Intelix Intelix DIGI-VGASD-R Bedienungsanleitung

Intelix DIGI-VGASD-R

Installation Manual

Introduction

The Intelix DIGI-VGASD-R active receiver balun transmits VGA video,

stereo audio, and IR or RS232 up to 350 feet over a single twisted pair cable.

The unit features dual amplified outputs and adjustable video equalization.

When used with a compatible Intelix send balun, the DIGI-VGASD-R

provides 1600 x 1200 video performance and 20 Hz to 20 kHz, hi-fidelity

audio performance.

The unit requires power and includes a 5V power supply.

Installation

To install the Intelix DIGI-VGASD-R balun, perform the following steps:

1. Identify the pin configuration of the baluns and RJ45 connectors on the

twisted pair cabling. To eliminate crosstalk, the pin configuration must

follow the EIA/TIA 568B standard. Please ensure that wiring is straight-

through.

2. Power-off the connecting audio, video, and control equipment.

3. Connect a compatible send balun to the VGA output of the video source,

the audio output of the audio source, and an IR or RS232 control source.

Do not connect the 5V power supply.

Note the DIGI-VGASD-R does not support IR and RS232

simultaneously. If both signals are connected, IR will take precedence

over RS232.

4. Connect the DIGI-VGASD-R receive balun to the VGA input of the video

destination, the audio input of the audio destination, and an IR or RS232

control destination. If required, connect a second video destination. Do not

connect the 5V power supply.

5. Complete the connection between the send and receive baluns using one

run of twisted pair cable. Ensure there are no split pairs or taps.

6. Connect the 5V power supply to the send balun.

Compatible Intelix send baluns include:

DIGI-VGASD-WP-S wallplate send balun

DIGI-VGASD-S modular send balun

DIGI-VGASD-T4 1 input by 4 output modular send balun

DIGI-VGASD-T8 1 input by 8 output modular send balun

7. Connect the 5V power supply to the DIGI-VGASD-R receive balun.

8. Power-on the connecting audio, video, and control equipment.

9. Verify picture quality. If necessary, adjust the signal using the blue, green,

and red dials on the DIGI-VGASD-R receive balun.

Warning! Do not use any IR receiver (eye) or IR emitter other than those

sold exclusively for the DIGI-VGASD series of products to prevent damage

to the balun. Using 12V-

ased IR components may permanently damage the

IR circuitry of the product and void the warranty.

Required IR Emitter: Intelix DIGI-VGASD-IREMT

Required IR Receiver: Intelix DIGI-VGASD-IREYE

Example System

Troubleshooting

Symptom Causes Possible Solutions

No signal No continuity in

video link

Verify cable continuity between pairs of

baluns.

Verify the max distance has not been

exceeded.

Verify the audio, video, and control

cables between the equipment and

hardware are connected and pass signal.

No signal Power off Check power supplies of video

equipment.

Verify the LEDs on both the send and

receive units are illuminated.

No signal Improper

connection or

swapped pairs

Check that baluns are connected to

correct video inputs and outputs.

Verify both ends of the twisted pair

cable conform to the EIA 568B crimp

pattern.

Unusual colors

Rolling signal

Horizontal

video bars

Improper

grounding or

cable type

Verify the source and destination

devices are grounded. Different

electrical circuits may cause a voltage

differential on the building’s electrical

ground plain. The video display or

source deceive may need to be

grounded.

No control Simultaneous

RS232 and IR

Verify only IR or RS232 are being used.

Background

pattern

EMI interference Identify possible radiating frequency

sources (i.e.; wireless LANs, switching

power supplies) and isolate them.

Replace any unshielded twisted pair

cable with shielded twisted pair cable.

Technical Specifications

Video Bandwidth 300 MHz

Max Resolution 1600 x 1200

Max Distance 350 feet

Audio Frequency Response 20 Hz to 20 kHz

Enclosure Metal

Control IR or RS232; IR takes precedence when

both are connected

Max Distance of AV Cables 6 feet

Skew Adjustment Front panel color (R,G,B) trim-pots

Status Front panel power LED

Power 5 VDC @ 0.5A

Dimensions 5.25” x 3.38” x 1.00”

Temperature Operating: 0° to 55°C

Storage: -20° to 85°C

Humidity: up to 95%

Shipping Weight 3.0 lbs.

Warranty 2 years

Compliancy CE, RoHS

Included Accessories One (1) 5VDC power supply

Ordering Information DIGI-VGASD-R

*Distances, picture and audio quality may be affected by cable grade,

cable quality, source and destination equipment, RF and electrical

interference, and cable patches. Intelix specifications are based on

straight-through cabling with standard-grade Cat 5.

Intelix LLC

2222 Pleasant View Road Phone: 608-831-0880

Middleton, WI 53562 Toll-Free: 866-4-MATMIX

www.intelix.com [email protected]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intelix Sender Handbücher

Intelix

Intelix AVO-A4-WP110-EU Bedienungsanleitung

Intelix

Intelix NT-HD70-TXWP Bedienungsanleitung

Intelix

Intelix AvoCat AVO-A4 Series Bedienungsanleitung

Intelix

Intelix V1A2 Bedienungsanleitung

Intelix

Intelix AVO-V3PT-F Bedienungsanleitung

Intelix

Intelix VGA-SR Passive Bedienungsanleitung

Intelix

Intelix AVO-VGA2-WP Bedienungsanleitung

Intelix

Intelix AvoCat AVO-A2-WP Bedienungsanleitung

Intelix

Intelix AvoCat AVO-SVA2-WP-F Series Bedienungsanleitung

Intelix

Intelix DIGI-HD-IR3-WP Bedienungsanleitung

Intelix

Intelix S-V1AR Bedienungsanleitung

Intelix

Intelix AVO-V2A2 Bedienungsanleitung

Intelix

Intelix AvoCat AVO-V2A2-WP-F Bedienungsanleitung

Intelix

Intelix INT-HDX100-RXWP Bedienungsanleitung

Intelix

Intelix DIGI-VGASD2-T8 Bedienungsanleitung

Intelix

Intelix Power Supply IX-DIGI1 Bedienungsanleitung

Intelix

Intelix AVO-V2A2-F Bedienungsanleitung

Intelix

Intelix AVOCat AVO-A2-WP-F Bedienungsanleitung

Intelix

Intelix DIGI-V3SD-S Bedienungsanleitung

Intelix

Intelix DIGI?HD?UHR2 Bedienungsanleitung

Intelix

Intelix AVO-A4-WP Bedienungsanleitung

Intelix

Intelix A2 Bedienungsanleitung

Intelix

Intelix DIGI‐HD‐IR2 Bedienungsanleitung

Intelix

Intelix AVO-V2A2-WP Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung