Intel SR1630GP - Server System - 0 MB RAM Bedienungsanleitung

Intel® Server System SR1630GP /

SR1630HGP Service Guide

A Guide for Technically Qualified Assemblers of Intel®Identified Subassemblies/

Products

Intel Order Number E73400-004

ii Intel® Server System SR1630GP / SR1630HGP Service Guide

Disclaimer

Information in this document is provided in connection with Intel®products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's

Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any

express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property

right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where

personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,

without notice.

Intel server boards contain a number of high-density VLSI and power delivery components that need adequate

airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these

components when the fully integrated system is used together. It is the responsibility of the system integrator that

chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to

determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation

can not be held responsible if components fail or the server board does not operate correctly when used outside any

of their published operating or non-operating limits.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United

States and other countries.

* Other names and brands may be claimed as the property of others.

Intel® Server System SR1630GP / SR1630HGP Service Guide iii

Safety Information

Important Safety Instructions

Read all caution and safety statements in this document before performing any of the

instructions. See also Intel Server Boards and Server Chassis Safety Information on the

Intel®Server Deployment Toolkit CD and/or at http://support.intel.com/support/

motherboards/server/sb/cs-010770.htm.

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor

Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu

Intel-Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit CD

oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce

document avant de suivre toute instruction. Consultez Intel Server Boards and Server

Chassis Safety Information sur le Intel®Server Deployment Toolkit CD ou bien rendez-

vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar

cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety

Information en el Intel®Server Deployment Toolkit CD y/o en http://support.intel.com/

support/motherboards/server/sb/cs-010770.htm.

iv Intel® Server System SR1630GP / SR1630HGP Service Guide

Intel® Server System SR1630GP / SR1630HGP Service Guide v

Warnings

Heed safety instructions: Before working with your server product, whether you are

using this guide or any other resource as a reference, pay close attention to the safety

instructions. You must adhere to the assembly instructions in this guide to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products /

components will void the UL listing and other regulatory approvals of the product and

will most likely result in noncompliance with product regulations in the region(s) in which

the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To

remove power from system, you must unplug the AC power cord from the wall outlet.

Make sure the AC power cord is unplugged before you open the chassis, add, or remove

any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the server and

disconnect the power cord, telecommunications systems, networks, and modems attached

to the server before opening it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this chapter

only at an ESD workstation. If one is not available, provide some ESD protection by

wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on

your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensitive to ESD. Hold boards only by their edges. After removing a board from its

protective wrapper or from the server, place the board component side up on a grounded,

static free surface. Use a conductive foam pad if available but not the board wrapper. Do

not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that you can grip with your

fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,

take care when using needle nosed pliers to remove or install a jumper; grip the narrow

sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can

damage the contacts inside the jumper, causing intermittent problems with the function

controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool

you use to remove a jumper, or you may bend or break the pins on the board.

vi Intel® Server System SR1630GP / SR1630HGP Service Guide

Intel® Server System SR1630GP/SR1630HGP Service Guide vii

Preface

About this Manual

Thank you for purchasing and using the Intel® Server System SR1630GP/SR1630HGP.

This manual is written for system technicians responsible for troubleshooting, upgrading,

and repairing this server system. This document provides reference information, feature

information, and step-by-step instructions on how to add and replace components on the

server system. For the latest version of this manual, see http://support.intel.com/support/

motherboards/server/S3420GP/.

Manual Organization

Chapter 1 provides an overview of the server system. In this chapter, you will find a list of

the server system features, illustrations of the product, and product diagrams to help you

identify components and their locations.

Chapter 2 provides instructions on using the utilities shipped with the board or that may be

required to update the system. This includes how to navigate through the BIOS Setup

screens, perform a BIOS update, and reset the password or CMOS. Information about the

specific BIOS settings and screens is available in the Intel®Server Board S3420GP

Technical Product Specification.

Chapter 3 provides instructions on adding and replacing components. Use this chapter for

step-by-step instructions and diagrams for installing or replacing components such as the

fans, power supply, drives, and other components.

At the back of this manual, you will find technical specifications, troubleshooting tips,

regulatory information, complete safety information, “getting help” information, and the

warranty.

viii Intel® Server System SR1630GP/SR1630HGP Service Guide

Product Contents

The Intel® Server System SR1630GP/SR1630HGP ships with the Intel®Server Board

S3420GPLC.

There are two versions of this server system: the Intel®Server System SR1630GP and the

Intel®Server System SR1630HGP. The contents of each server system are listed below.

Intel®Server System SR1630GP Contents

Your Intel®Server System SR1630GP ships with the following items:

•One Intel®Server Board S3420GPLC installed in the server system

•One 350-W power supply module, installed in the server system

•Two system blower fans, with attached cables, installed in the server system:

•One passive heat sink, mounted in the HDD0 position, next to the blower fans in the

server system

•One hard disk drive 0 bracket, in the server system product box

•One hard disk drive 1 bracket, installed in the server system

•One slimline optical drive installation kit, in the server system product box

•One PCI-E x 8 low profile riser card with supporting bracket, installed in the server

system.

•Screws:

— 6-32# screws for attaching the slimline optical drive to the chassis.

— 6-32# screws for attaching hard disk drives to the hard disk drive brackets and

attaching hard disk drive 0 bracket to the chassis.

— Four M2 screws for attaching the brackets to the slimline optical drive

•Rack handles, in the server system product box

•Standard front panel, installed in the server system

•One rail kit, in a separate box

•Cables:

— Two SATA cables, installed in the server system

— One front panel USB cable, installed in the server system

— One front panel cable, installed in the server system

•Documentation, drivers, and installation CD

Intel® Server System SR1630GP/SR1630HGP Service Guide ix

Intel®Server System SR1630HGP Contents

Your Intel®Server System SR1630HGP ships with the following items:

•One Intel®Server Board S3420GPLC installed in the server system

•One 350-W power supply module, installed in the server system

•Two system blower fans, with attached cables, installed in the server system:

•One passive heat sink, mounted behind the hard drives, next to the blower fans in the

server system

•Three hot-swap hard disk drive carriers, installed in the server system.

•One air baffle in the server system product box.

•One slimline optical drive installation kit, in the server system product box.

•One PCI-E x 8 low profile riser card with supporting bracket, installed in the server

system.

•Screws:

— One M2 screw for attaching the bracket to slim optical drive.

— One M3 screw for attaching the slim optical drive to the server system.

— One 6-32# screw for attaching the air baffle to the serve system.

•Rack handles, in the server system product box

•Standard front panel, installed in the server system

•Standard HDD backplane, installed in the server system.

•One rail kit, in a separate box

•Cables:

— Three SATA cables, installed in the server system

— One front panel USB cable, installed in the server system

— One front panel cable, installed in the server system

— One SPGIO cable, installed in the server system.

•Documentation, drivers, and installation CD

xIntel® Server System SR1630GP/SR1630HGP Service Guide

Server System References

If you need more information about this product or information about the accessories that

you can use with this server chassis, use the following resources.

For this Information or

Software Use this Document or Software

Technical information

about the server chassis,

including sub-system

overviews and

mechanical drawings

Intel® Server System SR1630GP/SR1630HGP Technical Product

Specification

http://support.intel.com/support/motherboards/server/S3420GP/

Intel® Server Board S3420GP Technical Product Specification

http://support.intel.com/support/motherboards/server/S3420GP/

If you just received this

product and need to

install it

Intel® Server System SR1630GP/SR1630HGP Quick Start User's

Guide in the product box.

Accessories or other Intel

server products Spares/Parts List & Configuration Guide

This is available from your Intel field representative or on the Server

Configurator Tool at:

http://www.intel.com/support/motherboards/server/s3420gp/

howto.htm

Hardware (peripheral

boards, adapter cards)

and operating systems

that have been tested with

this product

For the Tested Hardware Operating Systems List, you can go to the

Intel®Server Configurator Tool:

http://serverconfigurator.intel.com/default.aspx

Processors that have

been tested with this

product

Supported processors can be found at:

http://support.intel.com/support/motherboards/server/S3420GP/

DIMMs that have been

tested with this product Supported memory can be found at:

http://support.intel.com/support/motherboards/server/S3420GP/

Tomakesureyoursystem

falls within the allowed

power budget

Power Budget Tool

http://support.intel.com/support/motherboards/server/S3420GP/

For software to manage

your Intel®server Intel®System Management

http://support.intel.com/support/motherboards/server/S3420GP/

For drivers Driver (for an extensive list of drivers available)

Operating System Driver (for operating system drivers)

http://support.intel.com/support/motherboards/server/S3420GP/

For firmware and BIOS

updates Firmware can be found at:

http://support.intel.com/support/motherboards/server/S3420GP/

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intel Server Handbücher

Intel

Intel P4000RP Bedienungsanleitung

Intel

Intel R2000BB series Bedienungsanleitung

Intel

Intel R1000WF Series Bedienungsanleitung

Intel

Intel SR1670HV - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR1530CL - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel Dialogic Bedienungsanleitung

Intel

Intel SR1625UR - Server System - 0 MB RAM Konfigurationshandbuch

Intel

Intel M70KLP Series Bedienungsanleitung

Intel

Intel R1304BTSSFAN Bedienungsanleitung

Intel

Intel SR1630BC - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR2600UR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR6850HW4M Bedienungsanleitung

Intel

Intel SC5650HCBRP Betriebsanleitung

Intel

Intel S2600WF Series Konfigurationshandbuch

Intel

Intel SR1435VP2 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SR9000MK4U - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR1550AL - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR2600URLXNA Leitfaden

Intel

Intel SR1530CLR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel ASR1500PASBP Bedienungsanleitung

Intel

Intel R1000SP Bedienungsanleitung

Intel

Intel SR1520ML - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel MFSYS35 Bedienungsanleitung

Intel

Intel SR1530HSH - Server System - 0 MB RAM Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung