Intel SR2400 Bedienungsanleitung

Intel® Server Chassis SR2400

User Guide

Order Number: C51501-002

Disclaimer

Information in this document is provided in connection with Intel®products. No license, express or implied, by estoppel or

otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions

of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating

to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability,

or infringement of any patent, copyright or other intellectual property right. Intel products are not designed, intended or

authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of

the Intel product could create a situation where personal injury or death may occur. Intel may make changes to

specifications and product descriptions at any time, without notice.

Intel server boards contain a number of high-density VLSI and power delivery components that need adequate airflow for

cooling. Intel’s own chassis are designed and tested to meet the intended thermal requirements of these components when

the fully integrated system is used together. It is the responsibility of the system integrator that chooses not to use Intel

developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of airflow

required for their specific application and environmental conditions. Intel Corporation can not be held responsible if

components fail or the server board does not operate correctly when used outside any of their published operating or non-

operating limits.

Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the

United States and other countries.

*Other names and brands may be claimed as the property of others.

Intel® Server Chassis SR2400 User Guide

Preface

About this Manual

Thank you for purchasing and using the Intel®Server Chassis SR2400.

This manual is written for system technicians who are responsible for troubleshooting, upgrading,

and repairing this server chassis. This document provides a brief overview of the features of the

board/chassis, a list of accessories or other components you may need, troubleshooting information,

and instructions on how to add and replace components on the Intel Server Chassis SR2400. For the

latest version of this manual, refer to

http://support.intel.com/support/motherboards/server/chassis/SR2400/manual.htm

✏NOTE

The Server Chassis SR2400 is used for multiple server boards. Before

purchasing or attempting to install any component discussed in this manual,

refer to the documentation provided with your server board to ensure the

component is compatible with your server board.

Manual Organization

Chapter 1 provides a brief overview of the Server Chassis SR2400. In this chapter, you will find a

list of the server chassis features, pictures of the product, and product diagrams to help you identify

components and their locations.

Chapter 2 provides instructions on adding and replacing components. Use this chapter for step-by-

step instructions and diagrams for installing or replacing components such as the frong panel board,

fans, power supply and other components.

At the back of this book, you will find some technical specifications1, regulatory information,

“getting help” information, and the warranty.

Product Accessories

The server chassis is compatible with the following Intel®Server Boards and Platforms:

Intel®Server Board SE7520JR2

Intel®Server Board SE7320VP2

Intel®Server Platform SR2400JR2 (integrated system)

1For complete technical specifications and additional technical information, see the Intel® Server Chassis

SR2400 Technical Product Specification. See “Additional Information and Software” to find a Web link to

this document.

Your Server Chassis SR2400 shipped with the following items 2:

A box of hardware components, referred to below as the “hardware box”

One 700W power supply, installed in the chassis

Low-profile PCI-X riser, installed in the chassis

CD-ROM / DVD drive tray, installed in the chassis

Four system fans, installed in the chassis

Chassis intrusion switch, installed in the chassis

Air baffle, installed in the chassis

Processor air duct, installed in the chassis

CD-ROM filler panel, in the hardware box

Floppy carrier assembly, in the hardware box

Six 32- 8mm screws, in the hardware box

Cables, in the hardware kit box

Rack handles, in the hardware box

Intel® Server Chassis SR2400 Quick Start User’s Guide, in the chassis box

Attention document, in the chassis box

You must have one item from each of the following groups 3:

Riser option, choose one:

Full-height PCI-X riser

Full-height performance PCI-X riser

Full-height PCI-Express* riser

Hard drive installation option kit, choose one:

SCSI hot-swap backplane kit

SATA hot-swap backplane kit

Fixed SATA drive kit

Control panel, choose one:

Standard control panel

Intel®Local Control Panel 4

2The contents list includes only items included with the Intel Server Chassis SR2400. This list does not

include items that are shipped and pre-installed in the Intel Server Platform SR2400JR2.

3Before purchasing any required options, refer to your server board documentation to determine which

option(s) are supported on your server board.

4The Intel®Local Control Panel requires the installation of the optional Intel® Management Module –

Professional or Intel® Management Module – Advanced

Preface

You may also need or want to purchase one or more of the following items for your server: 5

Server rack cabinet and rails / brackets to mount the server into a rack

Cable management arm

Front bezel for the selected control panel option

Processor(s) and heat sink(s)

Memory DIMMs

Intel®Management Module (Advanced or Professional)

Tape drive kit

Redundant fan kit (includes four fans)

Redundant 700W power supply

Sixth drive SCSI or SATA kit

Slimline CD-ROM drive or DVD-ROM drive

Slimline floppy drive

Kit to convert a hard drive bay to a floppy drive bay

For information about which of these items have been tested and can be used with your chassis, and

for ordering information for Intel products, see

http://www.support.intel.com/support/motherboards/server/chassis/SR2400/

5Before purchasing any optional items, refer to your server board documentation to determine which items

are supported on your server board.

Additional Information and Software

If you need more information about this product or information about the accessories that can be

used with this server board, use the following resources.

These sources are available at

http://support.intel.com/support/motherboards/server/chassis/SR2400/

Unless otherwise indicated in the table below, once on this Web page, type the document or

software name in the search field at the left side of the screen and select the option to search “This

Product.”

For this information or software Use this Document or Software

For in-depth technical information

about this product, including BIOS

settings and chipset information

Technical Product Specification

If you just received this product and

need to install it Intel® Server Chassis SR2400 Quick Start User’s Guide in the product box

For virtual system tours and

interactive repair information A link to the SMaRT Tool is available under “Other Resources” at the right side

of the screen

Accessories or other Intel server

products Search for “Spares and Configuration Guide”

Hardware (peripheral boards,

adapter cards) and operating

systems that have been tested with

this product

Search for “Tested Hardware and Operating System List”

Server boards that have been

tested with this product Search for “Compatible Server Board”

Processors that have been tested

with this product See your server board documentation

DIMMs that have been tested with

this product See your server board documentation

To make sure your system falls

within the allowed power budget See your server board documentation

For software to manage your Intel®

server See your server board documentation

For drivers See your server board documentation

For firmware and BIOS updates See your server board documentation

For diagnostics test software See your server board documentation

Preface

vii

Safety Information

WARNING

Before working with your server product, whether you are using this guide or any other

resource as a reference, pay close attention to the safety instructions. You must adhere to the

assembly instructions in this guide to ensure and maintain compliance with existing product

certifications and approvals. Use only the described, regulated components specified in this

guide. Use of other products / components will void the UL listing and other regulatory

approvals of the product and will most likely result in noncompliance with product

regulations in the region(s) in which the product is sold.

Emissions Disclaimer

To ensure EMC compliance with your local regional rules and regulations, the final configuration

of your end system product may require additional EMC compliance testing. For more information

please contact your local Intel Representative.

See “Regulatory and Integration Information” for product Safety and EMC regulatory compliance

information. This is an FCC Class A device. Integration of it into a Class B chassis does not result

in a Class B device.

Intended Uses

This product was evaluated as Information Technology Equipment (ITE), which may be installed in

offices, schools, computer rooms, and similar commercial type locations. The suitability of this

product for other product categories and environments (such as: medical, industrial,

telecommunications, NEBS, residential, alarm systems, test equipment, etc.), other than an ITE

application, may require further evaluation.

EMC Testing

Before computer integration, make sure that the chassis, power supply, and other modules have

passed EMC testing using a server board with a microprocessor from the same family (or higher)

and operating at the same (or higher) speed as the microprocessor used on this server board.

viii

Warnings

System power on/off: The power button DOES NOT turn off the system

AC power. To remove power from system, you must unplug the AC power

cord from the wall outlet. Make sure the AC power cord is unplugged before

you open the chassis, add, or remove any components.

Hazardous conditions, devices and cables:Hazardous electrical

conditions may be present on power, telephone, and communication cables.

Turn off the server and disconnect the power cord, telecommunications

systems, networks, and modems attached to the server before opening it.

Otherwise, personal injury or equipment damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can

damage disk drives, boards, and other parts. We recommend that you

perform all procedures in this chapter only at an ESD workstation. If one is

not available, provide some ESD protection by wearing an antistatic wrist

strap attached to chassis groundany unpainted metal surfaceon your

server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be

extremely sensitive to ESD. Hold boards only by their edges. After removing

a board from its protective wrapper or from the server, place the board

component side up on a grounded, static free surface. Use a conductive foam

pad if available but not the board wrapper. Do not slide board over any

surface.

Installing or removing jumpers: A jumper is a small plastic encased

conductor that slips over two jumper pins. Some jumpers have a small tab on

top that you can grip with your fingertips or with a pair of fine needle nosed

pliers. If your jumpers do not have such a tab, take care when using needle

nosed pliers to remove or install a jumper; grip the narrow sides of the

jumper with the pliers, never the wide sides. Gripping the wide sides can

damage the contacts inside the jumper, causing intermittent problems with

the function controlled by that jumper. Take care to grip with, but not

squeeze, the pliers or other tool you use to remove a jumper, or you may

bend or break the stake pins on the board.

Preface

Safety Cautions

Read all caution and safety statements in this document before performing any of the instructions.

See also Intel Server Boards and Server Chassis Safety Information at

http://support.intel.com/support/motherboards/server/sb/CS-010770.htm.

The power supply in this product contains no user-serviceable parts. There may be

more than one supply in this product. Refer servicing only to qualified personnel.

Do not attempt to modify or use the supplied AC power cord if it is not the exact type

required. A product with more than one power supply will have a separate AC power

cord for each supply.

The power button on the system does not turn off system AC power. To remove AC

power from the system, you must unplug each AC power cord from the wall outlet or

power supply.

The power cord(s) is considered the disconnect device to the main (AC) power. The

socket outlet that the system plugs into shall be installed near the equipment and shall

be easily accessible.

SAFETY STEPS: Whenever you remove the chassis covers to access the inside of

the system, follow these steps:

1. Turn off all peripheral devices connected to the system.

2. Turn off the system by pressing the power button.

3. Unplug all AC power cords from the system or from wall outlets.

4. Label and disconnect all cables connected to I/O connectors or ports on the

back of the system.

5. Provide some electrostatic discharge (ESD) protection by wearing an

antistatic wrist strap attached to chassis ground of the system—any

unpainted metal surface—when handling components.

6. Do not operate the system with the chassis covers removed.

After you have completed the six SAFETY steps above, you can remove the system

covers. To do this:

1. Unlock and remove the padlock from the back of the system if a padlock has

been installed.

2. Remove and save all screws from the covers.

3. Remove the covers.

For proper cooling and airflow, always reinstall the chassis covers before turning on

the system. Operating the system without the covers in place can damage system

parts. To install the covers:

1. Check first to make sure you have not left loose tools or parts inside the

system.

2. Check that cables, add-in boards, and other components are properly

installed.

3. Attach the covers to the chassis with the screws removed earlier, and tighten

them firmly.

4. Insert and lock the padlock to the system to prevent unauthorized access

inside the system.

5. Connect all external cables and the AC power cord(s) to the system.

A microprocessor and heat sink may be hot if the system has been running. Also,

there may be sharp pins and edges on some board and chassis parts. Contact should

be made with care. Consider wearing protective gloves.

Danger of explosion if the battery is incorrectly replaced. Replace only with the same

or equivalent type recommended by the equipment manufacturer. Dispose of used

batteries according to manufacturer’s instructions.

The system is designed to operate in a typical office environment. Choose a site that

is:

Clean and free of airborne particles (other than normal room dust).

Well ventilated and away from sources of heat including direct sunlight.

Away from sources of vibration or physical shock.

Isolated from strong electromagnetic fields produced by electrical devices.

In regions that are susceptible to electrical storms, we recommend you plug

your system into a surge suppresser and disconnect telecommunication lines

to your modem during an electrical storm.

Provided with a properly grounded wall outlet.

Provided with sufficient space to access the power supply cord(s), because

they serve as the product’s main power disconnect.

Andere Handbücher für SR2400

Inhaltsverzeichnis

Andere Intel Chassis Handbücher

Intel

Intel Astor II Bedienungsanleitung

Intel

Intel P4000S Series Bedienungsanleitung

Intel

Intel SR2600URLX Handbuch

Intel

Intel Columbus II Bedienungsanleitung

Intel

Intel SC5300BRP Konfigurationshandbuch

Intel

Intel P4304XXMFEN2 Bedienungsanleitung

Intel

Intel H2000G Series Bedienungsanleitung

Intel

Intel SC5600LX - Server Chassis - Tower Bedienungsanleitung

Intel

Intel H2000 Series Bedienungsanleitung

Intel

Intel Chassis SR1450 Bedienungsanleitung

Intel

Intel SC5000 Bedienungsanleitung

Intel

Intel SC5100 - Server Chassis Rack Optimized Hot Swap Redundant... Bedienungsanleitung

Intel

Intel P4000 - 11-2010 Bedienungsanleitung

Intel

Intel SC5300 Bedienungsanleitung

Intel

Intel S3210SHLC - Entry Server Board Motherboard Bedienungsanleitung

Intel

Intel SR1425BK1 - Entry Server Platform Bedienungsanleitung

Intel

Intel SC5295DP Einrichtungshandbuch

Intel

Intel iSBC 655 Kurzanleitung

Intel

Intel SE7500WV2 - Server Chassis - SR2300 Bedienungsanleitung

Intel

Intel SR2400 Konfigurationshandbuch

Intel

Intel SC5400BASE Referenzhandbuch

Intel

Intel SC5400LX Bedienungsanleitung

Intel

Intel C50277-001 Bedienungsanleitung

Intel

Intel P4304XXMFEN2 Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Chenbro

Chenbro RB13804N4WFT Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung