Now your device will continuously check for:
•
• Temperature Restorations
• Temperature Probe Cable Fault
• Power failure and restorations
• Low battery
• And keep alive message periods
In case of any temperature alarms you and other users (if registered) will receive SMS including “TEMPH=XXX C”
or “TEMPL=XXX C” texts.
Once cable connection is lost / broken, you and others users will receive SMS including “CABLE FAULT!” text.
In case of power failure, power restoration, keep alive period exceeds and low battery case; you and other users
will only receive SMS including “POWER FAIL”, “POWER OK”, “STILL ALIVE” and “LOW BATTERY” texts.
3.1. Re-configure Your Device
-
mands”.
3.2. Check GSM Signal Strength
Please follow article 3.1 and then only send your last password with SMS. You will receive “CONFIG OK <XX>,
TEMPL <LL> TEMPH <HH>” text (where XX is GSM signal strength, LL is the low alarm limit and HH is the high
3.3. Reset Your Device
solid ON. Then send an SMS to the device including “RESET” command. LED will blink a few times and become so-
Admin Number”.
3. Normal operation and alarms
