Innovative Technology NV9 USB Betriebsanleitung

Innovative Technology Ltd

Derker Street, Oldham,

OL1 4EQ.

T: +44 1 1 2 9999

F: +44 1 1 20 2090

W: www.innovative-technology.co.uk

NV9USB MAINTENANCE GUIDE

The NV9USB Validator has been designed to minimise any

performance variation over time. Much of this is achieved by

careful hardware and software design. However, depending upon

the environment the NV9USB may at some time require cleaning,

belt changing or note path clearing.

Cleaning – Every Month (Or As Required)

CAUTION: DO NOT USE SOLVENT BASED CLEANERS SUCH AS ALCOHOL,

PETROL, METHYLATED SPIRITS, WHITE SPIRIT OR PCB CLEANER. THIS WILL

RESULT IN PERMANENT DAMAGE TO THE VALIDATOR, ONLY USE A MILD

DETERGENT.

To clean, slide the red release catch on the end of the NV9USB Validator to the left, to open

the note path. The note path and lozenge are now exposed for cleaning.

Carefully wipe the surfaces with a soft lint free cloth that has been dampened with a water

and mild detergent solution (i.e. household washing up liquid). Take particular care around

all the sensor lenses (see below), ensuring they are clean and dry.

CAUTION: WHEN CLEANING THE

RECESSED FRONT SENSORS,

USE A SMALL SOFT BRUSH OR

COTTON WOOL BUD

If a lens has become badly scratched

do not attempt to polish it. Contact

ITL for further advise, as there may

be damage to the optical properties

of the lens.

Belt Cleaning – Every 2 Months (Or As Required)

1. Ensure the validator is enabled (i.e. Bezel lights are illuminated)

2. Remove Bezel.

3. Insert a piece of paper, which is narrower than the width

between

the two belts, in the centre of the note path to activate the

drive motor.

4. Use a lint free cloth dampened with water containing a mild

detergent such as dish detergent and hold it against each

drive belt as is turns.

5. Repeat steps 3 and 4 until all dust and debris has been

removed from both belts.

. Repeat step 3 using a DRY lint free cloth to remove any

excess moisture.

Note Path Debris Clearing / Belt Changing – When required

To access the note path and lozenge, slide the red release catch on the end of the NV9USB

Validator and lift to open. Push the lozenge release catch and lift; the note path and lozenge

are now exposed for maintenance (see picture).

Debris Cle ring

Examine the note paths, lozenge and note

stacker for any dirt or debris.

Carefully clear and wipe the surfaces of the note

paths and lozenge with a soft lint free cloth that

has been dampened with a water and mild

detergent solution (i.e. household washing up

liquid.). Take particular care around all the

sensor lenses (see picture), ensuring they are

clean and dry.

Check that the note stacker and cash box spring

plate are not jammed.

Belt Ch nging

Remove and place the lozenge on a clean dry surface and remove

the belts, sliding them off the smallest wheels first. This will be

easier if pressure is applied to the larger wheels at the front. Replace

the belts using the reverse procedure from the above.

Andere Handbücher für NV9 USB

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Innovative Technology Banknotenprüfer Handbücher

Innovative Technology

Innovative Technology GA326-3 Bedienungsanleitung

Innovative Technology

Innovative Technology NV200 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology BV20 Bedienungsanleitung

Innovative Technology

Innovative Technology NV7 Bedienungsanleitung

Innovative Technology

Innovative Technology CCE 4O USB Bedienungsanleitung

Innovative Technology

Innovative Technology NV10 Family Bedienungsanleitung

Innovative Technology

Innovative Technology NV4 Bedienungsanleitung

Innovative Technology

Innovative Technology NV200 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology NV9 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology NV9 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology NV9 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology NV200 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology BV50 Bedienungsanleitung

Innovative Technology

Innovative Technology NV9 USB Bedienungsanleitung

Innovative Technology

Innovative Technology NV200 Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology BV100 Bedienungsanleitung

Innovative Technology

Innovative Technology NV11 Bedienungsanleitung

Innovative Technology

Innovative Technology BV20-1 Bedienungsanleitung

Innovative Technology

Innovative Technology NV200S Spectral Bedienungsanleitung

Innovative Technology

Innovative Technology Smart Coin System Bedienungsanleitung

Beliebte Banknotenprüfer Handbücher anderer Marken

Alberici

Alberici BILLYONE UN1 Bedienungsanleitung

Kolibri

Kolibri Bishop Bedienungsanleitung

Royal Sovereign

Royal Sovereign RCD-2000 Bedienungsanleitung

Inves

Inves Secureuro Plus Bedienungsanleitung

Innovative

Innovative NV200 Bedienungsanleitung

ICT

ICT Bill Validator S7 Series Bedienungsanleitung

Kolibri

Kolibri Domino Bedienungsanleitung

CUMMINS ALLISON

CUMMINS ALLISON JetScan Bedienungsanleitung

Hamilton

Hamilton XE Kurzanleitung

CashCode

CashCode AMZ-154 Bedienungsanleitung

Innovate Technology

Innovate Technology NV10 Bedienungsanleitung

JCM

JCM iVIZION Handbuch

Amrotec

Amrotec MIB-11F Bedienungsanleitung

Crane

Crane NRI G-13.mft Standard Bedienungsanleitung

CASH TECHNOLOGY

CASH TECHNOLOGY CCE 20 Bedienungsanleitung

JCM

JCM VEGA Series Bedienungsanleitung

JCM

JCM TBV Series Installationsanleitung

NRI

NRI G-13.6 Series Leitfaden