INIM Electronics SmartLink Advanced Series Montageanleitung

Installation and programming manual

SmartLink Advanced

Telephone dialler

Installation and programming manual

EN 50131-1

EN 50131-10

EN 50136-1

EN 50136-2

EN 50130-4

EN 50130-5

CEB T014

Telephone dialler

Warranty

INIM Electronics s.r.l. (Seller, Our, Us) warrants the original

purchaser that this product shall be free from defects in materials

and workmanship under normal use for a period of 24 months. As

INIM Electronics s.r.l. does not install this product directly, and due

to the possibility that it may be used with other equipment not

approved by Us; INIM Electronics s.r.l. does not warrant against loss

of quality, degradation of performance of this product or actual

damage that results from the use of products, parts or other

replaceable items (such as consumables) that are neither made nor

recommended by INIM Electronics. Seller obligation and liability

under this warranty is expressly limited to repairing or replacing, at

Seller's option, any product not meeting the specifications. In no

event shall INIM Electronics s.r.l. be liable to the purchaser or any

other person for any loss or damage whether direct or indirect or

consequential or incidental, including without limitation, any

damages for lost profits, stolen goods, or claims by any other party

caused by defective products or otherwise arising from the incorrect

or otherwise improper installation or use of this product.

This warranty applies only to defects in parts and workmanship

relating to normal use. It does not cover:

• damage arising from improper maintenance or negligence

• damage caused by fire, flood, wind or lightning

• vandalism

• fair wear and tear

INIM Electronics s.r.l. shall, at its option, repair or replace any

defective products. Improper use, that is, use for purposes other

than those mentioned in this manual will void the warranty. Contact

Our authorized dealer, or visit our website for further information

regarding this warranty.

Limited

warranty

INIM Electronics s.r.l. shall not be liable to the purchaser or any

other person for damage arising from improper storage, handling or

use of this product.

Installation of this Product must be carried out by qualified persons

appointed by INIM Electronics. Installation of this Product must be

carried out in accordance with Our instructions in the product

manual.

The information contained in this document is the sole property of

INIM Electronics s.r.l. No part may be copied without written

authorization from INIM Electronics s.r.l.

Directive

1999/5/CE

(R&TTE)

compliance

Hereby INIM Electronics s.r.l. declares that the SmartLinkAdv/P,

SmartLinkAdv/G and SmartLinkAdv/GP are in compliance with the

essential requirements and other relevant provisions of Directive

1999/5/CE.

The full declarations of conformity of the above-mentioned devices

are available at URL:

www.inim.biz/certifications

Installation and programming manual

Table of

contents

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . 2

Directive 1999/5/CE (R&TTE) compliance . . . . . . . 2

Table of contents. . . . . . . . . . . . . . . . . . . . . . . . 3

About this manual . . . . . . . . . . . . . . . . . . . . . 5

0-1 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

0-2 Graphic conventions . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1 General information . . . . . . . . . . . . . . . . . . . . 6

1-1 Manufacturer's details . . . . . . . . . . . . . . . . . . . . . . . . 6

1-2 Description of the product and various models . . . . . . . 6

1-3 Supplied documentation. . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 2 Device description . . . . . . . . . . . . . . . . . . . . . 9

2-1 Unpacking the device. . . . . . . . . . . . . . . . . . . . . . . . . 9

2-2 Accessory items . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2-3 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . 9

2-4 Signalling from device . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 3 SmartLinkAdv functions . . . . . . . . . . . . . . . . . 13

3-1 Telephone line down management . . . . . . . . . . . . . . . 13

3-2 Input/Output terminals . . . . . . . . . . . . . . . . . . . . . . . 13

3-3 Event activations. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3-4 Dialler function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3-5 Command and Shortcuts . . . . . . . . . . . . . . . . . . . . . . 15

3-6 Remote activation . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3-7 Easyscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3-8 Jamming detector . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4-1 Wall-mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4-2 Connecting to the mains power supply. . . . . . . . . . . . . 18

4-3 Mounting the antenna . . . . . . . . . . . . . . . . . . . . . . . . 19

4-4 Telephone connections. . . . . . . . . . . . . . . . . . . . . . . . 20

Telephone dialler

4-5 Earth connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4-6 Inserting the SIM card. . . . . . . . . . . . . . . . . . . . . . . . 20

4-7 PC Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4-8 Wiring and balancing alarm detectors . . . . . . . . . . . . . 22

4-9 Connecting the outputs . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 5 First power up . . . . . . . . . . . . . . . . . . . . . . . . 26

5-1 Initializing phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5-2 Easyscan procedure. . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chapter 6 Project development and programming. . . . . . . 28

6-1 Using the SmartLeague software program . . . . . . . . . . 28

6-2 Using the software program . . . . . . . . . . . . . . . . . . . . 29

6-3 Programming via the software . . . . . . . . . . . . . . . . . . 30

6-4 Reset default settings . . . . . . . . . . . . . . . . . . . . . . . . 31

6-5 Maintenance and monitoring. . . . . . . . . . . . . . . . . . . . 31

Chapter 7 EN50136 Compliance . . . . . . . . . . . . . . . . . . . 33

7-1 ATS Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7-2 Access Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

7-3 Connection with alarm control panel (Control and Indicating Equipment) 34

Appendix A Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Appendix B Declaration of conformity . . . . . . . . . . . . . . . . 38

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

About this manual 5

Installation and programming manual

ABOUT THIS MANUAL

MANUAL CODE

DCMIINE0SLINKA

VERSION

1.70

0-1Terminology

DIALER

A device which sends voice calls or digital reports to programmed

contact numbers in the event of an alarm.

DEVICE

If not otherwise specified, refers to the SmartLinkAdv.

QUALIFIED

PERSONNEL

Persons whose training, expertise and knowledge of the products and

laws regarding security systems, are able to create, in accordance with

the requirements of the purchaser, the most suitable solution for the

protected premises.

LEFT, RIGHT, BEHIND,

ABOVE, BELOW

Directions as seen by the operator when directly in front of the

mounted device.

SELECT

Click on a specific item on the interface (drop-down menu, options

box, graphic object, etc.).

PRESS

Click on a video button, or push a key on the control-panel keypad.

0-2Graphic conventions

Following are the graphic conventions used in this manual.

Note

The “Note” sections contain important information relating to the text.

ATTENTION!

The “Attention” prompts indicate that total or partial disregard of

the procedure could damage the device or its peripherals.

Conventions Example Description

Text in italics Refer to paragraph 0-2 Graphic

conventions Indicates the title of a chapter, section,

paragraph, table or figure in this manual

or other published reference.

Text in boldface

menu ?

Information

Indicates the title of a section, key or

software item

<text> #<AccountCode> Editable field

6General information

Telephone dialler

Chapter 1

GENERAL INFORMATION

1-1Manufacturer's details

Manufacturer: INIM Electronics s.r.l.

Production plant: Centobuchi, via Dei Lavoratori 10

63076 Monteprandone (AP), Italy

Tel: +39 0735 705007

Fax: +39 0735 704912

e-mail: [email protected]z

Web: www.inim.biz

The persons authorized by the manufacturer to repair or replace the

parts of this system, hold authorization to work on INIM Electronics

brand devices only.

1-2Description of the product

and various models

DESCRIPTION

The SmartLink device described in this manual is a reserve

telephone line generator and telephone dialler.

RESERVE TELEPHONE

LINE

If problems occur on the PSTN (linedown conditions, etc.), the

SmartLinkAdv will guarantee communications by switching to a GSM

provider and allowing any connected devices to operate normally.

When the SmartLinkAdv operates as a simulated line, it tests the PSTN

line periodically to check if the communication problems have cleared.

If the PSTN line is found to be operating normally and there are no

ongoing telephone calls passing through the interface, the system will

switch back to the main PSTN line. Otherwise, it will switch back to the

PSTN only when all the necessary outgoing calls have been forwarded.

TELEPHONE DIALLER

SmartLinkAdv generates a series of operations (e.g. calls, output

commands) in relation to internal events (e.g. low battery) or

external events (e.g. input status changes, received call, received

SMS commands).

OTHER FUNCTIONS

• Status control and output actions via SMS messages

• Output control and output actions via calls using the voice menu

• Output actions via Caller ID recognition

• Digital dialler (Ademco 10bps, Ademco 14bps, Franklin 20bps,

Radionics 40bps, Scantronic 10bps, Contact-ID, SIA-IP)

• SMS dialler

• Voice dialler

• Open tamper protection

• Jamming detector

• Easyscan (automatic search for the best GSM provider)

General information 7

Installation and programming manual

MODELS

SmartLinkAdv/GP - GSM and PSTN reserve line generator and

telephone dialler

SmartLinkAdv/G - GSM reserve line generator and telephone

dialler

SmartLinkAdv/P - PSTN telephone dialler

STANDARDS APPLIED

EN 50131-1:2006 + A1:2009,

EN 50131-10:2014,

EN 50136-1:2012,

EN 50136-2:2013,

EN 50130-4:2011 + A1:2014,

EN 50130-5:2011,

CEB T014:2013-04 (ed.3)

SECURITY RATING

Security rating 3 for SmartLinkAdv/G and SmartLinkAdv/GP models

and security rating 2 for SmartLinkAdv/P.

Table 1-1: Applications

Models

SmartLinkAdv

/P SmartLinkAdv

/G SmartLinkAdv

/GP

Reserve telephone line generator • •

On-board voice module with 15 minutes • •

Anti-intrusion function • •

Dialler over GSM network and PSTN landline and

GPRS modem ••

Dialler over PSTN landline • •

SMS dialler over GSM network • •

Manages DTMF commands over GSM network • •

Manages DTMF commands over PSTN landline • •

Priority channel choice between SM network and

PSTN landline ••

Fault signalling • • •

Incoming SMS divert • •

Actions using Caller ID • •

Manages commands via SMS with code or identifier

of the sender ••

Ring or SMS confirmation for commands receiving

via SMS ••

Warning calls for each event over GSM network and

PSTN landline ••

Manages GPRS for remote programming/monitoring • •

Manages supervision over GPRS • •

Periodic supervision between 2 SmartLinkAdv

devices ••

Manages SIA-IP and transmits information to alarm

receiving centres via the most widely used protocols ••

Answerphone with voice menu • •

Manages and signals "Roaming" status • •

EasyScan function • •

Jamming detector function • •

SIM card credit enquiry • •

8General information

Telephone dialler

1-3Supplied documentation

• Installation manual (this manual)

• SmartLeague software programming manual

The manuals are regularly supplied with the apparatus and can be

downloaded from the “Download” section of our website:

www.inim.biz.

The installation manual is included in the package. To order further

copies contact the offices at INIM Electronics.

Device description 9

Installation and programming manual

Chapter 2

DEVICE DESCRIPTION

2-1Unpacking the device

The device is packed inside a cardboard box containing:

• The SmartLinkAdv comprises a PCB mounted inside a metal box

• A bag containing the installation kit comprising:

•• Antenna

•• 10 x 3k9 Ohm 1/4W resistors

•• 10 x 6k8 Ohm 1/4W resistors

•• 4 screws to secure the cover to the metal backbox

• Installation manual (this manual)

The installation kit does not include:

• 1.2 A/h battery

• Switching power supply/battery charger

•SIMcard

Note

These items must be purchased before beginning the installation phase.

2-2Accessory items

The following accessory devices are individually packed and must be

ordered separately:

• IPS12015 Switching power supply/battery charger

• TamperNO dislodgement tamper protection

• Remote antenna for indoor use

• High-performance GSM antenna

• High-performance GSM antenna with 3m of cable for indoor use

2-3Technical description

The data label is located inside the metal box.

Following are the technical features of the devices and the

description of their components:

10 Device description

Telephone dialler

Table 2-1: Description of parts

Terminal board

Battery housing

Open-tamper microswitch

Wall-mount screw locations

Battery connector

Screw holes

USB connector

Cable entries

SIM card connector

Dislodgement-tamper microswitch location

Antenna connector

Antenna placement hole

Default-data reset button

Buzzer

Activity LED

GSM signal reception LED

PCB board Metal backbox

L L

M M

N N

Table 2-2: Terminals on the terminal board

n. icon/identifier function

1+14V

Positive power terminal

2 - 14V

Negative power terminal

3+AUX

12V Ancillary power supply

Power supply negative (earth or GND)

5-6-7-8-9 T1-T2-T3-T4-T5

Control panel input terminals: T1, T2, T3, T4 and T5

Earth connection

15-16

Internal telephone-line connection

17-18 PSTN

Landline connection

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere INIM Electronics Telefonsystem Handbücher

INIM Electronics

INIM Electronics SmartLink/P Advanced Montageanleitung

Beliebte Telefonsystem Handbücher anderer Marken

Teleco

Teleco Perfect Voice Tis 16 Bedienungsanleitung

AT&T

AT&T Network Adapter 25 Bedienungsanleitung

AVE

AVE AF902R-CE Bedienungsanleitung

Tynetec

Tynetec Advent xt Bedienungsanleitung

Ericsson

Ericsson DCT1800-S Bedienungsanleitung

NEC

NEC Electra Elite 192 Bedienungsanleitung

Alcatel

Alcatel EASY REFLEXES 4200 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Bedienungsanleitung

Bticino

Bticino PABX 28D Bedienungsanleitung

NEC

NEC SL 2100 Bedienungsanleitung

Sonifex

Sonifex Phone In 6 Bedienungsanleitung

TransTel Communications

TransTel Communications TD-824i Montageanleitung

Nortel

Nortel BCM50 Produkthandbuch

Panasonic

Panasonic KX-TS25B Bedienungsanleitung

ASCOM

ASCOM TD 92375GB Betriebsanleitung

Karel

Karel MS26S Produktinformationsblatt

EnGenius

EnGenius DuraFon PRO Bedienungsanleitung

Teledat

Teledat X130 DSL Bedienungsanleitung