Intel DH61AGL Bedienungsanleitung

Andere Handbücher für DH61AGL

1

Dieses Handbuch passt für folgende Modelle

13

Inhaltsverzeichnis

Andere Intel Hauptplatine Handbücher

Intel

Intel Desktop Board D525MW Bedienungsanleitung

Intel

Intel D815EEA2 Konfigurationshandbuch

Intel

Intel D915GLVG Bedienungsanleitung

Intel

Intel DG965MQ Bedienungsanleitung

Intel

Intel D945GTP Bedienungsanleitung

Intel

Intel DH61BE Bedienungsanleitung

Intel

Intel DG33TL Bedienungsanleitung

Intel

Intel DH61SA Bedienungsanleitung

Intel

Intel BOXDX58OG Bedienungsanleitung

Intel

Intel D815EEA Konfigurationshandbuch

Intel

Intel DP965LT Bedienungsanleitung

Intel

Intel DG965WH Bedienungsanleitung

Intel

Intel Enano-8523 Bedienungsanleitung

Intel

Intel BOXDG41AN Konfigurationshandbuch

Intel

Intel KEMX-2030 Bedienungsanleitung

Intel

Intel BLKDG41TX Konfigurationshandbuch

Intel

Intel BOXDX38BT - 1333 1066FSB DDR3 Audio Lan Raid SATA ATX 10Pack... Bedienungsanleitung

Intel

Intel D945GCPE - Desktop Board Motherboard Bedienungsanleitung

Intel

Intel D945GCCR Bedienungsanleitung

Intel

Intel Thin Mini-ITX Leitfaden

Intel

Intel D865PERL Bedienungsanleitung

Intel

Intel BLKD945GCNL Konfigurationshandbuch

Intel

Intel Desktop Board D915PSY Bedienungsanleitung

Intel

Intel DQ965WC Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Intel®Smart Response Technology User Guide

Note: This feature requires that the SATA controller be set to RAID mode via the

system BIOS.

Intel®Smart Response Technology is an Intel®Rapid Storage Technology (Intel®RST) caching

feature that improves computer system performance. It allows a user to configure computer

systems with a Solid State Drive (SSD) used as cache memory between the hard disk drive and

system memory. This provides the advantage of having a hard disk drive (or a RAID volume) for

maximum storage capacity while delivering an SSD-like overall system performance experience.

Intel®Smart Response Technology caching is implemented as a single drive letter solution; no

additional drive letter is required for the SSD device used as cache.

System Requirements:

For a system to support Intel Smart Response Technology it must have the following:

•Intel®Z68/Z77/H77/Q77 Express Chipset-based desktop board

•Intel®Core™ Processor in the LGA1155 package

•System BIOS with SATA mode set to RAID

•Intel Rapid Storage Technology software 10.5 version release or later

•Single Hard Disk Drive (HDD) or multiple HDD’s in a single RAID volume

•Solid State Drive (SSD) with a minimum capacity of 18.6GB

•Operating system: Microsoft Windows Vista* (32-bit and 64-bit editions), Microsoft

Windows* 7 (32-bit and 64-bit editions)

Setup Guide

Configure SATA Mode in BIOS Setup

1. Press the F2 key during boot up to enter the BIOS setup menu

2. Go to Configuration > SATA Drives

3. Select the setting for Chipset SATA Mode and change the value to RAID

4. Press the F10 key to save settings and restart the system

Operating System Installation

5. You may now begin installation of the operating system on the HDD (or RAID volume)

6. Install all required device drivers

7. Install the Intel Rapid Storage Technology software version 10.5 or later

Enabling Intel Smart Response Technology

Note: The Intel RST software denotes Intel Smart Response Technology as Accelerate

8. Run the Intel RST software through the All Programs menu or the task bar icon.

9. Click “Enable acceleration” either under “Status” or “Accelerate”.

10. Select the SSD to be used as a cache device.

11. Select the size from the SSD to be allocated for the cache memory.

Note: Any remaining space on the SSD may be used for data storage using the simple

data single-disk RAID 0 volume that is automatically created.

12. Select the HDD (or RAID volume) to be accelerated. It is highly recommended to

accelerate the system volume or system disk for maximum performance.

13. Select the acceleration mode, and then click “OK”. By default, Enhanced mode is

selected.

Note: Enhanced mode (default): Acceleration optimized for data protection.

Maximized mode: Acceleration optimized for input/output performance.

14. The page refreshes and reports the new acceleration configuration in the Acceleration

View.

15. Congratulations! Your system is now successfully configured with the Intel Smart

Response Technology!

* Other names, brands, and logos may be claimed as the property of others.

Intel, the Intel logo, Intel Core, and Core Inside are trademarks of Intel Corporation in the U.S. and/or other countries.

Copyright © 2011, 2012 Intel Corporation. All rights reserved.