InFocus IN42 Gebrauchs- und Pflegehandbuch

IN42 / C445

RS-232C communication

Communication Configuration

To control this projector via RS-232, connect a null modem cable and set the control system serial port

settings to match the following communication configuration:

RS-232 Port Settings

Setting Value

Bits per second 19,200

Data bits 8

Parity None

Stop bits 1

Flow control None

Emulation VT100

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request

can be a read request (indicated by a “?”) or a write request (indicated by 1 to 4 ASCII digits).

A read request example:

(AAA?) where

(starts the command

AAA denotes the command

? denotes the read request)

ends the command

A read command returns the range and the current setting, for example:

Read Command Examples

Function Command Response

Brightness (BRT?) (96-160, 128)

Volume (VOL?) (0-32, 0)

Lamp Hours (LMP?) (0-32766, 42)

A write request example:

(AAA####) where

(starts the command

AAA denotes the command

#### denotes the value to be written

(leading zeros not necessary)

) ends the command

Some commands have ranges, while others are absolute. If a number greater than the maximum range is

received, it is automatically set to the maximum number for that function. If a command is received that is not

understood, a “?” is returned. With absolute settings, “0” is off, 1-9999 is on. The one excep-tion is the Power

command, where 0 is off and 1 is on.

To assure the projector can process a command, wait 3 seconds before enter-ing the next command.

IN42 / C445

Write Command Examples

Function Command Response

Brightness (BRT140) Sets the brightness to 140

Power (PWRO) Turns power off

Power (PWRI) Turns power on

Error Conditions

Not all commands are supported for all projectors. If an unsupported com-mand is issued, the command will

be ignored. If a command is received that is not understood, a ‘?’ character will be returned indicating the

command was not understood.

Limitations

The projector cannot respond to commands coming in at a high-rate. There-fore, a delay must occur between

commands to ensure that the command gets properly executed. To assure the projector can process a com-

mand, wait 3 seconds before entering the next command.

The Step column refers to increasing or decreasing the menu bar position since the On-screen Display is not an

exact match of values. For example, Step 2 changes the data by 2 through the CLI (Command Line Interface).

The menu bar is up (or down) by 1.

Function Com-mand Min Max De-fault Step

About (Source Info)

0: n/a

1: enable

ABT at W 0 1 n/a

Active lris

0: Off

1: Presentation

2: Film

IRI at RW 0 2 1

Aspect Ratio

0: Native

1: 16:9

2: 4:3

ARZ at RW 0 2 2

Auto Image

0: n/a

1: enable

AIM at W 0 1 n/a

Auto Power

0: disable

1: enable

APO at RW 0 1 0

Auto Source

0: disable

1: enable

ASC at RW 0 1 1

Blank

0: off

1: on

BLK at RW 0 1 0

IN42 / C445

Function Com-mand Min Max De-fault Step

Blank Screen

0: black

1: blue

2: white

BSC at RW 0 2 1

Blue Gain BCG at RW 64 192 128 1

Brightness BRT at RW 96 160 128 1

Ceiling

0: disable

1: enable

CEL at RW 0 1 0

Chime

0: disable

1: enable

ACE at RW 0 1 1

Color CLR at RW 96 160 128 1

Color Space

0: RGB

1: SMPTE240

2: REC709

3: REC601

7: Auto

CSM at RW 0 7 7

Color Temp

0: 9300K

1: 6500K

2: 7200K

3: User

TMP at RW 0 3 2 (computer)

1 (video)

Contrast CON at RW 96 160 128 1

Custom Key (Effect)

0: blank

1: mute

2: aspect ratio

3: source

4: auto image

5: freeze

6: Magnify (Zoom)

7: Source Info

8: Service Info

EFK at RW 0 8 7

Display Messages

0: disable

1: enable

DMG at RW 0 1 1

Factory Reset

0: not reset

1: reset

RST at W 0 1 n/a

Freeze

0: disable

1: enable

FRT at RW 0 1 0

Green Gain GCG at RW 64 192 128 1

Horizontal Keystone DKH at RW 38 218 128 1

Horizontal Position HPS at RW def:-

128 def:+1

28 auto 1

Internal Sound Enable

0: disable

1: enable

INT at RW 0 1 1

IR Receiver front

0: disable

1: enable

IRF at RW 0 1 1

IN42 / C445

Function Com-mand Min Max De-fault Step

IR Receiver rear

0: disable

1: enable

IRR at RW 0 1 1

IR Receiver top

0: disable

1: enable

IRT at RW 0 1 0

Language

0= English

1= French

2= German

3= Spanish

7= Portuguese

10= Simplified

Chinese

11= Italian

12= Swedish

LAN at RW 0 12 0

Lamp Hours LMP at R 0 32766 0 1

Lamp Lit

0: not lit

1: lit

LML at R 0 1

Reset Lamp Hours

0: not reset

1: reset

LRT at W 0 1 n/a

Number of Lamp

Resets LMR at R 0 32766 0

Lamp Total On Time

(All Bulbs) LMT at R 0 21474

83646 0

Time In Hours Last

Bulb1 Lasted LBI at R 0 32766 0

Time In Hours Last

Bulb2 Lasted LB2 at R 0 32766 0

Time In Hours Last

Bulb3 Lasted LB3 at R 0 32766 0

Low Power

0: disable

1: enable

LPE at RW 0 1 0

Magnify MAG at RW 0 48 0 1

Magnify Enable

0: disable

1: enable

MGE at RW 0 1 0

Magnify Position

Horizontal (*) MPH at RW 128 896 512 1

Magnify Position

Vertical (*) MPV at RW 96 672 384 1

0: disable

1: enable

MNU at RW 0 1 0

Menu Navigation

0: up

1: down

4: select

NAV at W 0 4 n/a

Mute

0: disable

1: enable

MTE at RW 0 1 0

(*) Depends on INPUT signal and Magnify value. This is a sample value of

XGA and MAX magnify.

IN42 / C445

Function Com-mand Min Max De-fault Step

NND (PC Screen

Saver Off)

0: disable

1: enable

NND at RW 0 1 1

Overscan

0: disable

1: enable

OVS at RW 0 1 0

Phase MSS at RW 0 26 0 1

Power

0: disable

1: enable

PWR at RW 0 1 0

Power Save

0: disable

1: enable

PSV at RW 0 1 0

Power-up Source

0: computer 1

1: computer 2

2: video 1

3: video 2

4: video 3

DSC at RW 0 4 0

Presets

0: presentation

1: photography

2: film

3: video

9: Presets Off

10: user 1

11: user 2

12: user 3

PST at RW 0 12 c:0

v:2

Rear

0: disable

1: enable

REA at RW 0 1 0

Red Gain RCG at RW 64 192 128 1

Reset Filter Hours

0: not reset

1: reset

FRT at W 0 1 n/a

Save User Presets 1

0: not saved

1: saved

US1 at W 0 1 n/a

Save User Presets 2

0: not saved

1: saved

US2 at W 0 1 n/a

Save User Presets 3

0: not saved

1: saved US3 at W 0 1 n/a

Screen Save

0: 5 minutes

1: 10 minutes

2: 15 minutes

3: 20 minutes

4: 25 minutes

5: 30 minutes

SSV at RW 0 5 0

Sharpness

5= Sharpest

6= Sharper

7= Standard

8= Softer

9= Softest

SHP at RW 5 9 7 (computer

and video 1)

6 (video 2

and 3)

IN42 / C445

Function Com-mand Min Max De-fault Step

Source

0: computer1

1: computer2

2: video 1

3: video 2

4: video 3

SRC at RW 0 4 0

Source 1

0: computer1

1: computer2

2: video 1

3: video 2

4: video 3

SR1 at RW 0 4 0

Source 2

0: computer1

1: computer2

2: video 1

3: video 2

4: video 3

SR2 at RW 0 4 1

Source 3

0: computer1

1: computer2

2: video 1

3: video 2

4: video 3

SR3 at RW 0 4 2

Source 4

0: computer1

1: computer2

2: video 1

3: video 2

4: video 3

SR4 at RW 0 4 3

Startup Logo

0: blank screen

1: default

2: captured

DSU at RW 0 2 1

Tint TNT at RW 96 160 128 1

Tracking MTS at RW def:

-128 def:

+128 auto 1

Unit Total Time On ONL at R 0 21474

83646 0

Vertical Keystone DKC at RW 38 218 128 1

Vertical Position VPS at RW if

def<

128:

else:

def

-128

def<

128:

defx2

else:

def

+128

auto 1

Video Standard

0: Auto

1: NTSC

2: PAL

3: SECAM

VSU at RW 0 3 0

Volume VOL at RW 0 32 16 1

Andere Handbücher für IN42

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere InFocus Projektor Handbücher

InFocus

InFocus LP290 Bedienungsanleitung

InFocus

InFocus LP130 Bedienungsanleitung

InFocus

InFocus LP 750 LiteMount Betriebsanleitung

InFocus

InFocus LP930 Bedienungsanleitung

InFocus

InFocus LP 650 Administratorhandbuch

InFocus

InFocus LitePro Bedienungsanleitung

InFocus

InFocus IN1 Bedienungsanleitung

InFocus

InFocus LP335 DRAGONFLY Bedienungsanleitung

InFocus

InFocus LP330 Bedienungsanleitung

InFocus

InFocus IN74 Bedienungsanleitung

InFocus

InFocus SP5000 Technisches Datenblatt

InFocus

InFocus SP4805 Bedienungsanleitung

InFocus

InFocus SP7210 Bedienungsanleitung

InFocus

InFocus IN8606HD Bedienungsanleitung

InFocus

InFocus Projectors Bedienungsanleitung

InFocus

InFocus IN3124 Bedienungsanleitung

InFocus

InFocus IN5122 Bedienungsanleitung

InFocus

InFocus LP70+ Bedienungsanleitung

InFocus

InFocus in122 Bedienungsanleitung

InFocus

InFocus W1100 Bedienungsanleitung

InFocus

InFocus LP280 Bedienungsanleitung

InFocus

InFocus SP8600 series Bedienungsanleitung

InFocus

InFocus Work Big IN32 Leitfaden

InFocus

InFocus Proxima DP6850 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung