Intel OPEN 660 120 Bedienungsanleitung
OPEN (660) 120/140/150 II
12.1" /14.1" /15.1" TFT
Intel®Celeron/Pentium®III
Multimedia Open-frame Panel PC
User’s Manual (version 2.1)
Copyright Notice
This document is copyrighted, 2001 by the Manufacturer.
The information provided in this document has been
carefully checked and is accurate at the time of publication.
However, the Manufacturer assumes no responsibility for
any infringements of patents or other rights of third parties
that may result from its use.
No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form of or via any
means without the prior written permission of the
Manufacturer. Further, this publication and features
described herein are subject to change without notice.
Trademarks
All brand and product names used for identification in this
document are trademarks or registered trademarks of their
respective companies.
© Copyright 2001, Feb. Version 2.1
All rights reserved.
Printed in Taiwan
Unpacking
After unpacking the OPEN (660) system carton, check
and see if the following items are included and in good
condition.
lOPEN (660) 120/140/150 II main system x 1
lAccessories
-Power cord x 1
-External FDD cable x 1
-External IDE cable x 1
-External FDD & HDD power cable x 1
-User manual diskette in .pdf format x 1
-Utilities & drivers diskettes x 6
-Touchscreen drivers x 1 set
or utilities and drivers CD diskette x 1
(for touchscreen drivers, please download the
updated drivers from the following website
http://www.microtouch.com or
http://www.elotouch.com
-Mounting kit for system mounting x 2 sets
-Screw packet
lWarranty card
Make sure that all of the items listed above are present. If
any of the above items is missing, contact your dealer
immediately.
Warranty
All products manufactured by the manufacturer are
warranted against defective materials for one year starting
from the date of delivery to the original purchaser.
Important Safety Precautions
Before getting started, read these instructions and save
them for later reference.
1. Turn off the computer before cleaning. Clean with a
damp or dry cloth only. Do not spray any liquid cleaner
on screen directly.
2. The power outlet socket used to plug in the computer
power cord must be located near the system and easily
accessible. Do not use outlets on the same circuit of
the systems that regularly switched on and off.
3. Make sure the voltage of the power source is correct
before connecting the computer to the power outlet.
4. If the computer is sharing an extension cord with other
devices, make sure the total ampere rating of the
devices plugged into the extension cord does not
exceed the cord’s ampere rating.
5. Do not expose the power cord, extension cord and
power outlet to moisture.
6. Install the computer on a reliable surface to prevent
damage caused by dropping.
7. This computer is not equipped with an operating
system. An operating system must be loaded first
before installing any software into the computer.
8. Disconnect the power cord from the computer before
any installation. Make sure both the computer and the
external devices are turned off. The sudden surge of
power may ruin any sensitive components. Also make
sure the computer is properly grounded.
9. During installation of any internal components, be sure
to ground yourself to keep from any static charge.
Most electronic components are sensitive to the static
electric charge. Use a grounding wrist strap and place
all electronic components in any static-shielded
devices.
10. The openings on the computer enclosure are for the
cabin ventilation to prevent the computer from
overheating. DO NOT COVER THE OPENINGS.
11. The brightness of the flat panel display will decrease
with use. However, hours of use will vary depending on
the application environment.
12. If the computer is equipped with a touch panel, avoid
using sharp objects to operate the touch panel.
Scratches on the touch panel may cause mal-
calibration or non-function to the panel.
13. The LCD panel display is not subject to shock or
vibration. When assembling the computer, make sure
it is securely installed.
Table of Contents
1. INTRODUCTION............................................. 1-1
1.1. GENERAL INFORMATION ..................................1-2
1.2. WHAT COVERS IN THIS MANUAL.........................1-3
1.3. SPECIFICATIONS ...........................................1-5
1.4. DIMENSIONS ...............................................1-9
1.5. OPTIONAL MODULES & ACCESSORIES................1-11
1.5.1. Touchscreen Module .............................1-11
2. IDENTIFYING THE SYSTEM COMPONENTS... 2-13
2.1. FRONT VIEW .............................................2-14
2.2. SIDE VIEWS..............................................2-15
2.3. I/O OUTLETS ............................................2-16
2.4. SYSTEM MAJOR PARTS..................................2-18
2.5. SYSTEM SETUP FOR THE FIRST-TIME USE............2-19
2.5.1. Installation Procedures..........................2-19
2.5.2. Running the BIOS Setup .......................2-20
2.5.3. Operating System and Driver Installation 2-21
3. MOUNTING OPTIONS................................... 3-23
3.1. DIFFERENT FRONT BEZELS .............................3-24
3.1.1. OPEN (660) system with Small Bezel......3-24
3.1.2. OPEN (660) system with Big Bezel .........3-25
3.1.3. Aluminum Alloy Frame..........................3-26
3.2. METAL FIXTURES ........................................3-27
3.2.1. Metal Fixture A....................................3-27
3.2.2. Metal Fixture B.....................................3-28
3.3. FRONT MOUNTING.......................................3-29
3.3.1. Front Mounting with Touchscreen Module 3-29
3.3.2. Front Mounting w/o Touchscreen Module.3-30
3.4. REAR MOUNTING ........................................3-32
3.4.1. Fixing on the Enclosure’s front panel.......3-33
3.4.2. Fixing on the Enclosure’s back panel.......3-34
3.5. PANEL MOUNTING .......................................3-36
4. SYSTEM HARDWARE INSTALLATION ........... 4-37
4.1. INSTALLING THE CPU...................................4-39
4.2. INSTALLING THE SDRAM MEMORY MODULE ........4-40
4.3. INSTALLING THE HDD ..................................4-41
4.3.1. OPEN 120/140 2.5" HDD Installation ......4-41
4.3.2. OPEN 150 3.5" HDD Installation............4-42
4.4. INSTALLING THE FDD...................................4-43
4.4.1. External FDD connection .......................4-43
4.4.2. Internal FDD installation for OPEN 150....4-44
4.5. INSTALLING THE CD-ROM DRIVE.....................4-45
4.5.1. External CD-ROM connection .................4-45
4.5.2. Installing Internal CD-ROM for OPEN 150 4-46
4.6. EXPANSION SLOT........................................4-47
5. I/O CONNECTION........................................ 5-49
5.1. VGA INTERFACE.........................................5-50
5.2. COM PORTS X 4........................................5-51
5.3. PARALLEL PORT ..........................................5-53
5.4. 100/10 BASE-T ETHERNET (RJ-45)................5-53
5.5. USB PORTS..............................................5-54
5.6. AUDIO INTERFACE .......................................5-54
5.7. EXTERNAL FDD (DB-15) .............................5-55
5.8. +5V/12V DC-OUT ....................................5-56
5.9. PS/2 KEYBOARD INTERFACE...........................5-56
5.10. PS/2 MOUSE ............................................5-56
5.11. AC/DC INLET/POWER SWITCH .......................5-56
6. SYSTEM CONTROL BOARD ........................... 6-57
6.1. INTRODUCTION ..........................................6-58
6.1.1. General Information .............................6-58
6.1.2. Features..............................................6-59
6.1.3. Specifications.......................................6-60
6.1.4. Board Placement & Dimension ...............6-62
6.2. LOCATING JUMPERS & CONNECTORS .................6-63
6.2.1. Jumpers & Jumper Setting.....................6-64
6.2.1.1. DOC 2000 Address Setting (JP9).......6-65
6.2.1.2. COM 2 RS-232/485 Setting (JP3,5,6) 6-65
6.2.1.3. CMOS Clear Setting (JP4) ................6-66
6.2.1.4. LCD Power Setting (JP1)..................6-66
6.2.2. Connectors & Pin Assignment.................6-67
6.2.2.1. CN12: Main Power Connector ...........6-68
6.2.2.2. CN2/IDE1: IDE Connector................6-69
6.2.2.3. CN3/CN1: Flat Panel Connector ........6-71
6.2.2.4. CN5: IR and Serial Ports Connector...6-73
6.2.2.5. CN7: Digital I/O Connector ..............6-74
6.2.2.6. CN8: KB, MS, USB & PRT Connector..6-75
6.2.2.7. CN10: CD Audio Input Connector......6-76
6.2.2.8. CN9: Audio, LAN, VGA CRT & LED ....6-76
6.2.2.9. CN6: Video Interface Connector........6-77
6.2.2.10. FDC1: FDD Connector .....................6-78
6.2.2.11. FAN1: FAN Connector......................6-78
6.2.2.12. CN4: PCI/ISA Expansion Slot ...........6-79
7. AWARD BIOS SETUP.................................... 7-83
7.1. AWARD BIOS............................................7-84
7.2. CONTROL KEY DEFINITION.............................7-85
7.3. GETTING HELP ...........................................7-86
7.3.1. Main Menu...........................................7-86
7.4. AWARD BIOS SETUP .................................7-87
7.4.1. AWARD BIOS Setup Main Menu..............7-87
7.4.2. Standard CMOS Setup ..........................7-89
7.4.3. BIOS Features Setup ............................7-92
7.4.4. Chipset Features Setup.........................7-93
7.4.5. Power Management Setup.....................7-94
7.4.6. PnP/PCI Configuration...........................7-95
7.4.7. Load BIOS Defaults ..............................7-96
7.4.8. Load Setup Defaults .............................7-97
7.4.9. Integrated Peripherals Setup .................7-98
7.4.10. User Password .....................................7-99
7.4.11. IDE HDD Auto Detection......................7-100
7.4.12. Save and Exit Setup ...........................7-101
7.4.13. Exit Without Saving............................7-101
8. SOFTWARE DRIVERS INTRODUCTIONS ..... 8-103
8.1. ETHERNET DRIVERS...................................8-104
8.1.1. Features............................................8-104
8.2. OPEN (660) PCI XGA SETUP ...................8-105
8.3. AUDIO SETUP ..........................................8-106
8.4. DRIVER INSTALLATION ................................8-107
9. TOUCHSCREEN........................................... 9-109
9.1. MICROTOUCH TOUCH DRIVER INSTALLATION......9-110
9.1.1. Two types of MicroTouch touchscreens..9-110
9.1.2. TouchWare–MicroTouch Software.........9-111
9.1.3. Installing TouchWare..........................9-113
9.1.4. Uninstalling TouchWare.......................9-115
9.1.5. Calibrate the MicroTouch Touchscreen ..9-116
9.1.6. Getting More Information....................9-117
9.2. ELO TOUCHSCREEN DRIVER INSTALLATION ........9-118
9.2.1. System Requirements.........................9-118
9.2.2. About Elo Software.............................9-119
9.2.3. Installation........................................9-120
9.2.4. Installing MonitorMouse for Win 95.......9-125
9.2.5. Installing MonitorMouse for Win NT ......9-129
9.2.6. Getting More Information....................9-131
APPENDIX .....................................................9-132
A: LCD SPECIFICATION.........................................9-132
B: PROGRAMMING THE WATCHDOG TIMER....................9-139
C: DISKONCHIPINSTALLATION..............................9-141
D: RS-485 PROGRAMMING ....................................9-143
E: SYSTEM I/O PORTS..........................................9-144
F: FIRST MB MEMORY MAP.....................................9-145
G: POWER SUPPLY ...............................................9-146
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere Intel Touchscreen Handbücher
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
