Infobit IWall 360 Bedienungsanleitung

iWall 360

User Manual

 
1 
Content 
1. Overview ................................................................................................................................. 3
2. Technical Index......................................................................................................................... 3
1) Electrical index................................................................................................................. 3
2) Environment index........................................................................................................... 3
3) Video input index............................................................................................................. 3
4) Video output index........................................................................................................... 3
5) Control methods .............................................................................................................. 4
6) Mechanical index ............................................................................................................. 4
3. Appearance Description........................................................................................................... 4
1) Front port ........................................................................................................................ 4
2) Rear port.......................................................................................................................... 5
4. Application Specification.......................................................................................................... 6
1) Input configuration .......................................................................................................... 6
2) Output configuration........................................................................................................ 6
3) Cascading configuration ................................................................................................... 7
4) Scene configuration.......................................................................................................... 8
5. Operating instructions of upper computer ............................................................................... 8
1) Introduction ................................................................................................................. 8
2) Software installation ........................................................................................................ 8
3) System login................................................................................................................... 11 
(1) Connect to server.................................................................................................. 11 
(2) Disconnect to server.............................................................................................. 12 
(3) Modify IP............................................................................................................... 13 
(4) Notes .................................................................................................................... 14 
4) Output settings .............................................................................................................. 14 

 
2 
(1) Screen setup area.................................................................................................. 15 
(2) Screen adjusting area ............................................................................................ 20 
(3) Auxiliary tools area................................................................................................ 22 
5) Window operation ......................................................................................................... 23 
(1) Open window........................................................................................................ 23 
(2) Close window........................................................................................................ 24 
(3) Zoom window ....................................................................................................... 24 
(4) Scroll window........................................................................................................ 25 
(5) Window animation................................................................................................ 25 
6) Update EDID .................................................................................................................. 25 
7) Change Mode................................................................................................................. 27 
(1) Select the mode .................................................................................................... 28 
(2) Cascade set ........................................................................................................... 28 
(3) The limitation of open the window........................................................................ 29 
8) Modify device name....................................................................................................... 29 
9) Query input resolution ................................................................................................... 29 
10) Version of the query..................................................................................................... 30 
6. Online upgrade ...................................................................................................................... 30 
 
 

1. Overview

The iWall 360 supports one 4K HDMI input signal and four HDMI outputs. It also supports image

cropping, any degree rotation, blending display and infinite device cascading.

2. Technical Index

1) Electrical index

Supply voltage: DC 12V

2) Environment index

Working temperature: 0℃ - 40℃

Storage temperature: -10℃ - 60℃

Storage environment: No solvent and corrosive gas, no dust, no interference of strong magnetic

field;

3) Video input index

The device uses HDMI 1.4 standard input port supports resolutions including 3840 x 2160@30,

3840 x 2160@25, 2560 x 1600@60, 1920 x 1200@60 and compatible backwards, with audio

input.

4) Video output index

The device uses HDMI 1.3 standard output port supports up to 1920 x 1200 resolution video

output. The device also supports 3.5mm individual analog audio output.

5) Control methods

Using the software SmartEditor to communicate and control via RJ-45 connector (LAN 1);

The device includes 2 LAN ports (LAN 1 and LAN 2). The devices can cascade in series via

connection from LAN 2 port of one device to LAN 1 port of the next.

Note: when there are no correct input signals, devices will display their IP addresses of LAN 1 on

displays.

6) Mechanical index

Appearance size: 208 x 45 x 199mm (8.19 x 1.77 x 7.83 in)

3. Appearance Description

1) Front port

The front side of The iWall 360 is shown in figure 1, the interface detail as following table 1：

Figure 3-1 The iWall 360 device front view

Table 1 The iWall 360 processor front interface detail

Connector

Description

12V power connector with lock

Reset button, after 5s pf push, device IP will reset as 192.168.1.25;

each individual window would be reset as full window display;

LAN1, RJ-45 connector, controls device by connect PC or router;

LAN2 used for cascading of additional devices;

HDMI input;

Status light:

When power on, POWER lights on;

When device is working normally, RUN light on;

When signal input connected, INPUT lights on;

2) Rear port

The iWall 360 device back side, the interfaces as following:

Figure 3-1 The iWall 360 device back view

Table 2 The iWall 360 device back side interface details

Connector

Description

Ground

3.5mm audio analog connector

4 HDMI output ports

Cascading interfaces:

IN for cascading input；

OUT for cascading output；

4. Application Specification

1) Input configuration

Each individual device supports only one local input signal source, and each input signal source

can open only one window on the whole output system.

2) Output configuration

(1) Each device has 4 HDMI output ports.

(2) Each output has image rotation function, allow to do any degree rotation.

(3) The output settings support any position and layout, namely, the display screen of the output

terminals can support every moving, overlaying and other operations;

3) Cascading configuration

(1) The device hardware supports infinite number of device cascading.

(2) In one group of cascading devices, there must be only one master device and all of the rest

devices must be slave devices, following single way cascading. The main purpose of device

cascading is to put one input source on more outputs to make a larger and better display

performance.

(3) When devices join in a cascading group, each device’s output can only support one window,

and the content depends on the device’s cascading mode.

(4) The cascading device input sources include “Get local data; Transfer local data”, “Get

cascading data; Transfer local data”, “Get local data; Transfer cascading data”, and “Get cascading

data; Transfer cascading data”.

“Local data” is the input signals from device’s input port; “Cascading data” is the signals from

cascading ports of other devices. The cascading data could be different as the different device

statuses in the system.

a. Get local data, transfer local data: This device will use the local input for video

output and will send its local input to the next device.

b. Get cascading data, transfer local data: This device will use the signal from cascading

input for video output and will send its local input to the next device.

c. Get local data, transfer cascading data: This device will use the local input for video

output and will send the signal from cascading input to next device.

d. Get cascading data, transfer cascading data: This device will use the signal from

cascading input for video output and send the signal from cascading input to the next

device.

(4) In the group of cascading devices, there are only the devices which have embedded audio

input would have audio output.

4) Scene configuration

The device can auto-save the last scene of the operation prior to power outage and load the

scene after the power is back on. The device can save infinite number of scenes with software,

but the scene can only be called out by software. The device hardware can save up to 4 scenes,

and load by serial port command.

5. Operating instructions of upper computer

1) Introduction

This article introduces the methods of the software at the client side, including software

installation and operation.

2) Software installation

(1) Run the installation file of SmartEditor-x.x.x.x.exe to start installation. The installation

interface is shown in the following figure 5-1.

Figure 5-1

(2) Select the language and click OK to enter the next interface.

(3) select the “I Agree” to enter the next interface, as shown in the figure 5-2；

Figure 5-3

(4) Select the “Next” to enter the next interface, as shown in the figure 5-3;

Figure 5-4

(5) Select the suitable installation root directory, and click the “Install”, as shown in the figure 5-4;

Inhaltsverzeichnis

Andere infobit Netzwerk-Hardware Handbücher

infobit

infobit iMatrix H44VAW Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

infobit iWall 360 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken