Inspire CDVK2 Power Tower Beilage
ASSEMBLY & OPERATION MANUAL
CDVK2
Power Tower
RECORD SERIAL NUMBER HERE
www.inspirefitness.net by Health In Motion LLC Feb. 2011
TABLE OF CONTENTS
Section Description………………………………………………….. Page
Instructions………………………………………………………………….. 1
Tools Required……………………………………………………………… 1
Parts & Hardware List………………………………………………….. 2-3
Hardware Sizing Chart…………………………………………………. 4
Assembly Instructions………………………………………………….. 5-14
Exploded Diagram…………………………………………………………. 15
Decal Reference …………………………………………………………… 16
General Maintenance Information…….………………………… 17
Maintenance Schedule…….………………………………………….. 18
Limited Warranty.………………………….……………………………. 19
BEFORE ASSEMBLING YOUR Power Tower
IMPORTANT: Read this entire manual before attempting to build or use this
product. This manual contains step by step instructions for proper assembly.
Use the parts list included in this manual to verify that all parts are accounted
for before assembly. If any parts are missing, contact the retailer of this
product for replacement parts. Or, call Inspire at 1-877-738-1729
Service of your home gym should only be preformed by an authorized
INSPIRE retailer. Service preformed by anyone else can result in loss of
warranty. Use only Inspire replacement parts on this machine. The use of
any other brand of parts can also result in a loss of warranty. If you need
help finding an authorized retailer, please contact us directly:
Inspire Fitness
637 S. State College Blvd.
Fullerton, CA 92831
Ph: 877-738-1729
Fx: 714-738-1728
www.inspirefitness.net
REGISTER YOUR GYM ONLINE AT WWW.INSPIREFITNESS.NET
TOOLS REQUIRED FOR ASSEMBLY
• Metric socket set
• Adjustable wrench
• Tape Measure
• Rubber Mallet
PAGE 1
Part list for Power Tower (CDVK2)
Part# Description Spec. Q'ty (pcs) Remark
1 Main Base 1
2 Main Upright 1
3L Left Leg 1
3R Right Leg 1
4L Left Support Arm 1
4R Right Support Arm 1
5 Cross Brace 1
6 Top Beam 1
7 Lat Bar Assembly 1
8R Right Handlebar Assembly 1
8L Left Handlebar Assembly 1
9 Connector Plate 1
10 Arm Rest Cushion 2
11 Backrest Cushion Assembly 1
12 Backrest Cushion Hanging Plate 1
13 U Bracket 2
14 Backrest Cushion Protection Plate 1
15 Backrest Cushion Limit Plate 1
16L Push Up Tube (Left) 1
16R Push Up Tube (Right) 1
17 Steel Cable Assembly 1
18 End Cap 1 2
19 End Cover 1 BLACK
20 End Cap 2 Fit with100*50*2elliptical tube 1 BLACK
21 Rubber Plate 53*32*2 5 BLACK
22 Foot pad M10*30 3 BLACK
23 Rubber Cushion Fit with φ25.4 Round Tube 4 BLACK
24 End Cap 3 Fit φ25.4*2 Round tube 4 BLACK
25 Handlebar Grip 1 Φ33*Φ21*310 2 BLACK
26 End Cap 4 Fit with Φ50.8 round tube 2 BLACK
27 Handlebar Grip 2 Φ33*Φ21*150 2 BLACK
28 End Cap 5 Fit with 75*50*2 tube 3 BLACK
29 EVA Pad 100*25*2 4 BLACK
30 Push Up Tube Grip Φ33*Φ21*350 2 BLACK
31 Allen Head Screw M12 2 Black Zinc Plated
32 Allen Head Screw M10*105 3 Black Zinc Plated
33 Allen Head Screw M10*80 2 Black Zinc Plated
34 Carriage Bolts M8*40 4 Black Zinc Plated
35 Allen Head Screw M10*100 2 Black Zinc Plated
36 Allen Head Screw M10*20 6 Black Zinc Plated
PAGE 2
Part list continued Power Tower (CDVK2)
37 Shoulder Bolt φ12*93*M10 1 Black Zinc Plated
38 Allen Head Screw M8*15 4 Black Zinc Plated
39 Allen Head Screw M10*70 2 Black Zinc Plated
40 Allen Head Screw M10*125 2 Black Zinc Plated
41 Philips head self Drilling Screw ST4.2*10 4 Black Zinc Plated
42 Allen Head Screw M8*20 10 Black Zinc Plated
43 Flat washer φ10 24 Black Zinc Plated
44 Large Washer Φ26*Φ10*2 6 Black Zinc Plated
45 Flat washer φ8 12 Black Zinc Plated
46 Flat washer φ12 1 Black Zinc Plated
47 End cap Fit with φ25.4*2 ellipse tube 2 Black
Hex key wrench 5# 1 Zinc Plated
Hex key wrench 6# 1 Zinc Plated
Hex key wrench 8# 1 Zinc Plated
thin wrench δ3 1 Zinc Plated
PAGE 3
PAGE 4
STOP! PLEASE READ
To assemble the Inspire Fitness CDVK, follow the hardware listing for the CDVK on the
hardware board.
For example, the hardware for STEP 1 is found on the hardware board in the section listed as:
CDVK-Step 1
PT1-Step 1
And the hardware for STEP 2 is found on the hardware board in the section listed as:
CDVK-Step 2
PT1-Step 2
Simply follow the listings for the CDVK steps on the hardware board.
PAGE 5
STEP 1
1 –
Attach Right & Left Legs (#3R & 3L) to Main Upright (#2) & Main Base (#1) using:
Three M10 x 4 1/8” bolts with six washers and three locknuts
Attach Main Upright (#2) to Main Base (#1) using:
One M10 x 4/5”bolt with one flat washer
Note: Finger Tighten Only
Page 6 02/11
STEP 2
Attach Left & Right Support Arms (#4L & 4R) to Main Upright (#2) using:
Two M10 x 4” bolts with two flat washers and two locknuts
Attach Both Support Arms (#4L & 4R) to both Legs (#3L & 3R) using:
Two M10 x 3 1/8” bolts four large washers and two locknuts
Step 5: Attach Cross Brace (#5) to Support Arms (#4L & 4R) Using:
Four M8 x 1 3/5” bolts and four locknuts
Note: Wrench Tighten Steps 1 and 2 now.
Page 7 02/11
STEP 3
Attach Lat Bar Assembly (#7) to Top Beam Assembly (#6) Using:
Two M10 x 4 7/8” bolts two flat washers and two locknuts
Top Cover (#19) is already attached to Lat Bar Assembly (#7):
NO HARDWARE REQUIRED
Note: Wrench tighten Step 3 now.
Page 8 02/11
Inhaltsverzeichnis
Andere Inspire Heim-Fitnessstudio Handbücher
Inspire
Inspire CR 2 Bedienungsanleitung
Inspire
Inspire SCS-1 Montage- und Bedienungsanleitung
Inspire
Inspire BL1 Inspire Beilage
Inspire
Inspire M5 Beilage
Inspire
Inspire BL1 Inspire Beilage
Inspire
Inspire FTX Beilage
Inspire
Inspire M3 Beilage
Inspire
Inspire FT1 Beilage
Inspire
Inspire M5 Bedienungsanleitung
Inspire
Inspire M1 Beilage
Beliebte Heim-Fitnessstudio Handbücher anderer Marken
Horizon Fitness
Horizon Fitness OXFORD 6 Bedienungsanleitung
Energetics
Energetics Multi Trainer 5.1 Bedienungsanleitung
Matrix
Matrix MG-PL Series Bedienungsanleitung
Reebok
Reebok Tbr2i Bedienungs- und Wartungshandbuch
Weider
Weider 8300 Hard Drive Bedienungsanleitung
Pure Fitness
Pure Fitness 8526HE Bedienungsanleitung
