InFocus SP-LAMP-100 Leitfaden

Lamp Module Replacement Instructions: SP-LAMP-100

1) Turn off the projector and unplug the power cord. Wait 60 minutes to allow the projector to

cool thoroughly.

IN119HDxa

2) Replacing the Lamp

NOTES:

Always use the InFocus lamp module designed for your projector model. Using the wrong lamp module may cause premature lamp failure and possible

damage to the projector.

SP-LAMP-100: IN119HDxa

You can order new lamps from www.infocus.com (in select areas), your retailer or your dealer. Only genuine InFocus lamps are tested for use in this

projector. Use of non InFocus lamps may cause electrical shock and fire, and may void the projector warranty. InFocus is not liable for the performance,

safety or certification of any other lamps.

WARNINGS:

 The projector uses a high-pressure mercury glass lamp. The lamp may fail prematurely, or it may rupture with a popping sound if jolted, scratched,

or handled while hot. The risk of lamp failure or rupture also increases as the lamp age increases; please replace the lamp when you see the “Re-

place Lamp” message.

 To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp.

 Unplug the power cord before replacing the lamp.

 Do not drop the lamp module. The glass may shatter and cause injury.

 Do not touch the glass surface of the lamp module. Fingerprints can obscure projection sharpness and may cause the glass to shatter.

 Be extremely careful when removing the lamp module. In the unlikely event that the lamp ruptures, small glass fragments may be generated. The

lamp module is designed to contain most of these fragments, but use caution when removing it.

 Before replacing a ruptured lamp, clean the lamp compartment and dispose of cleaning materials. Wash hands after lamp replacement.

 When replacing the lamp while the projector is ceiling-mounted, wear protective eyewear to prevent eye injury.

 Hg-Lamp contains mercury. Manage with accordance with local disposal laws. See www.lamprecycle.org

 The screws on the lamp cover and

the lamp cannot be removed.

 The projector cannot be turned

on if

the lamp cover has not been

placed

back on the projector.

 Do not touch the glass area of the

lamp. Hand oil can cause the lamp

to shatter. Use a dry cloth to clean

the lamp module if it was acci-

dentally touched.

3) Lamp Replacement Procedure

1. Switch off the power to the projector by pressing the

button.

2. Allow the projector to cool down for at least 30 minutes.

3. Disconnect the power cord.

4. Unscrew the one screw on the cover. 1

5. Lift up and remove the cover. 2

6. Lift up the lamp handle. 3

7. Press on the both sides then lift up and remove the lamp cord. 4

8. Unscrew the one screw on the lamp module. 5

9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully.

To replace the lamp module, reverse the previous steps.

10. Turn on the projector and reset the lamp timer.

Lamp Reset: (i) Press “Menu” → (ii) Select “OPTIONS” → (iii) Select

“Lamp Settings” → (iv) Select “Lamp Reset” → (v) Select “Yes”.

36.7C003G001-A

009-1775-00

Inhaltsverzeichnis

Andere InFocus Projektor Handbücher

InFocus

InFocus LP330 Bedienungsanleitung

InFocus

InFocus in2100 Series Bedienungsanleitung

InFocus

InFocus LP260 Gebrauchsanweisung

InFocus

InFocus ScreenPlay 4805 Bedienungsanleitung

InFocus

InFocus ScreenPlay 4800 Bedienungsanleitung

InFocus

InFocus IN24 Bedienungsanleitung

InFocus

InFocus LP 850 Bedienungsanleitung

InFocus

InFocus IN5535 Bedienungsanleitung

InFocus

InFocus ScreenPlay 4800 Bedienungsanleitung

InFocus

InFocus IN3134a Bedienungsanleitung

InFocus

InFocus IN5132c Bedienungsanleitung

InFocus

InFocus LP 250 Bedienungsanleitung

InFocus

InFocus LP720 Bedienungsanleitung

InFocus

InFocus LP 725 Bedienungsanleitung

InFocus

InFocus LP 750 LiteMount Bedienungsanleitung

InFocus

InFocus IN1501 Bedienungsanleitung

InFocus

InFocus LS110 Bedienungsanleitung

InFocus

InFocus X3 Bedienungsanleitung

InFocus

InFocus in3138hd Bedienungsanleitung

InFocus

InFocus Work Big IN1100 Bedienungsanleitung

InFocus

InFocus LP340 Betriebsanleitung

InFocus

InFocus X1 Bedienungsanleitung

InFocus

InFocus LP260 Referenzhandbuch

InFocus

InFocus LP210 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung