InFocus LP 225 Montageanleitung

LP225 RS-232 Command Values

Communication Configuration

To control one of the above noted projectors from an RS-232 control system, connect the serial cable or a null modem cable and

the InFocus RS-232 Adapter (SP-CWRS232) and set the control system serial port settings to match the following communication

configuration*:

RS-232 Port Settings

Setting Value

Bits per second 19,200

Data bits 8

Parity None

Stop bits 1

Flow control None

Emulation VT100

RS-232 Connection for LP225

The RS-232/serial connection for these projectors is located on the PC side of the CableWizard II connection hub. Use the serial

cable (IFS part # 210-0107-xx) to connect the CableWizard II to the serial port of the computer source.

Note: CableWizard3(p/n SP-CW3) does not support RS-232. You must Use CableWizard II (p/n SP-CW2) and the InFocus

serial cable.

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read request

(indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

A read request example:

(AAA?) where

( starts the command

AAA denotes the command

? denotes the read request

) ends the command

A read command returns the range and the current setting, for example:

Read Command Examples

Function Command Response

Brightness (BRT?) (0-22, 10)

Volume (VOL?) (0-80, 0)

Lamp Hours (LMP?) (0-9999, 421)

A write request example:

(AAA####) where

( starts the command

AAA denotes the command

#### denotes the value to be written

(leading zeros not necessary)

) ends the command

Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is

automatically set to the maximum number for that function. If a command is received that is not understood, a "?" is returned. With

absolute settings, "0" is off, 1-9999 is on. The one exception is the Power command, where 0 is off and 1 is on.

To assure the projector can process a command, wait 3 seconds before entering the next command.

Write Command Examples

Function Command Response

Brightness (BRT10) Sets the brightness

to 10

Freeze (FRZ1) or

(FRZ8888) Freezes the display

Power (PWR0) Turns power off

Power (PWR1) Turns power on

Error Conditions

Not all commands are supported for all projectors. If an unsupported command is issued, the command will be ignored. If a

command is received that is not understood, a ‘?’ character will be returned indicating the command was not understood.

Limitations

The CLI cannot respond to commands coming in at a high-rate. Therefore, a delay must occur between commands to ensure that

the command gets properly executed. To assure the projector can process a command, wait 3 seconds before entering the next

command.

Note: Specified commands and values apply to the LP225 with version 1.10 software or higher. The version number of the

software is the first number listed in the upper right corner of the on-screen menu. Command values for LP225s with earlier

software versions may vary. If your LP225 does not have version 1.10 software or higher, go to the Software/Downloads page to

download and upgrade the projector software.

For absolute command value ranges of 0 - 1, 0 = "Off" and 1-9999 = "On" unless otherwise noted.

Range

Data Source

(Computer) Video Source

Function Command

Min-Max, Initial Value Min-Max, Initial Value

Power (write only) ("PWR") N/A N/A

Brightness ("BRT") 0-32,16 0-32,16 or 14

Tint ("TNT") 0-32,16 0-32,16

Contrast ("CON") 0-32,16 0-32,18 or 16

ColorTemp ("TMP") N/A N/A

Saturation ("CLR") N/A 0-32,16

Optimize ("OPT") N/A N/A

VideoFmt ("VSU") N/A 0-6,0

Volume ("VOL") 0-80,40 0-80,40

Balance ("BAL") 0-31,16 0-31,16

Treble ("TRB") 0-14,7 0-14,7

Bass ("BAS") 0-14,7 0-14,7

Fade ("FAD") 0-31,16 0-31,16

Ambiance ("AMB") 0-37,19 0-37,19

Mute ("MTE") 0-1,0 0-1,0

Manual Tracking ("MTS") 0-63,32* N/A

Manual Sync ("MSS") 0-19,10* N/A

Horiz Position ("HPS") 0-63,32* N/A

Vertical Position ("VPS") 0-63,32* N/A

Auto Image ("AIM") 0-1,1 N/A

Resize ("ARZ") 0-1,1 0-1,1

Freeze ("FRZ") 0-1,0 0-1,0

Language ("LAN") 0-3,0 0-3,0

Ceiling ("CEL") 0-1,0 0-1,0

Rear Project ("REA") 0-1,0 0-1,0

Reset ("RST") 0-1,0 0-1,0

Auto Source ("ASC") 0-1,0 0-1,0

Default Source ("DSC") 0-1,0 0-1,0

Blank Screen ("BSC") 0-1,0 0-1,0

Menu Position ("MPS") 0-4,0 0-4,0

Standby Time ("SBT") N/A N/A

Display Messages ("DMG") N/A N/A

Display Startup Screen ("DSU") N/A N/A

Standby Mode ("STB") 0-1,0 0-1,0

Source ("SRC") 0-1,0

0 = computer

1 = video

0-1,0

0 = computer

1 = video

Bulb Clock (read only) ("LMP") 0-9999,0 0-9999,0

*Software dynamically changes range based on the signal received.

Inhaltsverzeichnis

Andere InFocus Projektor Handbücher

InFocus

InFocus LP 815 Bedienungsanleitung

InFocus

InFocus Work Big IN2102 Bedienungsanleitung

InFocus

InFocus IN24 Handbuch

InFocus

InFocus LP280 Bedienungsanleitung

InFocus

InFocus IN1501 Bedienungsanleitung

InFocus

InFocus in2100 Series Bedienungsanleitung

InFocus

InFocus SP7205 Bedienungsanleitung

InFocus

InFocus IN114x Bedienungsanleitung

InFocus

InFocus Learn Big IN3102 Bedienungsanleitung

InFocus

InFocus IN5122 Montage- und Wartungsanleitung

InFocus

InFocus ScreenPlay 4805 Bedienungsanleitung

InFocus

InFocus proxima DP9295 Bedienungsanleitung

InFocus

InFocus Projectors Bedienungsanleitung

InFocus

InFocus LP330 Bedienungsanleitung

InFocus

InFocus LP810 Gebrauchs- und Pflegehandbuch

InFocus

InFocus SP4800 Systemhandbuch

InFocus

InFocus IN112a Bedienungsanleitung

InFocus

InFocus LP280 Bedienungsanleitung

InFocus

InFocus Projector Bedienungsanleitung

InFocus

InFocus LP720 Leitfaden

InFocus

InFocus in2100 Series Bedienungsanleitung

InFocus

InFocus X1 Bedienungsanleitung

InFocus

InFocus LP1200 Bedienungsanleitung

InFocus

InFocus Quantum Laser Core Series Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung