infobit HDV-CTL100 Bedienungsanleitung
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electr-ical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction...........................................................................................
2. Features.................................................................................................
3. Package Contents................................................................................
4. Specifications.......................................................................................
5. Operation Controls and Functions......................................................
5.1 Front Panel......................................................................................
5.2 Rear Panel.......................................................................................
5.3 IR Pin Definition...............................................................................
6. Rack Mounting Instruction..................................................................
6.1 6U Rack Mounting..........................................................................
6.2 1U Rack Mounting..........................................................................
7. Web GUI User Guide.............................................................................
7.1 Preparation before Entering the System.......................................
7.2 Functions and Operation................................................................
8. Application Example............................................................................
1
1
1
2
2
2
3
4
4
4
6
7
7
15
27
1. Introduction
2. Features
☆Easy to create project, control and manage the system
☆Flexibly support Auto, DHCP and Manual three types of IP configurations
☆HTTPS, SSH, SFTP security compatible
☆Built-in Web GUI control interface, supporting Drag & Drop operations
☆Support image preview
☆Support video, audio, RS-232, IR, KVM control and management of the
distributed system
☆Dual network ports (VIDEO LAN port supports POE function) to isolate
Controls and Multicast networks.
☆ Support LAN/RS-232 port control and third-party central control
☆Support IR signal receiving (3.5mm audio jack, 12V level)
☆ 4 channel GPIO control ports (5V/12V optional level)
☆ Multiple circuits protection, lightning protection and ESD design
☆ Reliable system design, ensuring 7*24 hours reliable and stable work
3. Package Contents
① 1 ⅹVideo over IP Controller
② 1 ⅹ 20kHz-60kHz 12V IR Receiver Cable (1.5 meters)
③ 1 ⅹ 3-pin 3.81mm Phoenix Connector (Male)
④ 1 ⅹ 6-pin 3.81mm Phoenix Connector (Male)
⑤ 2 ⅹ Mounting Ears
⑥ 4 ⅹ Machine Screws (KM3*6)
⑦ 1 ⅹ 12V/1A Locking Power Adaptor
⑧ 1 ⅹ User Manual
1/29
This Video over IP Controller is used to control and manage JPEG2000
IP products. It supports dual 100M network ports, which can realize dual-
network isolation of Control network and Multicast video distribution network.
Built-in Web GUI, TCP and RS-232 control are supported. It supports POE
function and wide-band 12V IR signal receiving. Since the demand of IP
products is daily increased in the current market, the IP Controller will be
widely applied in more and more different scenarios.
4. Specifications
5. Operation Controls and Functions
Network Video
Bandwidth Up to 100M
Transmission
Distance
Technical
Metal Enclosure
Dimensions
Housing
2 x 100M LAN [RJ45 connector] [VIDEO LAN support POE]
1 x IR IN [3.5mm audio jack, 12V level]
1 x DIGITAL I/O [6-pin 3.81mm phoenix connector]
1 x RS-232 [3-pin 3.81mm phoenix connector]
204mm(W)×98mm(D)×21mm(H)
Control Ports
12V/1A
4.5W
0°C ~ 40°C / 32°F ~ 104°F
-20°C ~ 60°C / -4°F ~ 140°F
Power Supply
Operating
Temperature
Storage Temperature
Relative Humidity 20~90% RH (non-condensing)
Power Consumption
100m CAT 5E/6/6A/7
BlackColor
Weight
5.1 Front Panel
123
2/29
RESET
POWER STATUS
509g
8765
No. Function DescriptionName
1 2 4
1 RESET Button Press and hold this button (about 10 seconds) until Status
LED starts flashing, Controller will be reset automatically.
2 POWER LED The red LED will light on when the Controller is powered on.
3 STATUS LED
The status LED will flash in yellowish-green every 1 second
until Controller boots up completely and Control LAN is
ready, then it becomes solid.
3/29
3
5.2 Rear Panel
No. Function DescriptionName
1 DC 12V DC 12V/1A power input port.
2VIDEO LAN
(POE)
100M Video LAN port, supporting POE function.
Note: When POE is enabled, DC 12V/1A power supply is
not required.
3CONTROL
LAN The TCP/IP control network port.
4MCU/Normal
DIP Switch
Normal mode: The RS-232 port is used for serial port
commands control.
MCU mode: The RS-232 port is used for MCU software
upgrade.
53-pin Phoenix
Connector RS-232 serial communication port.
66-pin Phoenix
Connector
4 channel I/O level outputs, 1 channel grounding,
1 channel power supply to the outside.
7IO LEVEL
DIP Switch
Used to control I/O level output and VOUT voltage.
Switch to left: 5V I/O level output, VOUT is 5V.
Switch to right: 12V I/O level output, VOUT is 12V.
8IR IN 12V IR signal input port.
DC 12V
IO1
IO2
IO3
IO4
5V 12V
IR IN
IO LEVEL
VOUT
NORMAL
MCU
5.3 IR Pin Definition
IR RECEIVER
Power 12V
IR RECEIVER
6. Rack Mounting Instruction
This Controller can be mounted in a standard 6U rack (Please contact your
supplier for 6U rack sale). The mounting steps are as follows:
6.1 6U Rack Mounting
Step 1: Use included screws to fix two mounting ears on the Controller, as
shown in the figure below:
4/29
5 /29
Step 2: Insert the Controller with mounting ears into a 6U rack (up to 10
units can be installed vertically), as shown in the figure below:
Step 3: Use screws to fix mounting ears on the rack to complete the
mounting, as shown in the figure below:
6.2 1U Rack Mounting
This Controller also can be mounted in a standard 1U rack (up to 4 units can
be installed horizontally). The mounting steps are as follows:
Step 1: Stack two Controllers on top of each other, then use included screws
to fix two 1U rack panels on the Controllers, as shown in the figure below:
6 /29
Step 2: Fix two 1U rack panels on another two stacked Controllers in the
same way, then use screws to fix two 1U rack panels together, as shown
in the figure below:
Step 3: Fasten screws between two 1U rack panels, so that four Controllers
are mounted in a 1U rack, as shown in the figure below:
7. Web GUI User Guide
You can use Controller’s Web GUI to control all IP products at the Switch.
The operation method is shown as below:
7/29
Step 1: Input the Controller’s default IP address (192.168.0.225) or the URL
(http://controller.local) into the Web browser address bar on the PC to enter the
Web GUI login interface.
Select the initial username (admin) and input the initial password (1234) on
the above login interface. Then, click “Log In” to enter the Web GUI interface.
For the first time, you need to setup the project, as shown in the following
figure:
7.1 Preparation before Entering the System
8/29
Step 2: Click the “Close” button to load an existing project in web page
directly, or click “Next” button to go to the next step.
On this interface, you need to set the IP mode of Video LAN.
Mode 1: Automatically managed by Controller Box.
Please connect all the devices according to the following diagram.
Video Wall
4 × DEC
Controller Box
1G Ethernet Switch
DVD
DVD
DVD
DVD
TV
TV
TV
TV
ENC DEC
DEC
DEC
DEC
IRIN IROUT USBHOST
RXTX
RS-232
RLRL
AUDIOIN OUT HDMI OUT HDMI IN
DC12V
IRIN IROUT USBHOST
RXTX
RS-232
RLRL
AUDIOIN OUT HDMI OUT HDMI IN
DC12V
IRIN IROUT USBHOST
RXTX
RS-232
RLRL
AUDIOIN OUT HDMI OUT HDMI IN
DC12V
IRIN IROUT USBHOST
RXTX
RS-232
RLRL
AUDIOIN OUT HDMI OUT HDMI IN
DC12V
ENC
ENC
ENC
IRIN IROUT
1 2 RLRLRXTX
RS-232 HDMIOUT
DC12V AUDIOIN OUT
USBDEVICE 2.0
IRIN IROUT
1 2 RLRLRXTX
RS-232 HDMIOUT
DC12V AUDIOIN OUT
USBDEVICE 2.0
IRIN IROUT
1 2 RLRLRXTX
RS-232 HDMIOUT
DC12V AUDIOIN OUT
USBDEVICE 2.0
IRIN IROUT
1 2 RLRLRXTX
RS-232 HDMIOUT
DC12V AUDIOIN OUT
USBDEVICE 2.0
IRIN IROUT
1 2 RLRLRXTX
RS-232 HDMIOUT
DC12V AUDIOIN OUT
USBDEVICE 2.0
IRIN IROUT
1 2 RLRLRXTX
RS-232 HDMIOUT
DC12V AUDIOIN OUT
USBDEVICE 2.0
DC 12V
IO1
IO2
IO3
IO4
5V 12V
IR IN
IO LEVEL
VOUT
NORMAL
MCU
PC
TP-LINK
Router (optional)
Inhaltsverzeichnis
Andere infobit Controller Handbücher
