H.323 , SIP and MGCP optional Settings
Fields Remarks
Menu Password Default Password is 8888, for subsequent PW changes
Go to Settings -> System page
Enter new password in Menu Password settings or
Leave the settings blank to disable the feature
GK Password The feature supports MD5, RAS authentication.
Enter a password (can be both alphanumeric) which is
used for authentication when Videophone registers to a
GateKeeper
IVAS Address The Upgrade server provides new firmware notices to
all registered end devices and also supports firmware
upgrade process
Enter the IP address of the Upgrade server.
SNTP Address The server provides the time settings in Videophone
Enter the IP address of the Time server.
Timezone GMT Scroll and select one out of the 29 pre-configured time
zones
Auto answer Select 1 ring,2 rings,3 rings,4 rings or 5 rings.to
enable Videophone to auto answer mode. Select Never to
disable feature
Screen saver This feature enables LCD to power down when
VideoPhone is in a power save mode.
Select either 5s, 10s, 30s, 1 min, 2 mins, 10 mins,
30 mins, 1 hour or never
Language Select English or Chinese for the preferred language
display in Menu and LCD messages
PPPoE Select On or Off to control the activation of the feature to
support PPPoE deployment
Audio codec Select either G.711 A-law, G.711 u-law or G.723.1 and
G.729 for the preferred audio codec standard
Video size Select either CIF for resolution at 352 x 288 pixels or QCIF
for resolution at 176 x144 pixels
Video quality Select either High, Average or Low for the preferred video
quality settings
Please reboot your videophone after configuring the above settings.
