InfiRay Tube Series Bedienungsanleitung

Tube Series

Operating Manual

V1.0

InfiRay Technologies Co., Ltd.

Specifications

Model

TD50L

Resolution, pixels

1440×1080

Frame Rate, Hz

Objective Lens, mm

50 (F1.2)

Field of View, º

6.6×4.9

Magnification, ×

4.0~16.0

Smooth zoom

Support

Eye Relief, mm

Diopter Adjustment, D

-4~+4

Type

LCOS

Resolution, pixels

1280×960

Video record resolution, pixels

1440×1080

Capture resolution, pixels

1440×1080

Detection range, m

600

Battery

Built-in 6600mAh and a replaceable

1500mAh

Max. Operating Time (at temp.=22ºC), h*

>13

External power supply

5V (Type C USB)

Diameter of the riflescope body to assemble the

mounting rings, mm

Max. Recoil Power on Rifled Weapon, g/s²

1000

Degree of protection, IP code

IP67

Amount of built-in memory, GB

Weight (without replaceable battery), g

<1000

Dimension, mm

395×85×75

APP

Support

Smart range finder

Support

IR illuminator,nm

850/940

Max Power of IR illuminator , w

2.2

*Actual operation time depends on the density of Wi-Fi use and video recording functions;

*The product package does not contain the IR illuminator. Please select 850nm/940nm IR

illuminator according to your own needs.

Improvements may be made to the design and software of this product to enhance its features

without prior notice to the customer;

You can download this Manual at our official website: www.xinfrared.com.

I. Package Contents

TD50L digital night vision scope

Eye cup

IPB-3 portable bag

USB-C cable

Power adapter

Lens cleaning cloth

Certificate of qualification

II. Description:

Tube series digital night vision device is a daytime and night dual-use scope designed for

outdoor hunting. It is equipped with a starlight-level low illuminance chip, which can restore true

colors and details in both day and night.The Tube series has a variety of battery-powered

solutions with long operating hours, and can be widely used for hunting, observation and

positioning in low visibility conditions. It adopts a30mm standard pipe diameter to meet the

requirements of the general clamp interface.

III. Product Features

Starlight low illuminance sensor;

High image quality;

Infinite zoom;

Dual power supply system, with long battery life;

Standard 30mm pipe diameter;

Stadiametric rangefinding;

Long detection distance;

Built-in memory card, supporting photo taking and video recording

Built-in Wi-Fi module, supporting app connection

Support PIP (picture-in-picture) function (Due to some factors, this function is not available

for some regions);

Convenient operation interface;

IV. Device Composition

1. Eye cup

2. Eyepiece focusing ring

3. Camera button

4. Display brightness

button

5. Power button

6. Image mode button

7. Rotary encoder

8. USB cap

9. Type-C interface

10. LED indicator

11. Battery holder cover

12. 18500 battery

13. Focusing ring of the objective lens

14. Lens cap

V. Button Operations

Button

Device

Status/Current

Operation Mode

Press

Press and Hold

Rotate

Power

Button

Powered off

——

Power on the

device

——

Home screen

Standby

Shut down the

device

——

Standby

Wake up the

——

device

Advanced menu

screen

Return to the

upper menu

without saving

changes

——

Image

Mode

Button

Home screen

Switch the image

mode

Turn on/off the PIP

function

——

Display

Brightness

Button

Home screen

Adjust the

display

brightness

Turn on/off the

stadiametric

rangefinding

function

——

Camera

Button

Home screen

Take a photo

Turn recording

on/off

——

Rotary

Encoder

Home screen

Open the

shortcut menu

Open the advanced

Adjust image

magnification

Shortcut menu

screen

Adjust specific

parameters of a

function

Save and go back

to the home screen

Switch between

options/move

reticle position:

Clockwise:

move to the

left/down

direction;

Anticlockwise:

move to the

right/up

direction

Advanced menu

screen

Confirm the

option

parameters/Open

the submenu

Save and go back

to the main menu

Zeroing screen

Switch between

the X axis/Y axis

Save and go back

to the main menu

VI. Battery Charging

The Tube series adopts a dual power supply

system (built-in chargeable Lithium-ion battery

pack and a replaceable 18500 battery). The

normal working time of the dual power supply

system can be up to 13 hours. The battery

should be fully charged before first use.

Charging the Built-in Battery

Package

Turn counterclockwise to open the

USB cap;

Insert the Type-C end of the attached data cable into the Type-C socket on the Tube;

Connect the other end of the data cable to the power adapter, and insert the adapter into a

100-240V power socket to charge the battery pack;

When charging, a lightning charging icon appears on the battery icon,

and the LED indicator on the device is in red. When the indicator turns green, it

indicates that the charging is completed.

During use, if the battery icon turns to , it indicates that the battery level is low.

Please charge the battery in time to avoid reducing the service life of the device due to

over discharge of the battery.

Note: The USB port can only be used for charging the built-in battery pack.

Installing 18500 battery

Turn anticlockwise to open the battery

holder cover (11);

Install the 18500 battery (12) according to

the indication label in the battery holder,

that is, the positive pole faces inward and the negative pole faces outward;

Close the battery holder cover (11) and turn clockwise to tighten it.

Safety Measures

When charging, please use the 5V2A power adapter compatible with the device. Using

any other type of adapter may cause irreversible damage to the battery or the adapter

itself;

If the device is not in use for a long time, the battery should be partially charged, not fully

charged or discharged.

Do not charge the device immediately after it is moved to a warm environment from a

cold environment. Wait for 30 to 40 minutes for preheating.

If the charger is modified or damaged, do not use it;

The device should be charged at a temperature of 0°C to +40°C. Otherwise, the battery

life will be significantly reduced.

When charging, please do not leave the battery unattended;

Do not connect the battery to the power supply for more than 24 hours after it is already

fully charged;

It is not recommended to connect third-party devices that consume more energy than the

allowed value.

The device is equipped with a short circuit protection system, but conditions that may

lead to a short circuit should be avoided.

The recommended operating temperature for the device is -20°C to +50°C. Do not use the

device beyond this temperature range, or else, it may shorten the battery life.

When the device is used under sub-zero temperature, the battery capacity drops. This is

normal and does not indicate a defect.

Switching between two types of batteries

The Tube series supports the dual power supply system: built-in Lithium-ion battery pack and

replaceable 18500 battery, while supporting a USB power supply.

If both batteries are installed in the Tube device, two battery icons are displayed on the

right of the status bar above the image, with the replaceable battery before the built-in

battery. Green indicates that the device is being powered, and gray indicates that the

device is not powered on.

If the replaceable battery is not installed, only a green built-in battery icon is displayed on

the status bar.

If the replaceable battery is installed and fully charged, it will be preferred. When the

replaceable battery is low, the device will switch to the built-in battery automatically.

When the device is connected to a USB, it will switch to the external power supply USB

automatically. At this time, a lightning-like charging icon is displayed on the built-in

battery icon, which indicates that the built-in battery is being charged.

When the device is in use, the replaceable battery can also be replaced. At this time, it

will switch to the internal battery automatically.

VII. External Power Supply

The Tube series supports external power supplies, such as the portable power source for a

mobile phone (5V).

Connect an external power supply to the USB port (9) of the Tube device;

Then, the device automatically switches to the external power supply and charge the

internal battery pack at the same time;

When the external power supply is turned off, the device switches to the replaceable

18500 battery for power supply. If no replaceable 18500 battery is installed or the battery

level is low, it will switch to the built-in battery pack, instead of shutdown.

VIII. Installation and Use

Fixed installation

WARNING! The lens of the device must not be pointed at any sources of intense

radiation energy, such as laser-emitting devices or the sun. This may damage the electronic

components in the device. Damage caused by failure to comply with the operating guidelines

is not covered under warranty.

To ensure firing accuracy, please fix the Tube at a proper position on the weapon.

The Tube series needs to be fixed with an adapter clamp, such as a simple Picatinny rail

clamp provided in the package. The Tube series adopts a tubular body design with a

diameter of 30mm, which is compatible with standard clamps with a diameter of 30mm,

such as those of day scope. Proper tools can be used to install the Tube device according

to the supplier's installation suggestions and steps.

During installation, the installation position of the Tube device should be adjusted

according to the distance between eye and eyepiece (eye relief) as specified in the

specifications and the sense of use and comfort. If you fail to follow this suggestion, the

eyepiece may hurt the shooter during the shooting.

It is recommended to install the scope as low as possible, but keep it away from the barrel

or other devices;

It is recommended to use a torque wrench to tighten the screws of the installation clamps,

so as to avoid damaging the scope body due to being over-tightened, and the

recommended torque shall not exceed 2.5nm;

When the scope is used for hunting, please carry out the zeroing operation first

according to the instructions as specified in "Chapter 9 "Zeroing" in this manual;

When using the scope at night or in a dark environment, it is recommended to use an eye

cup to avoid being found.

Startup and Configuration

Opening the lens cap (14). If the outdoor light is strong, you can close the lens cap to

prevent the image from overexposure;

Press and hold the Power button (5) for 2s to power on the device. Then, the home screen

appears after 3s.

Adjust the resolution of the icon on the display by rotating the eyepiece focusing ring (2)

of the ocular lens;

Adjust the focus length by rotating the focusing ring (13) of the objective lens;

Setting the image mode: On the home screen, press the P button (6) to set the image

palette mode, which is day-night in sequence, and the icon on the top status bar is updated

in real-time;

Setting the display brightness: On the home screen, press the display brightness button (4)

to set the screen brightness, which can be switched between level 1 to level 5, and

meanwhile, a short prompt for the corresponding brightness icon appears at the bottom of

the display;

Setting the image sharpness: Press the rotary encoder (7) to go to the shortcut menu, and

set the image sharpness (refer to Chapter "Shortcut Menu for details);

After using the device, press and hold the Power button (5) for 3 seconds. Then, the

shutdown countdown screen appears. When the countdown icon turns from 3 to 0, the

device shuts down. When the device is powering off and saving data, do not

disconnect it from the power source. Otherwise, the data cannot be saved.

Press the power button (5) and the device will enter standby mode. Press the power

button (5) to wake it up.

IX. Zeroing

The Tube series adopts the "freezing" zeroing method. It is recommended to carry out the

zeroing operation within the range of operating temperature of the scope.

Fix the scope on the weapon with a frock clamp;

Select a target at a certain distance, such as 100m, 200m, etc.;

Adjust the scope according to the operating instructions as described in Chapter VIII

Startup and Configuration;

Select zeroing profile (refer to "Reticle Setup-Zeroing Profile" in the advanced menu

function);

Andere Handbücher für Tube Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere InfiRay Wärmebildkamera Handbücher

InfiRay

InfiRay AT20 Bedienungsanleitung

InfiRay

InfiRay AT20 Bedienungsanleitung

InfiRay

InfiRay Xmini Bedienungsanleitung

InfiRay

InfiRay Cabin Series Bedienungsanleitung

InfiRay

InfiRay M200 Series Bedienungsanleitung

InfiRay

InfiRay Clip CH50 V2 Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

InfiRay

InfiRay AT31F Bedienungsanleitung

InfiRay

InfiRay Tianshu C Series Bedienungsanleitung

InfiRay

InfiRay AT31 Bedienungsanleitung

InfiRay

InfiRay XTHERM II Bedienungsanleitung

InfiRay

InfiRay Tianxuan M20 Series Bedienungsanleitung

InfiRay

InfiRay AT31F Bedienungsanleitung

InfiRay

InfiRay Geni Series Bedienungsanleitung

InfiRay

InfiRay ZOOM ZL38 Bedienungsanleitung

InfiRay

InfiRay P Series Bedienungsanleitung

InfiRay

InfiRay PT2 Bedienungsanleitung

InfiRay

InfiRay Night Vision Go Bedienungsanleitung

InfiRay

InfiRay CLIP NV Series Bedienungsanleitung

InfiRay

InfiRay P2 Pro Bedienungsanleitung

InfiRay

InfiRay Xmini Series Bedienungsanleitung

InfiRay

InfiRay T Series Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

InfiRay

InfiRay FINDER FH35R Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR M-Series Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

FLIR

FLIR X6530sc Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung

Major tech

Major tech MTi11 Bedienungsanleitung

COHU

COHU 5935-1000/T100 Bedienungsanleitung

FLIR

FLIR T4xx series Bedienungsanleitung