE

PRIMUSTHEATER PACK

PrimusTheater Pack

Satellites Center Channel

Frequency Range: 100Hz – 20,000Hz (±3dB) 100Hz – 20,000Hz (±3dB)

Recommended

Amplifier Power Range: 15 – 100 watts 15 – 100 watts

Sensitivity: 86dB 87dB

(2.83V @ 1 meter)

Nominal Impedance: 8Ω8Ω

Crossover Frequency: 3000Hz,24dB/Octave 3000Hz,24dB/Octave

Midrange Driver(s): 4" (100mm) MMD,™ Dual 4" (100mm) MMD,™

magnetically shielded magnetically shielded

High-Frequency Driver: 3/4" (19mm) MMD, 3/4" (19mm) MMD,

magnetically shielded magnetically shielded

Dimensions (H xW x D): 9-5/8" x 5-15/16" x 6-13/16" 5-5/16" x 14-1/4" x 6-13/16"

(245mm x 150mm x 173mm) (150mm x 363mm x 173mm)

Weight: 7 lb (3.2kg) 10 lb (4.5kg)

Infinity continually strives to update and improve existing products,as well as create new ones.The specifications and construction details in this

and related Infinity publications are therefore subject to change without notice.

PECIFICATIONS

Declaration of Conformity

We, Harman Consumer International

2, route de Tours

72500 Chateau-du-Loir

France

declare in own responsibility that the products described in this

owner’s manual are in compliance with technical standards:

EN 50081-1:1992

EN 50082-1:1997

Robin Marshall

Harman Consumer International

Chateau-du-Loir, France 3/03

*Trademarks of Dolby Laboratories.DTS is a registered trademark of DigitalTheater Systems,Inc.Infinity is a registered trademark,and MMD is a trademark,of Harman International Industries,Incorporated.

Part No.406-000-00893 3/03

Inhaltsverzeichnis

Andere Infinity Sprecher Handbücher

Infinity

Infinity Primus P143 Bedienungsanleitung

Infinity

Infinity OVTR 1 Bedienungsanleitung

Infinity

Infinity Alpha Series Bedienungsanleitung

Infinity

Infinity Compositions Overture OVTR 2 Bedienungsanleitung

Infinity

Infinity Total Solutions TSS-Center1100 Bedienungsanleitung

Infinity

Infinity OVTR 1 Bedienungsanleitung

Infinity

Infinity Compositions Series Bedienungsanleitung

Infinity

Infinity Outrigger Bedienungsanleitung

Infinity

Infinity Total Solutions TSS-800 Bedienungsanleitung

Infinity

Infinity Reference 2000.6 Bedienungsanleitung

Infinity

Infinity 1031t Service-Handbuch

Infinity

Infinity 602M Bedienungsanleitung

Infinity

Infinity Crescendo Series Bedienungsanleitung

Infinity

Infinity IRS Sigma Bedienungsanleitung

Infinity

Infinity INTERMEZZO 1.2s Bedienungsanleitung

Infinity

Infinity Compositions Overture OVTR 3 Bedienungsanleitung

Infinity

Infinity Sigma Bedienungsanleitung

Infinity

Infinity MS-1 Bedienungsanleitung

Infinity

Infinity MS-1 Bedienungsanleitung

Infinity

Infinity 6432cfp Service-Handbuch

Infinity

Infinity Outrigger Jr Bedienungsanleitung

Infinity

Infinity 10.3t Bedienungsanleitung

Infinity

Infinity ERS 110 Bedienungsanleitung

Infinity

Infinity Interlude IL25c Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung