INSTEON 2856S3 Bedienungsanleitung

ICON

Appliance Adapter

Appliance Module with INSTEON® Technology

For model:

#2856S3/2856S3B ICON Appliance Adapter

ICON Appliance Adapter User’s Guide

TABLE OF CONTENTS

ABOUT ICON APPLIANCE ADAPTER ....................................................................................................... 3

What is INSTEON?.................................................................................................................................... 3

Key ICON Appliance Adapter Features..................................................................................................... 3

HOW TO INSTALL ICON APPLIANCE ADAPTER..................................................................................... 4

ICON Appliance Adapter Installation Tips ................................................................................................. 4

Installing ICON Appliance Adapter............................................................................................................ 4

HOW TO SET UP ICON APPLIANCE ADAPTER....................................................................................... 5

Linking ICON Appliance Adapter to an INSTEON Controller.................................................................... 5

Unlinking ICON Appliance Adapter from an INSTEON Controller ............................................................ 6

Creating an INSTEON Scene.................................................................................................................... 7

ADVANCED FEATURES OF ICON APPLIANCE ADAPTER..................................................................... 8

Restoring Power to ICON Appliance Adapter ........................................................................................... 8

Resetting ICON Appliance Adapter to Its Factory Default Settings .......................................................... 8

X10 PROGRAMMING OPTIONS ................................................................................................................. 9

Setting the X10 Primary Address .............................................................................................................. 9

Removing the X10 Primary Address ......................................................................................................... 9

Enabling or Disabling Local Control .......................................................................................................... 9

ABOUT INSTEON ...................................................................................................................................... 10

Understanding Why an INSTEON Network Is Reliable........................................................................... 10

Further Enhancing Reliability .................................................................................................................. 10

Using Access Points to Upgrade Your INSTEON Network..................................................................... 10

About INSTEON and X10........................................................................................................................ 11

TROUBLESHOOTING................................................................................................................................ 12

SPECIFICATIONS ...................................................................................................................................... 13

ICON Appliance Adapter Specifications.................................................................................................. 14

Certification.............................................................................................................................................. 15

Limited Warranty ..................................................................................................................................... 15

Icon Appliance Adapter User’s Guide

Page 3 of 15

ABOUT ICON APPLIANCE ADAPTER

Congratulations on purchasing the ICON Appliance Adapter. Your new ICON Appliance Adapter allows

you to remotely control any non-dimmable devices or lamps in your home at the touch of a button.

What is INSTEON?

INSTEON is a simple, reliable, and affordable breakthrough in home control. Simple, because Plug-n-

Tap™setup is a breeze, and there are no wires to add – INSTEON uses existing powerline wiring as well

as radio-frequency for communication. Reliable, because every INSTEON device is a two-way repeater.

And affordable, not just because of low cost, but because INSTEON also works with legacy X10 devices.

An INSTEON home grows in value with every INSTEON device you add, making life more convenient,

safe and fun.

Key ICON Appliance Adapter Features

•Setup is easy – ICON Appliance Adapter installs in minutes

•Controls all standard appliances up to 10 Amps and incandescent lights, up to 400 watts

•Responds to commands from X10 controllers

•Shows INSTEON and X10 activity with a green status LED

•Stores setup state in memory, even while unplugged

•Quiet Relay

•Local load sensing easily disabled

•Set button also functions as On/Off toggle switch

•Warranted for one year

Status LED

Controlled

Out

SET Button

Icon Appliance Adapter User’s Guide

Page 4 of 15

HOW TO INSTALL ICON APPLIANCE ADAPTER

ICON Appliance Adapter Installation Tips

•Don’t plug ICON Appliance Adapter into an outlet controlled by a switch, because if the switch is

inadvertently turned off, ICON Appliance Adapter won’t have power.

•Don’t plug Icon Appliance Adapter into a filtered power strip or AC line filter.

•Be sure the non-dimmable device or lamp you want to control is working and that the manual switch

on it is in the ON position.

•Do not use outdoors

•Do not use to control devices that preserve, maintain, or contribute to human or animal safety or life

support.

Installing ICON Appliance Adapter

1. For best INSTEON Network performance, be sure you have properly installed at least two Access

Points.

2. Plug ICON Appliance Adapter into an unswitched wall receptacle.

The green Status LED on the side will illuminate steadily.

3. Plug the non-dimmable device/lamp you want to control into the

controlled outlet on the bottom of ICON Appliance Adapter.

4. The non-dimmable device/lamp you plugged in will turn on. If the

non-dimmable device/lamp does not turn on, turn it on manually.

Caution

Read and understand these instructions before installing, and retain them for future reference.

Icon Appliance Adapter is intended for installation in accordance with the National Electric Code and local regulations in

the United States, or the Canadian Electrical Code and local regulations in Canada. Use indoors only. Icon Appliance

Adapter is not designed nor approved for use on power lines other than 120V 60Hz, single phase. Attempting to use

Icon Appliance Adapter on non-approved powerlines may have hazardous consequences.

Icon Appliance Adapter User’s Guide

Page 5 of 15

HOW TO SET UP ICON APPLIANCE ADAPTER

Linking ICON Appliance Adapter to an INSTEON Controller

1. Select your INSTEON Controller from the list below and follow the method shown to put it into

Linking Mode.

A. ICON Dimmer Switch – Press and hold ICON Dimmer Switch’s Paddle Top for 10

seconds, then release. To confirm that it is in Linking Mode, ICON Dimmer Switch will

flash the light that it is wired to once and begin its LED.

B. ICON Tabletop Controller – Choose the ON/OFF Button Pair you want to use for

controlling ICON Appliance Adapter. Press and hold the ON Button of the pair for 10

seconds. To confirm that it is in Linking Mode, ICON Tabletop Controller’s Status LED

will begin blinking.

C. ICON Keypad Dimmer – Choose the ON Button you want to use for controlling ICON

Appliance Adapter. Press and hold the ON Button for 10 seconds. To confirm that it

is in Linking Mode, ICON Keypad Dimmer will flash the light that it is wired to once and

begin blinking the ON Button that you pushed.

D. Other INSTEON Controllers – See the INSTEON Controller’s User’s Guide.

2. Press and hold the black SET Button on ICON Appliance

Adapter for 3 seconds. The ICON Appliance Adapter’s Status

LED will blink to confirm linking. Depending on the INSTEON

controller, you have about 4 minutes to perform this step before

the unit automatically exits from linking mode.

Icon Appliance Adapter User’s Guide

Page 6 of 15

Unlinking ICON Appliance Adapter from an INSTEON Controller

If you are no longer going to use an ICON Appliance Adapter that has previously been linked to an

INSTEON Controller, it is very important that you unlink it, otherwise the controller will retry any

commands intended for the unused module, thus slowing down your system.

1. Select your INSTEON controller from the list below and follow the method shown to put it into

Unlinking Mode.

A. ICON Dinner Switch– Press and hold ICON Dimmer Switch’s Paddle Top for 10

seconds TWICE. To confirm that it is in Unlinking Mode, ICON Dimmer Switch will

flash the light that it is wired to once for each paddle press and begin blinking its LED.

B. ICON Tabletop Controller – Press and hold the OFF Button of the ON/OFF Button

Pair you used for controlling ICON Appliance Adapter for 10 seconds. To confirm that

it is in Unlinking Mode, ICON Tabletop Adapters Status LED will begin blinking.

C. ICON Keypad Dimmer – Press and hold for 10 seconds the ON Button you used for

controlling ICON Appliance Adapter, then press and hold the same ON Button for 10

seconds again. To confirm that it is in Unlinking Mode, ICON Keypad Dimmer will

flash the light that it is wired to once and begin blinking the ON Button that you

pushed.

D. Other INSTEON Controllers – See the INSTEON Controller’s User’s Guide.

2. Press and hold the black SET Button on ICON Appliance Adapter

for 3 seconds. The ICON Appliance Adapter’s Status LED will blink

to confirm unlinking. Depending on the INSTEON Controller, you

have about 4 minutes to perform this step before Unlinking Mode

times out automatically.

Icon Appliance Adapter User’s Guide

Page 7 of 15

Creating an INSTEON Scene

INSTEON Scenes let you activate dramatic lighting moods with the press of just one button. INSTEON

Scenes are very easy to set up – just link more than one INSTEON module to an ON/OFF Button Pair on

an INSTEON Controller. Then, when you press either the ON or the OFF Button on the INSTEON

Controller, all of the INSTEON modules linked in the scene will respond as a group. You can link multiple

ICON Appliance Adapters or other INSTEON modules to multiple INSTEON Controllers.

To add an additional ICON Appliance Adapter to a scene controlled by an ON/OFF Button Pair on an

INSTEON Controller, simply follow the same procedure that you used for linking the first ICON Appliance

Adapter. See Linking ICON Appliance Adapter to an INSTEON Controller, above. To remove an ICON

Appliance Adapter from a scene, see Unlinking ICON Appliance Adapter from an INSTEON Controller.

TIP

With some INSTEON Controllers, you can avoid having to hold a button down for 10 seconds for each

setup step by placing the Controller in Scene Setup Mode, also called Multilink Mode. Refer to your

INSTEON Controller’s User’s Guide for detailed instructions on how to set it to Scene Setup Mode.

The following will work for a Icon™Tabletop Controller.

1. Set the Icon Tabletop Controller to Scene Setup Mode for the ON/OFF Button Pair you want to

use for controlling the scene by pressing and holding the ON Button of the pair for 10 seconds,

then tapping the same ON Button again. Icon Tabletop Controller’s Status LED will blink slowly.

2. Press and hold the black SET Button on Icon Appliance Adapter for 3 seconds. The module’s

Status LED will blink to confirm linking. Icon Tabletop Controller will beep to confirm linking, and

its Status LED will continue to blink slowly.

3. Continue Steps 2 and 3 for any additional INSTEON modules you want to link to the scene.

4. When you are finished linking INSTEON modules to the desired ON/OFF Button, complete Scene

Setup by pressing the ON Button. Icon Tabletop Controller’s Status LED will stop blinking and

remain steadily on. You have about 4 minutes of inactivity before Scene Setup Mode times out

automatically.

Icon Appliance Adapter User’s Guide

Page 8 of 15

ADVANCED FEATURES OF ICON APPLIANCE ADAPTER

Restoring Power to ICON Appliance Adapter

ICON Appliance Adapter stores all of its settings in non-volatile memory, even when unplugged. In the

event of a power loss, ICON Appliance Adapter will automatically return the non-dimmable device/lamp

being controlled to the on/off position it had before the power was interrupted. Similarly, if ICON

Appliance Adapter is plugged into an outlet controlled by a wall switch and you turn the switch off, ICON

Appliance Adapter will turn the non-dimmable device/lamp back on to its prior on/off position when you

turn the wall switch back on.

Resetting ICON Appliance Adapter to Its Factory Default Settings

The factory-reset procedure can be used to clear ICON Appliance Adapter’s memory and restore its

factory default settings. This procedure will clear the unit of all INSTEON Links, and any programmed

X10 Primary Address.

1. Before resetting an ICON Appliance Adapter that has been linked to an INSTEON Controller, be sure

to unlink it from the Controller first. See Unlinking ICON Appliance Adapter from an INSTEON

Controller, above.

2. Unplug ICON Appliance Adapter for about 10 seconds.

3. While holding down the black SET Button on ICON Appliance Adapter, plug ICON Appliance Adapter

back in.

4. After plugging ICON Appliance Adapter back in, continue to hold down the black SET Button for 3

seconds.

5. Release the black SET Button.

6. After several seconds, ICON Appliance Adapter’s Status LED will turn on and the lamp you plugged

in will come on, indicating that the factory reset is complete. ICON Appliance Adapter is now reset to

all the default settings and ready for fresh programming and use.

Icon Appliance Adapter User’s Guide

Page 9 of 15

X10 PROGRAMMING OPTIONS

ICON Appliance Adapter is X10 ready, meaning that it can respond to X10 commands from an X10

controller. However, to operate ICON Appliance Adapter in X10 mode, you must first set up an X10

Primary Address. As it ships from the factory, or after a factory reset procedure, Icon Appliance Adapter

will have no X10 Primary Address assigned.

Setting the X10 Primary Address

You must do this before ICON Appliance Adapter will respond to X10 commands. You can use any

of the 256 possible X10 addresses for the X10 Primary Address.

1. Press and hold the black SET Button on ICON Appliance Adapter for 3 seconds. The green Status

LED will begin flashing and the lamp you are controlling will blink to confirm that you are setting up an

X10 Primary Address.

2. Use an X10 Controller to send an X10 address and an ON command THREE TIMES. You have

about 30 seconds to perform this step before setup mode expires. (NOTE: If you send an X10 OFF

command during this step, Local Control will be disabled. See the next section for an explanation.)

3. Once ICON Appliance Adapter has received the X10 Address and an ON or OFF command, the

Status LED on ICON Appliance Adapter will stop flashing and the X10 Primary Address will be set.

Removing the X10 Primary Address

1. Press and hold the black SET Button on ICON Appliance Adapter for 3 seconds. The green Status

LED will begin flashing to confirm that you are setting up an X10 Primary Address.

2. Press and hold the black SET Button on ICON Appliance Adapter for 3 seconds again.

3. Use an X10 Controller to send any X10 ON Address THREE TIMES. You have about 30 seconds to

perform this step before setup mode expires. The green Status LED will stop flashing to confirm that

you have removed the X10 Primary Address.

Enabling or Disabling Local Control

Local Control allows you to manually turn on the non-dimmable device or lamp you plugged into ICON

Appliance Adapter by using the switch on the device itself, without sending a command from an X10 or

INSTEON Controller. By default, Local Control is enabled. You can disable Local Control by setting the

X10 Primary Address using an X10 OFF command in Step 2 above. Remember that if the switch on the

device itself is turned off, ICON Appliance Adapter will not be able to control the device.

Icon Appliance Adapter User’s Guide

Page 10 of 15

ABOUT INSTEON

Understanding Why an INSTEON Network Is Reliable

INSTEON messages travel throughout the home via Powerline Carrier (PLC) signals on the existing

house wiring, and also via wireless Radio Frequency (RF). As the messages make their way to

INSTEON devices being controlled, they are picked up and retransmitted by all other INSTEON devices

along the way. This method of communicating, called a mesh network, is very reliable because each

additional INSTEON device helps to support the overall network.

To further ensure reliability, every INSTEON device confirms that it has received a command. If an

INSTEON Controller does not receive this confirmation, it will automatically retransmit the command up to

five times.

Further Enhancing Reliability

As signals travel via the powerline or RF throughout the home, they naturally

become weaker the farther they travel. The best way to overcome signals getting

weaker is to increase the coverage of the mesh network by introducing more

INSTEON devices.

It is possible that some audio-video products, computers, power strips or other

electrical equipment may attenuate INSTEON signals on the powerline. You can

temporarily unplug suspected devices to test whether the INSTEON signal

improves. If it does, then you can plug in filters available from Smarthome that will

permanently fix the problem.

Using Access Points to Upgrade Your INSTEON Network

Access Points are ideal for improving signal strength and network coverage throughout your home. In

addition, using two Access Points provides a wireless path for INSTEON signals to travel between the

two separate electrical circuits, called powerline phases, found in most homes. Without a reliable method

for coupling opposite powerline phases, some parts of your home may receive INSTEON signals

intermittently. With at least one Access Point plugged into one of the powerline phases, and at least one

more plugged into the opposite powerline phase, INSTEON powerline signals will be strong everywhere

in your home.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere INSTEON Adapter Handbücher

INSTEON

INSTEON 2441V Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung