InFocus SP-CEIL-UNIV Leitfaden

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 1 of 11

Read instruction sheet before you start installation and assembly.

Maximum Load Capacity: 25 lb (11 kg)

Installation andAssembly-All-in-one ProjectorAdapter Plate for

InFocus®Projectors Model: SP-CEIL-UNIV

IMPORTANT! Turn to the appropriate page for your ceiling installation.

This product is intended for use with UL

Listed products and must be installed

by a qualified professional installer.

Applications:

FlushMount................................................................................................................................................. page 5

ExtensionColumn........................................................................................................................................ page 6

Lightweight Suspended Ceiling Plate ....................................................................................................... page 7

Installations:

To Wood Joist Finished Ceilings,

Exposed Wood Joists, or Wood Beam Ceilings........................................................................................ page 3

To Concrete Ceilings.................................................................................................................................... page 4

• Makesurethatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandallattachedhard-

wareandcomponents.

WARNING

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 2 of 11

Parts List

Before you start check the parts list to insure all of the parts shown are included.

Description Qty. Part Number

Aprojectormountassembly 1 055-0420

B4 mm security allen wrench 1 560-9646

C#10-32 x 3/8" serrated socket pin screw 2 520-1151

D#10-32 x 1/4" socket pin screw 1 520-1196

E1/4"flatwasher 2 540-9440

F#14 x 2.5 phillips hex head wood screw 2 5S1-015-C03

Gconcreteanchor 2 590-0097

HM4 x 16 mm serrated socket pin screw 3 510-1087

IM4 x 12 mm serrated socket pin screw 1 510-1079

J.198 x .313 x .375 retaining spacer 3 590-2020

K.198 x .313 x .187 retaining spacer 1 590-1030

L.25" ID x .56" OD x .26" spacer 6 590-1050

MM5 x 10 mm socket pin screw 1 520-1164

N#10-32 x 3/16" slotted set screw 1 520-1187

OM6 x 12 mm serrated socket pin screw 4 510-1050

PM4 x 6 mm serrated socket pin screw 2 510-1059

Qceilingplate 1 580-1042

Radapterplate 1 055-1539

Sextensionbracket 2 055-1540

Note: Actual parts may appear slightly different than illustrated. FASTENERS

J K

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 3 of 11

WOOD

JOIST

CEILING

Drill two 5/32" (4 mm) dia. holes to a minimum depth

of 2.5" (64 mm). Attach ceiling plate (Q) with two

#14 x 2.5" (6 mm x 65 mm) wood screws (F) as

shown using 3/8" (10 mm) socket wrench. Tighten

wood screws (F) so ceiling plate (Q) is firmly

attached.

Skip to step 7.

Installation To Wood Joist Finished Ceilings, Exposed

Wood Joists, or Wood Beam Ceilings

For optional Cord Management,

install two spacers (L) between ceiling

plate(Q)andceiling.

WOOD

JOIST

CEILING

• Tighten wood screws so that ceiling plate is firmly

attached,but do notovertighten.Overtightening can

damagethescrews, greatly reducing theirholding

power.

• Never tighten in excess of 80 in • lb (9 N.M.).

• Make sure that mounting screws are anchored into the

center of the joist. The use of an "edge to edge" stud

finderis highly recommended.

WARNING

Disengageconnectionblock from projector mountassembly(A) by unscrewing captivescrewand sliding out

connection block as shown.

CONNECTIONBLOCK

CAPTIVESCREW

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 4 of 11

Drill two 1/4" (6 mm) dia. holes to a minimum depth of

2.5" (64 mm). Attach ceiling plate (Q) using two

concrete anchors (G) and #14 x 2.5" wood screws (F)

as shown in Illustration A and 1, 2, and 3. Tighten all

fasteners.

Skip to step 7.

Illustration A

Installation to Concrete Ceilings

Alligator® concrete anchors are recommended.

Drill hole and insert anchor.

concrete

ceiling

CUTAWAYVIEW

CONCRETECEILING

• Concrete anchors are notintendedforattachmentto

concretewallcovered with a layer ofplaster,drywall,

orotherfinishing material. If mounting to concretewall

coveredwith plaster/drywall isunavoidable, plaster/

drywall (up to 5/8" thick) must be counterbored as

shown below. If plaster/drywall is thicker than 5/8",

custom fasteners must be supplied by installer.

WARNING

• Make sure that the supporting surface will safely

supportthecombinedload of the equipment andall

attachedhardware andcomponents.

• Tightenconcreteanchorbolt firmly,but donotover-

tighten.Overtighteningcan damage thebolt,greatly

reducingits holdingpower.

• Never tighten in excess of 80 in • lb (9 N.M.).

WARNING

Place ceiling plate over anchor and secure with screw.

After repeating step one tighten all fasteners.

INCORRECT

concrete

metal

bracket

plaster/

drywall

CORRECT

concrete

metal

bracket

plaster/

drywall

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 5 of 11

Flush Mount Installation

Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach projector mount assembly (A) with two

#14 x 2.5" (6 mm x 65 mm) wood screws (F) and two flat washers (E) as shown in figure 1 or figure 2 depending

on joist orientation. Tighten wood screws (F) using 3/8" (10 mm) socket wrench until projector mount assembly (A)

is firmly attached.

Skip to step 7.

WOODJOIST

FRONTOF

MOUNT

FRONTOF

MOUNT

WOODJOIST

figure 1 figure 2

• Tightenwoodscrewsso that projector mount assem-

blyisfirmlyattached, but do not overtighten.Overtight-

eningcandamagethe screws, greatly reducing their

holdingpower.

• Never tighten in excess of 80 in • lb (9 N.M.).

• Make sure that mounting screws are anchored into the

center of the joist. The use of an "edge to edge" stud

finderis highly recommended.

WARNING

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 6 of 11

Screwextensioncolumn(soldseparately)to

ceiling plate (Q). Align the notch with one of the

four holes in the ceiling plate (Q) and secure

extension column with a M5 x 10 mm socket pin

screw (M) using security allen wrench (B). See

detail 3.

Screwprojectormountassembly (A) onto the

extension column as shown in detail 4.

Note: For3/4"extensioncolumns,reducer

ACC 913 will be required as shown in detail 5.

Tightenswivelstopscrewagainstextension

columnor reducer usingsecurityallen wrench(B).

Note: Swivel stop screw is used to jam against

threadsofextensioncolumnorreducertoprevent

anyexcessmovement ofprojectormount

assembly(A).Donotovertightenscrew;

overtighteningscrewwilldamagethreadsmaking

it difficult to separate products.

Note: Slotted set screws (N) are used to jam

against the threads of each connecting joint to

preventanyexcessmovement.Donotovertighten

screws;overtighteningscrewswilldamage

threads making it difficult to separate the

products.

Skip to step 7.

Installation to Extension Column (SP-EXTARM-01, SP-

EXTARM-02, SP-EXTARM-03, SP-EXTARM-04)

SWIVELSTOPSCREW

BACKOF

MOUNT

3/4"EXTENSIONCOLUMN

ACC 913

(NOTULLISTED)

DETAIL 3

EXTENSION

COLUMN

SWIVELSTOPSCREW BACK OF

MOUNT

DETAIL 4

DETAIL 5

EXTENSIONCOLUMN

(SOLDSEPARATELY)

(ULLISTED)

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 7 of 11

Installation to

Lightweight Suspended

Ceiling Plate

(EXT-LTMT-PLTB)

DETAIL 7

EXTENSION

COLUMN

(ULLISTED)

Refertoinstructionsheetforlightweight

suspendedceilingplate(sold

separately)forattachmentofceiling

plate to ceiling.

Screwextensioncolumn (sold

separately) to retaining collar in ceiling

tray. Align the notch with one of the

fourholes inretaining collarand secure

extension column with a M5 x 10 mm

socket pin screw (M) using security

allen wrench (B). See detail 6.

Screwprojectormount assembly(A)

onto the extension column as shown in

detail 7.

Note: For 3/4" extension columns,

reducerACC913willberequiredas

shown in detail 8.

Tightenswivelstopscrewagainst

extensioncolumnorreducerusing

securityallenwrench(B).

Note: Swivel stop screw is used to jam

againstthreadsof extension columnor

reducertopreventanyexcess

movementofprojectormountassembly

(A).Donotovertightenscrew;

overtighteningscrewwilldamage

threads making it difficult to separate

products.

Note: Slotted set screws (N) are used

to jam against the threads of each

connecting joint to prevent any excess

movement.Donotovertightenscrews;

overtighteningscrewswilldamage

threads making it difficult to separate

theproducts.

Skip to step 7.

DETAIL 6

RETAININGCOLLAR

LIGHTWEIGHT

SUSPENDEDCEILING

PLATE (SOLD

SEPARATELY)

SWIVELSTOPSCREW

BACKOF

MOUNT

3/4"EXTENSION

COLUMN

ACC 913

(NOTUL

LISTED)

DETAIL 8

PLTB

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 8 of 11

Note:The projector adapter plateandprojector you are installingmaydifferin appearance from thesampleillustrated

below.

Align shoulder on connection block opposite of front of projector. Attach adapter plate (R) to connection block from

projector mount assembly (A) using two #10-32 x 3/8" serrated socket pin screws (C) as shown.

CONNECTION BLOCK

ADAPTER PLATE

SHOULDER

RAttach extension brackets (S) to adapter plate (R)

using two M4 x 6 mm serrated socket pin screws (P).

For specific models, see step 8H.

FRONTOF

PROJECTOR

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 9 of 11

Flip projector upside down. Find your projector from the models listed below. Using the holes indicated on the corre-

sponding hole pattern diagram, attach adapter plate (R) to projector using three M4 x 16 mm serrated socket pin

screws (H) and three .198 x .313 x .375 retaining spacers (J).

Notes:

Retainingspacersgo betweenadapterplate and projector.

* Frontof projector.

** Projectors using hole pattern Guse one M4 x 12 mm screw (I) and one .198 x .313 x .187 retaining spacer (K)

whereindicated.

*** Using holes indicated in hole pattern H, attach adapter plate (R) to projector using four M6 x 12 mm serrated

socket pin screws (O) and four spacers (L)

B. C40,C50, DP2000S,DP2000X,

LP240,LP250

D. C100,C105, DP6150,DP6155,

LP690 E. C109,C110, DP8000,LP790,

SP4800,SP4805, X1,X1a, X2,X3 F. C170, LP600

C. LP340,LP350,LP500, LP530,

SP110

G. C160,C180, LP540, LP640,

SP5000 H. C440,C450,C460,DP8400X,

DP8500X,LP840, LP850,LP860

***

****

RRR

*** ***

***

A. C200,DP6500X, LP650,SP5700,

SP7200,SP7205,SP7210

I. C410,C420, LP815, LP820,

DP8200X

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 10 of 11

Slideconnectionblock with projector into projector mount

assembly (A) as shown. Tighten captive screw to secure

projectortoprojectormount assembly (A).

IMPORTANT: For security installations, insert

one #10-32 x 1/4" socket pin screw (D) through

projectormountassembly(A)and intoconnection

block as shown.

ACONNECTIONBLOCK

CONNECTIONBLOCK

CAPTIVESCREW

FRONTOFMOUNT

• Always use an assistant or mechanical lifting equipment to safely lift and position the projector.

WARNING

J. IN72,IN74,IN76 K. IN24,IN26

Inhaltsverzeichnis

Andere InFocus Projektorzubehör Handbücher

InFocus

InFocus WT96 Bedienungsanleitung

InFocus

InFocus SP-CEIL-010 Bedienungsanleitung

InFocus

InFocus LiteProLS Bedienungsanleitung

InFocus

InFocus SP-LAMP-088 Leitfaden

InFocus

InFocus IN42 Leitfaden

InFocus

InFocus CEILING MOUNT LP 1000 SERIES Bedienungsanleitung

InFocus

InFocus LP130 Leitfaden

InFocus

InFocus SP-CEIL-001 Bedienungsanleitung

InFocus

InFocus LITESHOW4 DB+ Bedienungsanleitung

InFocus

InFocus LiteShow network adapter Bedienungsanleitung

InFocus

InFocus SP-CEIL-012 Bedienungsanleitung

InFocus

InFocus CableWizard SP-CW3 Kurzanleitung

InFocus

InFocus LiteShow 4 DB+ Bedienungsanleitung

InFocus

InFocus SP-LAMP-090 Leitfaden

InFocus

InFocus SP777 Bedienungsanleitung

InFocus

InFocus SP-LAMP-086 Leitfaden

InFocus

InFocus SP-LAMP-080 Leitfaden

InFocus

InFocus LASER PROJECTOR LP 540 Leitfaden

InFocus

InFocus LP 650 Leitfaden

InFocus

InFocus SP-CEIL-003 Bedienungsanleitung

InFocus

InFocus SP-CEIL-004 Bedienungsanleitung

InFocus

InFocus SP-LAMP-073 Leitfaden

InFocus

InFocus LNS-W01 Leitfaden

InFocus

InFocus SP-LAMP-092 Leitfaden

Beliebte Projektorzubehör Handbücher anderer Marken

Optoma

Optoma BX-AL133B Bedienungsanleitung

PEERLESS

PEERLESS PE 1120 Leitfaden

Osram

Osram SIRIUS HRI Series Handbuch

Presentation Switchers

Presentation Switchers PS111 Bedienungsanleitung

Kramer

Kramer VIA GO Bedienungsanleitung

Yamaha

Yamaha PJL-112 Stücklistenhandbuch

Mitsubishi Electric

Mitsubishi Electric 236CB Betriebsanleitung

Epson

Epson BrightLink 475Wi Bedienungsanleitung

Acer

Acer WP100 Bedienungsanleitung

i3 i3board Bedienungsanleitung

CHIEF

CHIEF HB-43E Bedienungsanleitung

Biamp

Biamp Modena Hub Service-Handbuch

NEC

NEC MP10RX Bedienungsanleitung

Panamorph

Panamorph DCR-S3 Bedienungsanleitung

Exact solutions

Exact solutions FRAME-EVO-P10 Bedienungsanleitung

CHIEF

CHIEF VCM103S Bedienungsanleitung

Sharp

Sharp AN-PH20EZ Bedienungsanleitung

Ipevo

Ipevo WPS-HD Bedienungsanleitung