InFocus IN5542 Bedienungsanleitung

ENGLISH

Projector

IN5542/IN5542c/IN5544/IN5544c

User's Manual (concise)

Thank you for purchasing this product.

Before using this product, please read through this manual in order to use this product

well and safely.

NOTE

* In this manual, unless any comments are accompanied, “the manuals” means all the

documents provided with this product, and “the product” means this projector and all the

accessories came with the projector.

WARNING

● Read all the manuals before using the product. Keep the manuals in a safe place for

future reference.

● Heed all warnings and cautions in the manuals and on the product.

● Follow all the instructions in the manuals and on the product.

Contents

1. First of all............................................2

1.1 Entries and graphical symbols .............. 2

1.2 Important safety instructions................. 2

1.3 Regulatory notices................................. 3

2. Checking the contents of package ....5

3. Attaching the lens unit.......................5

4. Placing the projector..........................6

4.1 Installation environment........................ 6

4.2 Projection style...................................... 6

4.3 Projection distance ................................ 7

4.4 Placement .............................................. 8

4.5 Supplementary anti-theft means .....8

5. Connecting with your devices ...........9

6. Connecting to a power supply.........12

7. Preparing the remote control..........13

7.1 Putting the batteries............................. 13

7.2 Transmitting condition ........................ 14

7.3 Laser pointer........................................ 14

8. Turning the projector on/off............15

8.1 Turning on ........................................... 15

8.2 Turning off .......................................... 15

9. Projecting images .............................16

9.1 Displaying and switching the image ... 16

9.2 Focusing the image ............................. 16

9.3 Zooming the image ............................. 16

9.4 Adjusting the projection position ........ 17

9.5 Selecting an aspect ratio...................... 17

9.6 Correcting the keystone distortion ...... 17

9.7 Hiding the projection image................ 18

9.8 Temporarily blanking the display........ 18

10. Maintenance ...................................19

10.1 Lamp unit .......................................... 19

10.2 Filter unit........................................... 21

10.3 Internal clock battery......................... 22

10.4 Others ................................................ 22

11. Using the CD manual .....................23

12. Specications ..................................24

13. Troubleshooting

- Warranty and after service .......26

 

QR82691

1. First of all

1.1 Entries and graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the product as

follows, for safety purpose. Please know their meanings beforehand, and heed them.

WARNING This entry warns of a risk of serious personal injury or even death.

CAUTION This entry warns of a risk of personal injury or physical damage.

NOTICE This entry notices of fear of causing trouble.

1.2 Important safety instruction

The following instructions are important to safely use the product. Always follow them

when handling the product.

WARNING

● Never use the product in or after an abnormality (ex. the projector smokes, smells

strange, has liquid or an object inside, or is broken, etc.) If an abnormality should

occur, unplug the projector immediately.

● Keep the product away from children and pets.

● Do not use the product when there is the possibility of thunder or lightening.

● Unplug the projector from the power outlet if the projector is not used for an extended

period of time.

● Do not connect the projector to a power supply when a lens unit is not attached to it.

● Do not open or remove any portion of the product, unless the manuals direct it. For

internal maintenance, leave it to your dealer or their service personnel.

● Use only the accessories specified or recommended by the manufacturer.

● Do not modify the projector or its accessories.

● Do not let liquid or other items enter inside the projector.

● Do not let the product get wet.

● Do not shock or apply pressure to this product.

- Do not place the product on an unstable surface such as an uneven surface or leaning

table.

- Do not place the product where it is unstable. Place the projector so that it (even the

lens part installed) does not protrude from the surface where the projector is placed

on.

- Always move the projector with two or more people. Place your

hands in the indented handles on the bottom of the projector

when carrying the projector.

- Remove all the attachments including the power cord and

cables, from the projector when carrying the projector.

- Do not lengthen the elevator feet beyond 30 mm.

● Do not look into the lens and the openings on the projector, while the lamp is on.

● Do not approach the lamp cover or exhaust vents while the projection lamp is on or

just after the lamp is turned off since they can be too hot.

● Do not apply the laser beam of the remote control to anything except the screen.

Indented handles

ENGLISH

1.3 Regulatory notices

About Electro-Magnetic Interference

WARNING :

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

In Canada

NOTICE: This Class A digital apparatus complies with Canadian ICES-003.

These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to case harmful interference in which case the user will be required to correct the

interference at his own expense.

Some cables have to be used with a ferrite core set. Use the accessory cable or a

designated type cable for the connection. For cables that have a core only at one end,

connect the ferrite core to the projector.

CAUTION: Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

1.3 Regulatory notices (continued)

About Waste Electrical and Electronic Equipment

The mark is in compliance with the Waste Electrical and Electronic

Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment

including any spent or discarded batteries or accumulators as unsorted

municipal waste, but use the return and collection systems available.

If the batteries or accumulators included with this equipment, display

the chemical symbol Hg, Cd, or Pb, then it means that the battery has a

heavy metal content of more than 0.0005% Mercury or more than, 0.002%

Cadmium, or more than 0.004% Lead.

ENGLISH

2. Checking the contents of package

Soon after purchasing this product, check that all the following items are included in the

package. If any items are missing, contact your dealer immediately.

(1) Projector

(2) Lens adapter

(3) Hexagon wrench

(for installation of the optional lens unit)

(4) Power cord

(5) Computer cable

(6) Remote control (batteries not included)

(7) User documentation

NOTE

* This product is supplied without a lens unit, so that you can choose from a range of

lenses ( 24) that can meet your requirements. Ask your dealer about purchasing one

or more lenses with this product.

* Additional accessories or services may be required for your application. We recommend

consulting your dealer beforehand.

CAUTION

● Keep the original packing materials, and use them correctly when transporting or

storing the product.

3. Attaching the lens unit

Ask your dealer to help you with lens installation. Removing and attaching the lens unit

should only be accomplished by authorized service personnel.

WARNING

● Only use the lens unit specified by the manufacturer.

● Removing and attaching the lens unit should only be accomplished by authorized

service personnel.

● Read and keep the user’s manual of the lens unit.

● Be extremely cautious and do not drop or hit the lens against anything.

● Do not transport the projector with the lens attached.

CAUTION

● Keep the original packing materials for the lens unit, and use them correctly when

transporting or storing the lens unit.

NOTICE

● Do not touch the lens surface directly.

● Keep the dust protector of the projector, and use it when no lens unit is attached to the

projector.

BLANK LASER

FREEZE

LASER

INDICATOR

DIGITAL

STANDBY/ON COMPUTER

LENSSHIFT

KEYSTONE

ID3

ID4

ID2

ID1

VIDEO

AUTO

ASPECT

RESET

MAGNIFY

OFF

ENTER

FOCUS

POSITION

PbyP

ZOOM

MYBUTTON

MYSOURCE

SHUTTER

(1)

(4)

(7)

(5)

(2)

(3)

(6)

4. Placing the projector

Read this chapter through rst. Then install the projector into place.

4.1 Installation environment

This product must be installed in a stable, cool and airy location. Check your installation

environment in accordance with the following.

WARNING

● Do not place the product on an unstable surface surface such as an uneven, tilted, or

vibrating location.

● Do not place the product near water - for example, near a bathtub, washbowl, kitchen

sink, or laundry tub; in a wet basement, near a swimming pool, beach; or outdoors.

CAUTION

● Do not place the product in a dusty, smoky, or humid place - for example, in a

passageway, in a smoking space, in a kitchen, or outdoors.

● Do not place the product near heat sources - for example, radiators, heat registers,

stoves, or other product (including amplifiers) that produces heat.

● Do not place this product in a magnetic field.

NOTICE

● Do not place the product in a place where radio interference may be caused.

● Do not place the projector in a place where any strong light hit the remote sensors.

4.2 Projection style

Choose the projection style suitable to your use, referring to the illustration below.

(2) Ceiling mount (suspended from a ceiling)

(1) Standard style (placed on a table)

NOTE

* When installing the projector in a special situation such as a ceiling mount, specific

mounting accessories ( 24) and service may be required. Before installing the

projector, consult your dealer about your installation.

WARNING

● Consult with your dealer about installation beforehand.

● Use only the mounting accessories the manufacturer specified, and leave installation

and removal of the projector with the mounting accessories to the service personnel.

● Read and keep the mounting accessory’s user manuals used.

ENGLISH

4.3 Projection distance

Refer to the following to arrange the projector and your screen. The values shown in the

following table were calculated for the model IN5542/IN5542c with the standard lens unit

LENS-068. See the lens unit user’s manual for your specific situation. The values differ

for every combination of the projector and the lens unit.

* The values shown in the table are calculated for full size screen 1024 x 768.

(a) Screens size (diagonal)

(b) Projection distance (±10%)

(a) Screen

size

[inch (m)]

4 : 3 screen 16 : 9 screen

(b) Projection distance

[m (inch)]

[cm (inch)]

(b) Projection distance

[m (inch)]

[cm (inch)]

min. max. down up min. max. down up

40 (1.0) 1.7 (66) 2.3 (89)

-23 (-9)

84 (33) 1.3 (53) 1.8 (72) -33 (-13) 83 (33)

60 (1.5) 2.6 (103) 3.5 (136)

-34 (-13) 125 (49)

2.1 (83) 2.8 (110) -49 (-19) 124 (49)

70 (1.8) 3.1 (121) 4.0 (159)

-40 (-16)

146 (58) 2.5 (98) 3.3 (129) -58 (-23) 145 (57)

80 (2.0) 3.5 (139) 4.6 (183)

-45 (-18)

167 (66) 2.9 (112) 3.8 (148) -66 (-26) 165 (65)

90 (2.3) 4.0 (157) 5.2 (206)

-51 (-20)

188 (74) 3.2 (127) 4.3 (168) -74 (-29) 186 (73)

100 (2.5) 4.4 (175) 5.8 (230)

-56 (-22)

209 (82) 3.6 (142) 4.7 (187) -82 (-32) 207 (81)

120 (3.0) 5.4 (211) 7.0 (277)

-68 (-27)

251 (99) 4.4 (172) 5.7 (225) -99 (-39) 248 (98)

150 (3.8) 6.7 (266) 8.8 (347)

-85 (-33)

313 (123) 5.5 (216) 7.2 (283) -123 (-49) 310 (122)

200 (5.1) 9.0 (356) 11.8 (464)

-113 (-44)

418 (164) 7.4 (290) 9.6 (379) -164 (-65) 414 (163)

250 (6.4) 11.3 (447) 14.8 (582)

-141 (-56)

522 (206) 9.2 (364) 12.0 (474) -206 (-81) 517 (204)

300 (7.6) 13.6 (537) 17.8 (699)

-169 (-67)

627 (247) 11.1 (438) 14.5 (570) -247 (-97) 620 (244)

350 (8.9) 15.9 (628) 20.7 (816)

-198 (-78)

731 (288) 13.0 (512) 16.9 (666) -288 (-113) 724 (285)

400 (10.2) 18.2 (718) 23.7 (934)

-226 (-89)

835 (329) 14.9 (586) 19.4 (762) -329 (-130) 827 (326)

500 (12.7) 22.8 (899) 29.7 (1168)

-282 (-111)

1044 (411) 18.6 (734) 24.2 (954) -411 (-162) 1034 (407)

600 (15.2) 27.4 (1081) 35.6 (1403)

-339 (-133)

1253 (493) 22.4 (882) 29.1 (1145) -493 (-194) 1241 (488)

700 (17.8) 32.0 (1262) 41.6 (1638)

-395 (-156)

1462 (576) 26.2 (1030) 34.0 (1337) -576 (-227) 1447 (570)

NOTICE

● Do not use a polarized screen, since it can cause a red image.

Projector top

Projector bottom

(Installation side)

(a)

(b)

4.4 Placement

Heed the following and install the projector in accordance with the preceding paragraph

4.3.

WARNING

● Keep the projector away from anything that could catch fire.

● Do not block or cover the openings on the projector, and keep sufficient space for

ventilation around the projector.

- Do not use the projector on a cushioned surface such a rug, a carpet or bedding.

- Keep the projector away from light-weight materials such as a piece of paper that can

stick to the intake holes.

● Do not use the projector on an unstable surface surface such as a cart.

● Place the projector so that nothing enters inside of the projector.

- Keep the projector away from small items such as paperclips that can fall into the

inside.

- Keep the projector away from any liquids that can spill or leak into the product.

CAUTION

● Keep the projector away from anything that is heat conductive such as metal.

- Do not use the projector on a metallic table.

● Keep the projector away from anything that is susceptible to heat such as some types

of plastics.

NOTICE

● Place the projector so that there is nothing that blocks the projection light to the

screen.

● Avoid exposing the remote sensor directly to strong light.

4.5 Supplementary anti-theft means

This projector has a security bar for a commercial anti-theft

chain or wire up to 10 mm in diameter, and also the security

slot for the Kensington lock.

For details, see your security tool manual.

NOTE

* These will not prevent theft, but will help prevent against

theft.

WARNING

● Do not use the security slot to prevent the projector from falling, since this is not what

it is designed for.

CAUTION

● Do not place the anti-theft chain or wire near the projector’s exhaust vents, since the

chain or wire heated by the hot exhaust may cause burns.

ENGLISH

5. Connecting with your devices

Before connecting the projector to your devices, check the device manual to ensure

that the device is compatible with this projector and to check what is required for the

connection.

Consult your dealer when the required accessory did not come with the product or the

accessory is damaged. It may be regulated under some standard.

After making sure that the projector and the devices are turned off, perform the

connection, according to the following instructions. Refer to the illustrations on

subsequent pages.

NOTE

* For this product, the optional cable cover is available for purchase. To place an order for

it, please tell your dealer the part name of it. ( 24)

WARNING

● Use only the accessories specified or recommended by manufacturer. Do not modify

the projector or its accessories.

● Read and keep the accessory’s user manual.

● Do not connect or disconnect the projector with devices while they are connected to a

power supply except when directed by the device manuals.

CAUTION

● Some connecting cables may have to have a specific length, or a ferrite core at the

end to connect to the projector, under the regulation of electro-magnetic interference.

When a ferrite core is attached to the specified cable only at one end, connect to the

end with the ferrite core to the projector.

● Be careful not to connect a cable into the wrong port or the wrong way.

● Be careful not to damage the cables. Route the cables so they will not be stepped on or

pinched.

NOTICE

● Do not turn your device on prior to the projector, except when directed by the device

manuals.

HDMI REMOTE

CONTROL

LAN

DVI-D

CONTROL IN CONTROL OUT

OUT

S-VIDEO

VIDEO 1

COMPUTER IN1 COMPUTER IN2

MONITOR

OUT

BNC

VIDEO 2

R/Cr/Pr G/Y B/Cb/Pb H V

Cb/Pb

Cr/Pr

RS-232C RGB OUT RGB OUT RGB OUT

LAN

DVI-D

5. Connecting with your devices (continued)

Example of connecting with VCR or DVD players

Example of connecting with computers

Digital signal input

Control from the computer

Video signal input

Computer signal input

CAUTION

● For safety, do not connect

the LAN port to any network

that might have excessive

voltage.

HDMI REMOTE

CONTROL

LAN

DVI-D

CONTROL IN CONTROL OUT

OUT

S-VIDEO

VIDEO 1

COMPUTER IN1 COMPUTER IN2

MONITOR

OUT

BNC

VIDEO 2

R/Cr/Pr G/Y B/Cb/Pb H V

Cb/Pb

Cr/Pr

HDMI

S-VIDEO

OUT VIDEO

OUT

COMPONENT

Y Cb/Pb Cr/Pr

VIDEO

OUT

Andere Handbücher für IN5542

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere InFocus Projektor Handbücher

InFocus

InFocus LP 425 LiteMount Bedienungsanleitung

InFocus

InFocus LP 250 Bedienungsanleitung

InFocus

InFocus ASK Proxima C170 Bedienungsanleitung

InFocus

InFocus Learn Big XS1 Bedienungsanleitung

InFocus

InFocus LP280 Bedienungsanleitung

InFocus

InFocus X1 Konfigurationshandbuch

InFocus

InFocus Projector Bedienungsanleitung

InFocus

InFocus IN5302 Bedienungsanleitung

InFocus

InFocus IN5100 series Bedienungsanleitung

InFocus

InFocus LP 725 Bedienungsanleitung

InFocus

InFocus SP777 Gebrauchs- und Pflegehandbuch

InFocus

InFocus LP 600 Bedienungsanleitung

InFocus

InFocus X2 multi-use perfomance Bedienungsanleitung

InFocus

InFocus LP690 Gebrauchs- und Wartungshandbuch

InFocus

InFocus LP920 Bedienungsanleitung

InFocus

InFocus IN3114 Bedienungsanleitung

InFocus

InFocus X3 Bedienungsanleitung

InFocus

InFocus IN119HDxa Bedienungsanleitung

InFocus

InFocus IN118HDSTa Bedienungsanleitung

InFocus

InFocus IN5122 Bedienungsanleitung

InFocus

InFocus IN5132c Bedienungsanleitung

InFocus

InFocus IN36 Bedienungsanleitung

InFocus

InFocus ScreenPlay 7205 Bedienungsanleitung

InFocus

InFocus NLMP19005 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung