Infinova V5822IR-A3 SERIES Bedienungsanleitung

V5822IR-A3 SERIES

VANDAL RESISTANT IR FIXED

MINIDOME CAMERA

User Manual

CONTENTS

CHAPTER I DESCRIPTION ..........................................................................1

CHAPTER II MAIN FEATURES ...................................................................2

CHAPTER III INSTALLATION.....................................................................3

3.1 SURFACE MOUNTING ......................................................................... 3

3.2 WA L L MOUNTING (WITH 86 BOX).................................................... 6

3.3 HANDLING PRECAUTIONS................................................................ 8

3.4 INSTALLATION PRECAUTIONS......................................................... 8

CHAPTER IV CAMERA FUNCTION SETTING........................................9

APPENDIX I SPECIFICATIONS.................................................................12

APPENDIX II CABLE DIAMETER CALCULATION AND

LIGHTNING & SURGE PROTECTION.....................................................14

CHAPTER I DESCRIPTION

Thank you very much for purchasing our product.

Infinova’s V5822IR-A3 series high resolution IR minidome cameras feature a

high sensitivity 1/3" SONY Super HAD II CCD sensor. Advanced Digital

Signal Processing (DSP) provides 520 TV lines of resolution and authentic

images. The built-in IR illuminators with 25 meters of radiant distance provide

super imaging performance at nighttime. These cameras are the perfection

solution for a 24x7 around-the-clock surveillance.

V5822IR-A3 series IR minidome cameras employ vandal resistant minidome

housing, making them the ideal choice for the hazardous surveillance

environments. The cameras provide easy installation, designed for surface

mount with 3-axis adjustment.

This manual is for the following models:

V5822IR-A3014SE IR minidome camera, 1/3 inch CCD,

Vandal-resistant, 3-axis, Day/night,

520TVL, PAL, 12VDC/24VAC,

Surface mount, 3.3-12mm vari-focal lens

V5822IR-A3004SE IR minidome camera, 1/3 inch CCD,

Vandal-resistant, 3-axis, Day/night,

520TVL, NTSC, 12VDC/24VAC,

Surface mount, 3.3-12mm vari-focal lens

CHAPTER II MAIN FEATURES

y1/3" SONY high resolution Super HAD II CCD sensor

yResolution: 520 TVL

yIR-Cut Removable (ICR) Filter for Day/Night switching

yBuilt-in IR illuminators, 850nm wavelength, 25 meters radiant distance

yAdjustable power consumption of IR illuminators

ySuper imaging performance at nighttime

yAuto Electronic Shutter (AES), Auto Gain Control (AGC), Backlight

Compensation (BLC)

yAspherical, auto-iris, vari-focal lens with IR correction

yLEVEL adjustment

ySurface Mount, 3-axis adjustment

CHAPTER III INSTALLATION

3.1 Surface Mounting

Step 1: Prepare mounting holes

If the minidome camera’s pigtail is dragged out from the top of upper housing,

drill mounting holes at the desired position. See the figure below for the size

and location of mounting holes.

Ø92.0

Ø30.0

Ø5.5

135°

30.0

Mounting hole

Cable hole

(Unit: mm)

Figure 3-1

Step 2: Install upper housing

Loosen the three mum-head screws in bubble flange and take off the bubble.

For ease of installation, upper housing and dome bubble are connected with a

safety lanyard. Pay attention to prevent dust, scrapings and the like from falling

into the bubble.

There are DIP switch, Blemish correction button and three mounting holes in

the upper housing. Refer to Chapter IV for detailed operation instruction.

Install the upper housing to the desired position with three M4*25 conical

tapping screws and then connect the properly arranged cables with external

power source and relevant devices.

Figure 3-2

Step 3:Adjust viewing angle

Check whether the cables are properly and firmly connected before powering

on. The dome camera will perform a self-test for about 30 seconds after

power-on. Then loosen the locking screw to adjust the camera angle according

to your surveillance need. The camera features X, Y, Z 3-axis adjustment. It

allows 0°~350° panning adjustment, 0°~75° tilting adjustment and -85°~85°

rotating adjustment.

Figure 3-3

Step 4: Set camera function

You can use the DIP switch in the upper housing to set the desired video

quality on site. The detailed instructions are specified in Chapter IV.

Step 5: Install dome bubble

Install the bubble flange to upper housing. In this process, the shielding cover

may block the camera. Thus, before securing the bubble, user should adjust the

shielding cover to a proper position. Then, fasten the screws.

With all the procedures finished, user should further confirm whether each part

of the device is properly and firmly connected.

Figure 3-4

Dimensions (Unit: mm)

Figure 3-5

3.2 Wall Mounting (with 86 box)

Step 1: Install the adapter

Fix the adapter to an 86 box with two M3.5 countersunk head screws.

Figure 3-6

Step 2: Install upper housing

Arrange the cables properly.

Loosen the three mum-head screws in bubble flange and take off the bubble.

For ease of installation, upper housing and dome bubble are connected with a

safety lanyard.

Secure the camera assembly to the adapter with three M3 conical screws. Pay

attention to prevent dust, scrapings and the like from falling into the bubble.

Figure 3-7

Step 3:Adjust viewing angle

Check whether the cables are properly and firmly connected before powering

on. The dome camera will perform a self-test for about 30 seconds after

power-on. Then loosen the locking screw to adjust the camera angle according

to your surveillance need. The camera features X, Y, Z 3-axis adjustment. It

allows 0°~350° panning adjustment, 0°~75° tilting adjustment and -85°~85°

rotating adjustment.

Step 4: Set camera function

You can use the DIP switch in the upper housing to set the desired video

quality on site. The detailed instructions are specified in Chapter IV.

Step 5: Install dome bubble

Install the bubble flange to upper housing. In this process, the shielding cover

may block the camera. Thus, before securing the bubble, user should adjust the

shielding cover to a proper position. Then, fasten the screws.

With all the procedures finished, user should further confirm whether each part

of the device is properly and firmly connected.

Figure 3-8

3.3 Handling Precautions

1. Never let any water or liquid flow into this equipment.

2. Please do not directly touch the CCD element. If it is necessary to clean the

dome bubble, use a soft cloth moistened with alcohol to wipe off any dust.

3. If any abnormality occurs, make sure to unplug the unit and contact

Infinova or your local dealer.

4. This camera possesses AGC circuit. Therefore, when the camera is used

under lower luminance, the sensibility will strengthen automatically and

make the image very rough in vision. It is normal.

5. If the subject is with high luminance (like lamp), vertical stripes will occur

on the monitor (tailing shadow) or the surrounding image becomes vague

(flowering). It is special phenomenon of CCD, not error.

6. The power for this camera is 12VDC or 24VAC. The power 24VAC should

be isolated power only.

3.4 Installation Precautions

1. Do not drop the camera or subject it to strong knock.

2. Do not point the camera lens toward the sun or other strong light.

3. Do not install the camera in the places where the temperatures rise above or

fall below the acceptable range (from -10°C to 50°C), or high humidity

and/or direct rainfall, frequent vibrations, or shocks occur.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Infinova Sicherheitskamera Handbücher

Infinova

Infinova V6202IR-TA Series Bedienungsanleitung

Infinova

Infinova V1771N series Bedienungsanleitung

Infinova

Infinova V6822-T0 Series Bedienungsanleitung

Infinova

Infinova V5812IR-A8 Series Bedienungsanleitung

Infinova

Infinova V6822-T0 Series Bedienungsanleitung

Infinova

Infinova V6822-T Series Bedienungsanleitung

Infinova

Infinova V5412-A7004SB Bedienungsanleitung

Infinova

Infinova V1242-36A Bedienungsanleitung

Infinova

Infinova V5411-A8004ST Bedienungsanleitung

Infinova

Infinova V5121-A7 Series Bedienungsanleitung

Infinova

Infinova V6822IR-TA Series Bedienungsanleitung

Infinova

Infinova V1492MR-20TH Betriebsanleitung

Infinova

Infinova V5821-A7 Seires Bedienungsanleitung

Infinova

Infinova V1700N series Bedienungsanleitung

Infinova

Infinova V1700N-NE2 Series Bedienungsanleitung

Infinova

Infinova V6822-TA Series Bedienungsanleitung

Infinova

Infinova V6202IR-H0125A Bedienungsanleitung

Infinova

Infinova V1492 Series Betriebsanleitung

Infinova

Infinova V6812IR-H0065SA Bedienungsanleitung

Infinova

Infinova V6822-TA Series Bedienungsanleitung

Infinova

Infinova V1772N-18T0H Bedienungsanleitung

Infinova

Infinova V5410-A2 SERIES Bedienungsanleitung

Infinova

Infinova V5411-A2 SERIES Bedienungsanleitung

Infinova

Infinova V1723 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung