Insignia NS-3IN1MT50C Bedienungsanleitung

SAFETY INFORMATION AND SPECIFICATIONS .2

PACKAGE CONTENTS: PARTS ..................................4

PACKAGE CONTENTS: HARDWARE.......................5

ASSEMBLY INSTRUCTIONS ......................................7

CARE AND MAINTENANCE ................................... 29

Wood Finish and Glass

3-in-1 TV Stand

for TVs up to 52”/135 lbs.

NS-3IN1MT50C/NS-3IN1MT50C-C

Before using your new product, please read these instructions to prevent any damage.

USER GUIDE

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 1 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

SAFETY INFORMATION

AND SPECIFICATIONS

CAUTION: The top surface of this stand

is designed for use with a product

weighing no more than

135 lbs. (61.2 kg) and having a width

that permits it to sit evenly on the

stand with no more than a one-inch overhang on

each side of the shelf. Use with products that weigh

more than the maximum weight allowed, or with

dimensions that extend beyond the maximum

width may result in instability, which may result in

injury.

CAUTION: This product contains small

items that could be a choking hazard if

swallowed.

Keep these items away from young

children!

Maximum overall weight: 235 lbs (106.6 kg)

Maximum top shelf weight: 135 lbs (61.2 kg)

Maximum lower shelf weight: 50 lbs (22.6 kg)

Maximum screen size: 52” diagonal (50” width)

side of the top shelf

Overall dimensions (H × W × D):

55 × 48 × 21.1 in. (139.7 x 122 x 53.6 cm)

32 inch

(81.3 cm)

8.7 inch

(22.2 cm)

55 inch

(139.7 cm)

Long support: 48” high (122 cm)

Back frame: 21.7” high (55.2 cm)

9.3 inch

(23.5 cm)

9.3 inch

(23.5 cm)

21.1 inch

(53.6 cm) 48 inch

(122 cm)

18.8 inch

(47.8 cm)

16.3 inch

(41.4 cm)

15 inch

(38 cm)

40 inch

(101.6 cm)

44 inch

(111.8 cm) 22 inch

(55.9 cm)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 2 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

Tools needed:

Phillips screwdriver

Level

Power drill

Hammer

Edge-to-edge stud finder

Pencil

3/8” drill bit (for tipping

restraint)

3/16” wood drill bit

7/16” masonry drill bit

1/2” Socket wrench

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 3 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

PACKAGE CONTENTS: PARTS

Make sure that you have all the parts necessary to assemble your new TV stand.

ALeft side frame (1) BRight side frame (1)

DLong rear support (1)

ETop crossbar (1)

CShort back frame (1)

F Top stringer (1)

GMiddle crossbar (1)

HMiddle stringer (1)

I Bottom brace (1)

J Bottom stringer (1)

KTop glass (1)

LMiddle glass shelf (1)

MBottom glass shelf (1)

NSwivel bracket (1)

PMounting frame (1)

Q TV bracket (2)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 4 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

PACKAGE CONTENTS: HARDWARE

Note: You may receive extra hardware.Note: You may receive extra hardware.

Make sure that you have all the hardware necessary to assemble your new TV stand.

Label Hardware Qty.

S19

W12

Cable clip

Suction cup

Bolt 3/4” (19.05

mm)

Bolt 1 3/8”

(34.92 mm)

Bolt 1 5/8”

(41.27 mm)

Bolt 2 1/4”

(57.15 mm)

Label Hardware Qty.

X32

Y36

AA 4

BB 4

CC 4

DD 1

EE 2

FF 1

Lock washer

Flat washer

Hex nut

Lag bolt

Large flat washer

Concrete anchor

Open wrench

Allen (hex) wrench 0.158” (4 mm)

Touch-up pen

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 5 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

PACKAGE CONTENTS: HARDWARE (continued)

Sellpoints Video Instruction Guide

Go to http://vig.sellpoints.com/insignia/default/ISGBBY00001.html to view step-by-step instructional videos for

assembling and installing your product.

Label Hardware Qty.

GG 1

HH 4

II 4

JJ 4

KK 4

LL 4

MM 4

NN 4

PP 4

Tipping restraint hardware kit

Bolt M4 × 12 mm

Bolt M4 × 30 mm

Bolt M5 × 12 mm

Bolt M5 × 30 mm

Bolt M6 × 12 mm

Bolt M6 × 35 mm

Bolt M8 × 16 mm

Bolt M8 × 40 mm

Label Hardware Qty.

QQ 4

RR 4

SS 4

TT 4

UU 4

VV 4

WW 8

XX 4

Lock washer M4

Lock washer M5

Lock washer M6

Lock washer M8

Large spacer

Small spacer

Flat washer M4/M5

Flat washer M6/M8

10 20 30 40 50 60 70 80 90 100mm

1234in

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 6 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

ASSEMBLY INSTRUCTIONS

Step 1: Align and attach the left and right side frames (A and B) to the

back frame (C)

Caution: Assemble your stand on a carpeted floor or the empty carton to avoid scratching your stand.

1Insert two 1 3/8" bolts (U) through both lock washers (X) and flat washers (Y) through the drilled holes on the

left side frame (A) and screw into the threaded holes on the side of the short back frame (C).

2Repeat the same procedure to attach the right side frame (B).

NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all

bolts. This will make the assembly easier.

You’ll need:

U(4) X(4) Y(4) EE (1)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 7 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

Step 2

: Align and attach the upper and middle crossbars (E and G) and the bottom brace (I) to

the side frames (A and B)

1Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top

rail of the side frames (Aand B) and securely screw into the threaded holes of the top crossbar (E).

2Repeat the same procedure to attach the middle crossbar (G) to the middle rail of the side frames (Aand B).

3Insert two 2¼” bolts (W) through the lock washers (X) and flat washers (Y) through the drilled holes on the

bottom rail of the side frames (Aand B) and securely screw into the threaded holes of the bottom brace (I).

You’ll need:

V(4) W(2)

X(6) Y(6) EE (1)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 8 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

Step 3

: Align and attach the front stringers (F, H, and J) to the front of the side frames (A and B)

1Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top

rail of the side frames (Aand B) and securely screw into the threaded holes of the top stringer (F).

2Repeat the same procedure to attach the middle stringer (H) to the middle rail of the side frames (Aand B).

3Insert two 2¼” bolts (W) through the lock washers (X) and flat washers (Y) through the drilled holes on the

bottom rail of the side frames (Aand B) and securely screw into the threaded holes of the bottom stringer (J).

You’ll need:

V(4) W(2)

X(6) Y(6) EE (1)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 9 Wednesday, May 7, 2014 1:33 PM

3-in-1 TV STAND

www.insigniaproducts.com

Step 4

: Leveling the stand

Stand the assembled frame upright. Adjust the levelers on the side frames (Aand B) to level the assembly.

NOTE: For swivel stand assembly, see “SWIVEL STAND ASSEMBLY INSTRUCTIONS” on page 22. For Wall Mount or

Table Top assembly, continue to the next step.

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 10 Wednesday, May 7, 2014 1:33 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Insignia Inneneinrichtung Handbücher

Insignia

Insignia NS-HW1764G Bedienungsanleitung

Insignia

Insignia NS-HWD1636 Bedienungsanleitung

Insignia

Insignia NS-MG302FMS Bedienungsanleitung

Insignia

Insignia NS-HWMC1848 Bedienungsanleitung

Insignia

Insignia NS-GGCH19 Bedienungsanleitung

Insignia

Insignia NS-ODD3 Bedienungsanleitung

Insignia

Insignia NS-PCGV30 Bedienungsanleitung

Insignia

Insignia NS-SDSK-BL Bedienungsanleitung

Insignia

Insignia NS-HFMOC101 Bedienungsanleitung

Insignia

Insignia NS-FPAMC23 Bedienungsanleitung

Insignia

Insignia NS-HWG1965 Bedienungsanleitung

Insignia

Insignia NS-MG1344 Bedienungsanleitung

Insignia

Insignia NS-HFMS80 Bedienungsanleitung

Insignia

Insignia NS-HWD1848 Bedienungsanleitung

Insignia

Insignia NS-WD1450 Bedienungsanleitung

Insignia

Insignia NS-HF2007 Bedienungsanleitung

Insignia

Insignia NS-HWG1865 Bedienungsanleitung

Insignia

Insignia NS-HF2003 Bedienungsanleitung

Insignia

Insignia NS-ODL3 Bedienungsanleitung

Insignia

Insignia NS-HWMG1844 Bedienungsanleitung

Insignia

Insignia NS-HWMG1663 Bedienungsanleitung

Insignia

Insignia NS-OCP3 Bedienungsanleitung

Insignia

Insignia NS-ODS3 Bedienungsanleitung

Insignia

Insignia NS-HWMG1754G Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung