Ingenico IWL250 3G Gebrauchsanweisung

Purchase

1. Pressing the green button switches the terminal on.

2. The <F> button opens the main menu.

3. Pressing <1> opens the transaction menu. 1: Transactions

4. Push the <1> button. “Purchase” is activated. 1: Purchase

5. Enter the amount and confirm with .

When you press 1, the amount is 1 EURO.

Amounts less than “1” have to be preceded by the decimal mark, comma via the “.” key.

6. Depending on the card type, it must be inserted in the chip card reader, held up to the

contactless reader, swipped through the magnetic swipe reader or entered manually after

pressing F4 for PAN key entry.

7. The amount is displayed for the customer to read. When using a card with an associated

PIN, the customer is instructed to enter the PIN code (4 to 6 digits) and confirm

with . When using a card without a PIN, only the amount must be confirmed.

Generally, customers do not need to do anything further for a contactless payment of a

small amount. The transaction can be interrupted by pressing .

Timeout: If a transaction is not concluded within 30 seconds, the process is aborted.

<PIN>

8. Payments are processed and, when appropriate, authorised online.

Chip cards: The card must remain inserted in the chip reader during the transaction

until the instructions appear to remove the card.

9. Receipt is printed out. Please follow the terminal’s instructions: If the customer’s

signature is necessary, please request and check the customer’s signature.

10. To print a copy of the receipt: Push the <1> button.

To not print a copy of the receipt: Push the <2> button.

If no button is pushed, a copy is automatically printed after 30 seconds.

1: Copy

2: No copy

Quick user guide for:

Ingenico iWL250 3G

Ingenico iWL250 WIFI

Ingenico ICT220+IPP320

Reversal (Cancellation)

With this function, the last transaction that was carried out is cancelled.

1. Pressing the green button switches the terminal on.

2. The <F> button opens the main menu.

3. Pressing <1> opens the transaction menu. 1: Transactions

4. Push the <3> button. “Reversal” is activated. 3: Reversal

5. Enter the terminal’s password and confirm with .

(For the password, see the configuration sheet.)

6. The amount of the previous transaction is displayed, and confirm it with <OK>.

7. Reversal is processed and, when appropriate, authorised online.

8. Receipt is printed out.

9. To print a copy of the receipt: Push the <1> button.

To not print a copy of the receipt: Push the <2> button.

If no button is pushed, a copy is automatically printed after 10 seconds.

1: Copy

2: No copy

Credit (Refund)

If a transaction can no longer be cancelled, a credit can be issued.

1. Pressing the green button switches the terminal on.

2. The <F> button opens the main menu.

3. Pressing <1> opens the transaction menu. 1: Transactions

4. Push the <4> button. “Credit” is activated. 4: Credit

5. Enter the terminal’s password and confirm with .<Password>

6. Enter the amount and confirm with .

The amount is separated (e.g. euros/cents) with a period.

Amounts less than “1” are registered with a “0.” at the beginning.

7. Only if the DCC function is activated: Enter the date of the original transaction and

confirm with .

<Date>

8. Depending on the card type, it must be inserted in the chip card reader, held up to the

contactless reader or swiped through the magnetic stripe reader.

9. The cashier signs the receipt as a confirmation.

Reservation

In addition to the transactions described above, terminal allows dedicated transaction type for

amount reservation used e.g. by hotel, rental car, ight ticket, other check in services etc.

The operation of these additional functions corresponds to the same logic as that used for the

standard functions.

Terminal allows following reservation transactions:

A<5> Reservation

Transaction type to book amount on the Cardholder card.

B<6> Reservation completion

Transaction type to book a Reservation amount that was previously made.

The entire amount or even just a partial amount can be booked.

C<0> <3> Reservation adjustment

To increase the amount of the reservation.

How to process reservation transactions:

AReservation

1. Select the transaction type <5> Reservation 5: Reservation

2. Enter the reservation amount. <Reservation amount>

3. Use the card at the terminal or press F4 key to enter manually card PAN,

expiry date and CVV.

uKeep the terminal receipt, transaction reference number is needed to complete transaction.

BReservation completion

1. Select the booking type <6> “Purchase reserv.” 6: Purchase reserv.

2. Enter the final transaction amount. <Transaction amount>

3. Enter the original reservation amount. <Reservation amount>

4. Enter the transaction reference number from original reservation receipt. <Reference number>

5. The card does not have to be scanned at the terminal.

uAfter this transaction final amount is booked.

CReservation adjustment

1. Under <0> Other transactions, select the booking type <3> Reserv adjustment 3: Reserv adjustment

2. Enter the new reservation amount by which the underlying reservation is to be increased.

This amount is then authorized.

<New reservation

amount>

3. Enter the transaction reference number from original reservation receipt. <Reference number>

uKeep the terminal voucher (original transaction ref number is required), this is needed again.

Additional reference text

The terminal supports additional functionality to transport additional merchant data (e.g. a bill/

invoice number, a sale reference etc.) with the transaction data. This additional merchant data is

returned to the merchant in the reimbursement notice of this transaction.

Up to 50 alphanumeric characters can be entered by the merchant manually on the terminal.

Cashier handling:

1. Push <1> “Transactions” and <1> “Payment”

2. Enter amount and confirm with .

The amount is separated (e.g. euros/cents) with a comma.

Amounts less than “1” have to be preceded by the decimal mark, comma via the “.” key.

3.A Screen prompt to enter “Transaction ref text”.

To process without text, leave empty and press .

3.B Screen prompt to enter “Transaction ref text”.

After entering whole text confirm with .

To access all characters, please press the same button multiple times.

3. Depending on the card type, it must be inserted in the chip card reader, held up to the

contactless reader, swipped through the magnetic swipe reader or entered manually after

pressing F4 for PAN key entry.

Functions is activated or deactivated, depending on the contract. Once activated Transaction

reference screen appear on terminal for all Purchase transactions.

Multiple account

The functionality Multi account enables payments to different Merchant accounts, initiated by

multiple merchants sharing one terminal. A merchant may add an account index to a transaction,

based on this account index a specic, precongured merchant account (settlement account) will

be triggered during billing processing.

Account index is limited to 0 to 9 values.

Cashier handling:

1. Push <1> “Transactions” and <1> “Payment”

2. Enter amount and confirm with .

The amount is separated (e.g. euros/cents) with a comma.

Amounts less than “1” are registered with a “0,” at the beginning.

3.A Screen prompt to enter “Account index”.

To process without text, leave empty and press .

3.B Screen prompt to enter “Account index”.

After entering number confirm with .

3. Depending on the card type, it must be inserted in the chip card reader, held up to the

contactless reader, swipped through the magnetic swipe reader or entered manually after

pressing F4 for PAN key entry.

Functions is activated or deactivated, depending on the contract. Once activated Transaction

reference screen appear on terminal for all Purchase transactions.

Daily closing

During the daily closing, all processed transactions are delivered for crediting and closed. After the

daily closing, all amounts are credited. A daily closing should be performed at least once a day –

the best time is after the store has closed. The daily and shift counters are set to “0”. During the shift

handover, you can determine which transactions were carried out during this period (shift). The

shift handover is provided strictly for information purposes and does not replace a daily closure.

Tips

– Software updates take place at night and only when shifts are closed.

Therefore, do not open a new shift in the evening after the daily closing is complete.

– After an “end of shift”, reversals can no longer be carried out.

Pressing the green button switches the terminal on.

The button opens the main menu.

Select Function <2> Balances and afterwards <3> Daily closing. <2> <3>

Special button

Special button with “please return terminal”: Merchant notications are not displayed automatically

in customer mode. When the merchant presses the function button on the top left extended

messages are displayed to the merchant.

Enquiries and settings

Enquiries (journal) Settings

Use the buttons to get to the terminal’s

main menu. Select the function <3> Queries.

The following options are available:

– Shift counter (current status of the present shift)

– Daily counter (current status since the last daily

settlement)

– Trx Log Info (current status of transactions following the

last data transmission)

– Print DCC rate (optional)

– Print last ticket

Use the buttons to get to the terminal’s main

menu. Select the function <4> Settings.

Various options are available.

Eco-mode for power saving

Eco-mode allows to save battery life by shortening standby delay time. By default your terminal

is precongured with default standard values for Eco-mode.

You can change Eco-mode setting by pressing the dot button , terminal will display Power

Management screen. You can chose from two options:

Backlight

Parameter setup in seconds. When setup, after e.g 5 seconds terminal display and keyboard

switch off backlighting. As soon as the user presses any button terminal backlighting is back.

Standby

Parameter setup in minutes. When setup, after e.g 1 minute terminal automatically switch power

off. As soon as the user presses any button terminal power is back. Standby is only available on

terminals containing a battery.

110.0372.02 INT_EN_BNPPF/02.2017

Your local point of contact can be found at: www.six-payment-services.com/contact

SIX Payment Services Ltd

Hardturmstrasse 201

P. O. Box

CH-8021 Zurich

SIX Payment Services (Europe) S.A.

10, rue Gabriel Lippmann

5365 Munsbach

Luxembourg

SIX Payment Services (Austria) GmbH

Marxergasse 1B

1030 Vienna

Austria

Further information

Are you looking for detailed information about your payment terminal?

Videos and product yers can be found on our website.

www.six-payment-services.com

Notes about the unit

PLEASE NOTE! SIX carries out software updates at night in order to enable you to

use your payment terminal without interruption during the day. For this reason, your

payment terminal must be left connected to electricity mains during at night with

an internet connection.

Function Description Buttons

Setting up and

activating WLAN

Set up WLAN. <4> <5> <Password>

Setup > password

is requested

Call up the main menu with the buttons. Select <5> for the

Setup function. The following terminal-specific functions can

be carried out. It is possible to reach this menu item only with the

password.

<5> <Password>

Configuration The terminal retrieves the latest configuration parameters. <5> <Password> <1>

Initialisation Individual or all card issuers are reinitialised. <5> <Password> <2>

SW update The terminal loads the latest version of the software.

Caution! Downloading the software can take several minutes.

Never pull out the plug AC adaptor cable.

<5> <Password> <3>

Trm reset This function is available only to SIX technicians and is protected

with a special password.

<5> <Password> <4>

Info The terminal ID and current version of the software are displayed. <5> <Password> <5>

config

The current configuration is printed out.

Note: This detailed printout requires a good deal of paper.

<5> <Password> <6>

Print HW info This function is available only to SIX technicians and is protected

with a special password.

<5> <Password> <8>

System Use this function only if you are requested to do so by SIX hotline. <5> <Password> <9>

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ingenico Zahlungsterminal Handbücher

Ingenico

Ingenico ISMP3- Bedienungsanleitung

Ingenico

Ingenico APOS A8 Bedienungsanleitung

Ingenico

Ingenico iSMP-Companion Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

Ingenico

Ingenico Isc480 Bedienungsanleitung

Ingenico

Ingenico iWL252 Bedienungsanleitung

Ingenico

Ingenico i6550 Bedienungsanleitung

Ingenico

Ingenico Move 5000 Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

Ingenico

Ingenico iCT 200 Series Bedienungsanleitung

Ingenico

Ingenico i3070 Bedienungsanleitung

Ingenico

Ingenico i8550 Bedienungsanleitung

Ingenico

Ingenico PAYZONE iCT250 Bedienungsanleitung

Ingenico

Ingenico IngePay Technisches Datenblatt

Ingenico

Ingenico EFT930G Bedienungsanleitung

Ingenico

Ingenico iCT250E Bedienungsanleitung

Ingenico

Ingenico AXIUM EX6000 Bedienungsanleitung

Ingenico

Ingenico P30 Series Bedienungsanleitung

Ingenico

Ingenico IMP3 Series Bedienungsanleitung

Ingenico

Ingenico PAYZONE iCT250 Bedienungsanleitung

Ingenico

Ingenico iWL 250 series Bedienungsanleitung

Ingenico

Ingenico iWL Series Bedienungsanleitung

Ingenico

Ingenico Self/3000 Bedienungsanleitung

Beliebte Zahlungsterminal Handbücher anderer Marken

PAX

PAX D180SRF Bedienungsanleitung

LinkPoint

LinkPoint AIO Bedienungsanleitung

Moneris

Moneris hispeed 6200 Bedienungsanleitung

Moneris

Moneris iWL220 Bedienungsanleitung

Optimum

Optimum M4230 Bedienungsanleitung

Triton

Triton RL5000 Bedienungsanleitung

Ingenico group

Ingenico group Lane/8000 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Bedienungsanleitung

PAX

PAX S920 Bedienungsanleitung

dejavoo

dejavoo Z Series Bedienungsanleitung

VeriFone

VeriFone VX 520 Series Bedienungsanleitung

Optomany

Optomany axept S900 Bedienungsanleitung

Skyzer

Skyzer iWL252 BLUETOOTH Bedienungsanleitung

Moneris

Moneris iWL220 Bedienungsanleitung

VeriFone

VeriFone HICAPS VX820 Bedienungsanleitung

Magtek

Magtek DYNAPRO Bedienungsanleitung

VeriFone

VeriFone UX401 Bedienungsanleitung

Casio

Casio QT-2000 Bedienungsanleitung

Ingenico iWL250 3G Gebrauchsanweisung

Beliebte Zahlungsterminal Handbücher anderer Marken