InfiRay Cabin Series Bedienungsanleitung

Cabin Series

Operating Manual

V1.0

InfiRay Technologies Co., Ltd.

Specifications

Model

CAD25

Detector Specifications

Type

CMOS

Resolution

1440×1080

Pixel size, μm

Frame Rate, Hz

Optical Specifications

Objective Lens, mm

22/25

FOV

13.1º×9.9º

Visual Magnification, ×

2-8

Digital Zoom, ×

1-4

Eye Relief, mm

Focusing range of eyepiece, D

-5～+5

Detection Range, m

(Target size: 1.7m×0.5m, P(n)=99%)

200

Display Specifications

Type

LCOS

Resolution

1280×960

Battery Power Supply

Battery type/Capacity/Output voltage

Lithium-ion battery pack IBP-2/3.1Ah /3.6V

Operating time (22 ºC), h*

External Power Supply

5V (Type C)

Physical Specifications

Ingress Protection Rating

IP66

Memory Capacity, GB

APP

Supported

Operating Temperature, °C

-20~+50

Weight (exclusive of battery pack), g

<380

Dimension, mm

165×50×85

*Actual operation time depends on the density of Wi-Fi use and video recording functions;

Improvements may be made to the design and software of this product to enhance its features

without prior notice;

You can download this Manual at our official website: www.infirayoutdoor.com.

I. Package Contents

Cabin series digital night vision device

Wrist strap

Strap

Portable bag

IBC-2 power adapter

IBP-2 battery pack

Type-C USB cable

Power adapter

Lens cleaning cloth

Adapter clamp

II. Description:

The Cabin series digital night vision device is a multi-function night vision device for outdoor

use. It is both a handhold device for independent usage and a night vision rear attachment. The

Cabin series is lightweight, compact and easy to carry, and can be operated with one hand. The

battery can be quickly removed. Its well-designed features bring you good user experience. With a

built-in fill-in light, it can be widelyapplied to hunting, searching, and locating underextremelylow

illuminations.

III. Product Features

Starlight low illuminance CMOS;

High image quality;

Lightweight and compact;

Large HD display

Quickly removable battery pack;

Zooming fill-in light;

Stadiametric rangefinding;

Long detection distance;

Built-in memory card, supporting photo

taking and video recording

Built-in Wi-Fi module, supporting app

connection

Built-in digital magnetic compass and

motion sensor;

PIP (picture-in-picture) function; Convenient operation interface

IV. Device Composition

1. Lens cap

2. Laser pointer

3. Fill-in Light

4. Type-C interface

5. Power button

6. Up button (zoom button)

7. M button (menu button)

8. Down button (camera button)

9. Eye cup

10. Eyepiece focusing ring

11. Power indicator

12. Objective lens focus knob

13. Battery pack

V. Button Operations

Button

Device

Status/Current

Operation

Mode

Press

Press and Hold

Power button

Powered off

——

Power on the device

Home screen

Standby

Shut down the device

Standby

Wake up the device

——

Main menu

interface/Shortcut

menu interface

Exit the main menu/Return

to the upper menu

——

M button

(Menu button)

Home screen

Open the shortcut menu

Open/Exit the main

Shortcut Menu

Adjust specific parameters

of a function

Exit the shortcut menu

Main menu

interface

Adjust specific parameters

of a function/Go to the next

level

Save and go back to

the home screen

Reticle position

adjustment screen

Enable/disable the cursor

movement function

Save and exit

Up button

(Zoom button)

Home screen

Visual amplification

adjustment: 2×-8×

Turn PIP on/off

Shortcut

menu/main menu

Navigate upwards with the

——

Laser cursor

calibration

Move cursor left

Quickly move cursor

left

Down button

(Camera

button)

Home screen

Photographing

Start/Stop video

recording

Video Recording

Photographing

Stop recording and

save the video

Shortcut

menu/main menu

Navigate downwards with

the menu

——

Reticle position

adjustment screen

Move cursor right

Quickly move cursor

right

Up button + M

button

Home screen

Turn the laser on/off

Turn on/off the

stadiametric

rangefinder

Down button +

M button

Home screen

Turn on/off or adjust the

infrared lamp

——

VI. Battery Charging

The Cabin series is supplied with a quickly removable 18650 Li-ion battery pack, which

enables the device to be used for up to 8 hours. The battery should be fully charged before first use.

Method 1: Type C Charging

Align the orange vertical line on the

battery pack with that next to the battery

holder of the Cabin night vision device,

and install the batterypack into the battery

holder. For details see Battery Pack

Installation;

Connect the Type-C interface (18) of the cable to the Type-C interface (4) of the device;

Connect the other interface to the power adapter (19) of the device, or a USB power

socket with a rated voltage of 5V or lower;

Insert the adapter to a 100-240V power socket (20) for charging.

Method 2: Charging with the Battery Holder

Align the position block (A) of the battery pack with the groove (B) of the battery

charging holder, and insert the battery pack (13) into the battery holder (15);

Connect the Type-C interface of the cable (18) to the Type-C interface (16) of the device;

Connect the other end of the data cable to the

power adapter (19), and insert the adapter

into a 100-240V power socket (20) to charge

the battery pack;

After the above steps are finished, the LED

indicator (17) on the battery holder will light

up or blink:

- ◐Battery charging capacity 1%-25%

- ●◐Battery charging capacity 25%-50%

- ●●◐Battery charging capacity 50%-75%

- ●●●◐Battery charging capacity 75%-99%

- ●●●● Fully charged

After the battery is fully charged, remove the battery pack from the battery holder.

Note: This battery holder can charge two IBP-2 battery packs at the same time.

Battery Pack Installation

Turn up the pick (14) on the battery

pack, align the orange line (D) on the

battery pack with the orange line (C)

above the battery holder, and push the

battery pack (13) into the battery

holder (21);

When the battery pack is fully inserted into the battery holder, rotate the pick (14)

clockwise to lock the battery pack;

Close the pick (14) to complete the battery pack installation;

The Cabin series can only be powered by this battery pack. If other batteries are used, it

may cause irreparable loss, damage the device, and even may cause fire.

Safety Measures

Use this battery holder to charge the battery pack only. Otherwise it will cause irreparable

damage to the battery pack or holder and even may cause fire.

After a long storage time, the battery pack should be partially charged, not fully charged

or discharged;

Do not charge the device immediately after it is moved to a warm environment from a

cold environment. Wait for 30 to 40 minutes for preheating.

If the charger is modified or damaged, do not use it;

The device should be charged at a temperature of 0°C to +45°C. Otherwise, the battery

life will be significantly reduced.

When charging, please do not leave the battery unattended;

Do not expose the battery to high temperature or open flame;

Do not immerse the battery in water;

The battery pack is equipped with a short circuit protection function, but situations that

may lead to short circuits should be avoided;

Do not connect the battery to the power supply for more than 24 hours after it is already

fully charged;

It is not recommended to connect third-party devices that consume more energy than the

allowed value.

Please do not disassemble or modify the battery pack without professional instructions;

Do not knock or drop the battery pack;

The recommended operating temperature for the device is -20°C to +50°C. Do not use the

device beyond this temperature range, or else, it may shorten the battery life.

When the device is used under sub-zero temperature, the battery capacity drops. This is

normal and does not indicate a defect.

Please keep the battery pack out of the reach of children.

VII. External Power Supply

The Cabin series supports external power supplies, such as the portable power source (5V).

Connect the external power supply to the Type-C interface (4) of the device;

The device will automatically switch to the external power supply and charge the internal

battery pack at the same time;

Then, the battery icon on the display will change to the charging icon , and the

power indicator turns red. When the battery pack is fully charged, the indicator turns

green;

If the device is connected to an external power source and no battery pack is installed, the

battery icon will be changed to the USB icon , and the power indicator is green;

When the external power supply is disconnected, the Cabin series device will

automatically switch to the battery pack and will not shut down.

VIII. Installation and Usage

Operation

WARNING! The lens must not be pointed at any sources of intense radiation energy,

such as laser-emitting devices or the sun. This may damage the electronic components in the

device. Damage caused by failure to comply with the operating guidelines is not covered

under warranty.

Remove the lens cap (1). Press and hold the power button (5) for 2s to power on the

device. Then, the home screen appears after 3s.

Rotate the eyepiece focusing ring (10) of the objective lens until the image becomes clear

in the eyepiece.After the adjustment, it no longer needs to be adjusted for the same user;

Rotate the objective lens focus knob (12) to adjust the focal length, to focus on the object

to be observed;

Setting the image mode: Press the M button (7) to enter the shortcut menu and set the

image palette mode. The options are the

day mode and night mode. The icon on

the lower-left status bar is updated in

real-time;

Configure the digital zoom, image

mode, display brightness, image

contrast, image sharpness, and so on

(for details, see Shortcut Menu Functions in this manual);

After using the device, press and hold the Power button (5). Then, the shutdown

countdown screen appears. When the countdown counts from 3 to 0, the device shuts

down. Then, you can release the Power button. The current status will be automatically

saved after shutdown. When the device is powering off and saving data, do not

disconnect it from the power source. Otherwise, the data cannot be saved.

Before the countdown ends, you can release the button to return to the home screen.

IX. Digital Zoom

The Cabin series supports 1-4 times magnification of images to increase visual magnification.

On the home screen, press the Up button (6) in a circular manner to circularly zoom the

image;

The corresponding visual magnification is displayed on the status bar on the top;

The visual amplification corresponding to 1-4 times magnification of the CAD22

（CAD25）series is 2×, 4×, 6×, and 8×;

XI. Photo Taking and Video Recording

The Cabin series is equipped with a built-in 16 GB memory card, which allows photo taking

and video recording. The image and video files recorded will be named after time and stored in the

memory, so it is recommended to set the system date and time in the main menu ("Main Menu -

Settings - Date"), or synchronize the system date and time in the settings page of the app before

photo taking and video recording. For specific steps, see the operating instructions for the app that

can be downloaded from our official website.

Photographing

On the home screen, press the Down button (8) to take a photo. The image freezes for

0.5s and a photographing icon flashes on the upper left corner. After the image is taken,

the icon disappears;

The images taken are saved in the built-in memory space.

Video Recording

On the home screen, press and hold the Down button (8) to start the video recording;

A recording icon and a prompt box showing the recording time will appear in the upper

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere InfiRay Wärmebildkamera Handbücher

InfiRay

InfiRay Xmini Bedienungsanleitung

InfiRay

InfiRay AT1280 Bedienungsanleitung

InfiRay

InfiRay P2 Pro Bedienungsanleitung

InfiRay

InfiRay Tianshu C Series Bedienungsanleitung

InfiRay

InfiRay P Series Bedienungsanleitung

InfiRay

InfiRay AT31F Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

InfiRay

InfiRay Geni Series Bedienungsanleitung

InfiRay

InfiRay Clip CH50 V2 Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

InfiRay

InfiRay Night Vision Go Bedienungsanleitung

InfiRay

InfiRay T Series Bedienungsanleitung

InfiRay

InfiRay XTHERM II Bedienungsanleitung

InfiRay

InfiRay Tube Series Bedienungsanleitung

InfiRay

InfiRay S Series Bedienungsanleitung

InfiRay

InfiRay AT31F Bedienungsanleitung

InfiRay

InfiRay M200 Series Bedienungsanleitung

InfiRay

InfiRay AT1280H Series Bedienungsanleitung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay AT20 Bedienungsanleitung

InfiRay

InfiRay ITSII 300 Gebrauchsanweisung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay iRay RH25 Bedienungsanleitung

InfiRay

InfiRay AT20 Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR M-Series Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

FLIR

FLIR X6530sc Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung

Major tech

Major tech MTi11 Bedienungsanleitung

COHU

COHU 5935-1000/T100 Bedienungsanleitung

FLIR

FLIR T4xx series Bedienungsanleitung