InHand VG814 Bedienungsanleitung
InHand VG814 User's Manual V1.2
Declaration
Thank you for choosing our product. Before using the product, read this manual
carefully.
The contents of this manual cannot be copied or reproduced in any form without the
written permission of InHand.
Due to continuous updating, InHand cannot promise that the contents are consistent
with the actual product information and does not assume any disputes caused by the
inconsistency of technical parameters. The information in this document is subject
to change without notice. InHand reserves the right of final change and
interpretation.
©2020 InHand Networks. All rights reserved.
Conventions
Symbol
Indication
>
Indicates a button name, for example,
the OK button.
""
Indicates a window name or menu name,
for example, the pop-up window "New
User".
>>
Separates a multi-level menu. For
example, the multi-level menu File >>
New >> Folder indicates the menu item
"Folder" under the sub-menu "New", which
is under the menu "File".
Reminds readers to be careful. Improper
action may result in loss of data or
device damage.
Notes contain detailed descriptions and
helpful suggestions.
Technical support:
T: +1 (703) 348-2988
43671 Trade Center Place, Suite 100, Dulles, VA 20166
Contents
1Overview 1
2Hardware 2
2.1 Indicator Description 2
2.2 Restoring Default Settings via the Reset Button 3
2.3 Panel interface introduction 4
2.3.1 VG814 railway version 4
3Default Settings 7
4Login and Network Access 9
4.1 Network Access via the Dialup Card 9
4.2 Network Access via Wi-Fi 12
5Network Management 14
5.1 Network 14
5.1.1 Bridge Port 14
5.1.2 VLAN Port 15
5.1.3 ADSL Dialup (PPPoE) 17
5.1.4 Wi-Fi 17
5.1.5 Loopback Port 19
5.1.6 Layer 2 Switch 19
5.2 OBD 20
5.3 VPN Application 23
5.3.1 IPsec 23
5.3.2 GRE 27
5.3.3 L2TP 28
5.3.4 OpenVPN 30
5.3.5 Certificate Management 31
5.4 Services 33
5.4.1 DHCP (Automatic IP Address Allocation) 33
5.4.2 DNS 35
5.4.3 DDNS 36
5.4.4 SMS 37
5.4.5 GPS 38
5.4.6 QoS 41
5.4.7 Traffic Control 42
5.5 Firewall 43
5.5.1 ACL 43
5.5.2 NAT 44
5.5.3 MAC-IP Binding 45
5.6 Routing 46
5.6.1 Static Routing 46
5.6.2 Dynamic Routing 47
5.7 Link Backup 52
5.7.1 SLA 52
5.7.2 Track 52
5.7.3 VRRP 54
5.7.4 Interface Backup 56
5.8 Wizards 59
5.8.1 New Cellular 59
5.8.2 New IPsec Tunnel 59
5.8.3 IPsec Experts' Configuration 60
5.8.4 New L2TPv2 Tunnel 60
5.8.5 New Port Mapping 61
6APP Management 63
6.1.1 APP Status 63
6.1.2 APP Management 63
6.2.1 APP Docker function 65
7Connecting the Gateway to a Cloud Platform 68
8Industrial Ports (Serial Ports) 69
8.1 DTU 69
8.2 IO Ports 72
9System Management 75
9.1 System 75
9.2 System Time 75
9.3 Management Services 77
9.4 User Management 78
9.5 AAA 78
9.5.1 Radius 79
9.5.2 Tacacs+ 80
9.5.3 LDAP 81
9.5.4 AAA Authentication 81
9.6 Configuration Management 82
9.7 SNMP 83
9.7.1 SNMP 83
9.7.2 SnmpTrap (Alarm) 84
9.7.3 SnmpMibs 85
9.8 Alarm 86
9.9 System Logs 87
9.10 System Upgrade 89
9.11 System Reboot 89
10 Diagnostic Tools 91
1 Overview
InHand VG814 is a new-generation 4G in-vehicle gateway oriented at the Internet of
Vehicles (IoV). It provides fast and safe networks for automobiles and transport
service vehicles, meeting the requirements of police vehicles, emergency command
vehicles, engineering vehicles, medical vehicles, and logistics vehicles for fast
mobile networks. It is used with a cloud-based remote vehicle management platform
to provide ubiquitous accessible networks and uninterrupted operation supervision
for logistics management, asset tracking, mobile office, and government security.
Fig. 1 Application case
2 Hardware
2.1 Indicator Description
VG814 Indicator
Status and Definition
System
Steady off --- The device is powered
off.
Steady red --- The system is starting.
Steady blue --- IGT is not correctly
installed.
Blinking green --- The system operates
properly.
Blinking red --- The system is faulty.
Blinking blue --- The system is being
upgraded.
Cellular
Steady off --- The dialup function is
disabled.
Blinking green --- Dialup is in
progress.
Steady green --- Dialup succeeds.
Blinking red --- Dialup fails (no module
or SIM card is detected).
Signal
Steady off --- The current dialup card
has no signal.
Steady red --- The current dialup card
has weak signals (signal strength: ≤9
asu).
Steady blue --- The current dialup card
has moderate signals (signal strength:
10–19 asu).
Steady green --- The current dialup card
has strong signals (signal strength: ≥
20 asu).
GNSS
Steady off --- GNSS is disabled.
Blinking green --- Positioning is in
progress.
Steady green --- Positioning is
completed.
Wi-Fi 2.4G
Used as an AP:
Steady off --- The AP is disabled.
Blinking green --- The AP operates
properly.
Used as a STA:
Steady off --- The STA is disabled, or
no AP is associated.
Steady green --- Connection fails due to
a wrong password after an AP is
associated.
Blinking green --- An AP is associated.
Wi-Fi 5G
Used as an AP:
Steady off --- The AP is disabled.
Blinking blue --- The AP operates
properly.
Used as a STA:
Steady off --- The STA is disabled, or
no AP is associated.
Steady blue --- Connection fails due to
a wrong password after an AP is
associated.
Blinking blue --- An AP is associated.
Inhaltsverzeichnis
Andere InHand Tor Handbücher
InHand
InHand IG502 Bedienungs- und Wartungsanleitung
InHand
InHand IG902-B Bedienungs- und Wartungsanleitung
InHand
InHand InGateway902 Bedienungsanleitung
InHand
InHand IG601 Bedienungsanleitung
InHand
InHand VG710 Bedienungsanleitung
InHand
InHand InGateway974 Gebrauchsanweisung
InHand
InHand InGateway502 Gebrauchsanweisung
InHand
InHand VT200 Series Bedienungsanleitung
InHand
InHand VG710 Bedienungsanleitung
InHand
InHand IG601 Bedienungsanleitung
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
