Intellinet 550703 Bedienungsanleitung
Wireless Network
IP Camera
PROFESSIONAL SERIES
Model 550703
User’s Guide LV2.0
WIRELESS NETWORK IP CAMERA User’s Guide
1
Wireless Network
IP Camera User’s Guide
Copyright January 2005
FCC Compliance Statement
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user
that changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction, may cause harmful
interference to radio communication. However, there is no guarantee that interference will not occur in a
particular installation if this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WIRELESS NETWORK IP CAMERA User’s Guide
2
Important Notice
1. Camera surveillance laws may differ for each country. Please contact the local authorities to avoid any
surveillance law violations.
2. Please note that the CMOS lens that comes with the Wireless Network IP Camera can be damaged
permanently if the camera lens is exposed to direct sunlight. If your application demands prolonged
exposure to sunlight, you should consider equipping it with a sun visor.
3. The Wireless Network IP Camera is not weatherproof. Please be aware of environmental specifications
included in the manual. For outdoor use, please use a weatherproof case to protect the Wireless Network
IP Camera from water, moisture, or temperature (higher or lower than specification). For Wireless
Network IP Camera cleaning, gently wipe with clean dry cloth.
4. Be sure to use only the DC adapter that is provided with your camera. Connecting the Wireless Network
IP Camera directly to AC current may cause electric damages to the Camera.
5. Be cautious when handling Wireless Network IP Camera. Physical shocks may cause serious damage.
6. Be sure to mount the Wireless Network IP Camera securely to avoid any human injures. Please keep the
Wireless Network IP Camera out of reach of children.
7. If the Wireless Network IP Camera does not operate properly, please contact the closest local Wireless
Network IP Camera distributor for after sales service. In all cases, you are prohibited from
disassembling the product. If you do, INTELLINETACTIVE NETWORKING is not responsible for
any malfunction or the service warranty.
WIRELESS NETWORK IP CAMERA User’s Guide
3
TABLE OF CONTENTS
PRODUCT OVERVIEW 5
ABOUT WIRELESS IP NETWORK CAMERA 5
MAIN FEATURES AND BENEFITS 6
SYSTEM REQUIREMENTS 8
PHYSICALDESCRIPTION 9
CONTENTS 9
TOP VIEW AND DESCRIPTION 10
REAR VIEW AND DESCRIPTION 11
INSTALLATION SUMMARY 12
ASSIGNINGIPADDRESS &ACCESSINGNETWORK IP
CAMERA HOME PAGE 13
ASSIGNING IPADDRESS 13
ASSIGNING IPADDRESS BY USING IP INSTALLER 14
CONNECTING WIRELESS NETWORK IPCAMERA TO A PC 14
USING IPINSTALLER 15
ASSIGNING IPADDRESS BY USING HYPER TERMINAL 17
CONFIGURING HYPER TERMINAL 17
ASSIGNING AN IPADDRESS 19
ACCESSING THE WIRELESS NETWORK IP CAMERA HOME PAGE 22
STARTING THE WEB BROWSER 22
LOGIN PAGE 22
NETWORK IPCAMERA HOME PAGE 26
ADJUSTINGTHE CAMERALENS 29
ADJUSTING THE FOCUS 29
REPLACING THE LENS 30
WIRELESS NETWORK IP CAMERA User’s Guide
4
CONFIGURINGADMINISTRATION TOOLS 31
ADMINISTRATOR MENU OVERVIEW 32
IMAGE CONFIGURATION 33
NETWORK CONFIGURATION 35
WIRELESS CONFIGURATION 39
USER CONFIGURATION 42
EVENT TRIGGER CONFIGURATION 43
TIME CONFIGURATION 47
SYSTEM CONFIGURATION 48
APPENDIX 50
A. TECHNICAL SPECIFICATIONS 50
B. FAQ 54
C. TROUBLE SHOOTING 56
D.UTILIZING IPADDRESSES ON LOCAL NETWORK 57
INTRODUCTION 57
IPCONSTRUCTION AND NETWORK CLASS 57
CCLASS NETWORK 58
E. UPDATING FIRMWARE 61
IDENTIFY THE VERSION OF FIRMWARE 61
DOWNLOAD NEW FIRMWARE 61
INSTALL NEW FIRMWARE 62
F. THE I/O CONNECTOR 63
G. RS 232 CABLE 64
H. DYNAMIC DOMAIN NAME SERVER 65
I.HIGH-SPEED SOLUTIONS 72
J.REINSTATING THE FACTORY DEFAULT SETTINGS 74
K. GLOSSARY OF TERMS 75
WIRELESS NETWORK IP CAMERA User’s Guide
5
PRODUCT OVERVIEW
About the Wireless Network IP Camera
The Wireless Network IP Camera can be connected directly to Ethernet or Fast Ethernet networks
and also supports wireless transmission based on the IEEE 802.11b standard. It is different from the
conventional PC Web Camera; the Wireless Network IP Camera is as standalone system with built-
in CPU and web-based solutions providing a low cost product that can transmit high quality video
images for monitoring. The wireless Network IP Camera can be managed remotely, accessed and
controlled by any PC/Notebook over an intranet or the Internet via a web browser. The simple
installation procedures and web-based interface allows easy integration into your network
application environments coupled with many applications such as remote monitoring for a cost-
effective solution.
WIRELESS NETWORK IP CAMERA User’s Guide
6
Main Features and Benefits
Convenient Operation
The Wireless Network IP Camera is a standalone system with built-in CPU requiring no special
hardware or software such as PC frame grabber cards. The Wireless Network IP Camera supports
both Active-X mode for Internet Explorer and JAVA mode for Internet Explorer and Netscape
Navigator. Therefore, all that is required is a common web browser, such as Microsoft Internet
Explorer 4.x or above.
Open Standards
The Wireless Network IP Camera supports TCP/IP networking, SMTP e-mail, HTTP and other
Internet-related protocols. It can be used in a mixed operating system environment with Windows,
Unix, Mac and OS/2. It integrates easily into other web/intranet applications and CGI scripts.
Wired and Wireless Network Support
The Wireless Network IP Camera supports both wired and wireless transmission providing the
advantage of mobility, flexibility and high-speed wireless LAN based technology (IEEE 802.11b) to
transform it into a total solution for your network. Three modes can be configured from the slide on
the rear panel:
●Local Area Network (Ethernet / Fast Ethernet) only
●Local Area Network (Ethernet / Fast Ethernet) and Wireless Local Area Network (802.11b)
●Wireless Local Area Network (802.11b) only
Simple Administration
Using a standard web browser, you can configure and manage the Wireless Network IP Camera
directly from its own embedded web pages. The embedded operating system is upgradeable through
the network.
Firmware Upgrades are available on the web at: http://www.intellinet-network.com/ipcamera/
External Devices
The auxiliary input/output connector on the camera allows you to connect your Wireless Network IP
Camera to a variety of external devices; such as IR-sensors, switches, and alarm relays.
WIRELESS NETWORK IP CAMERA User’s Guide
7
Security
Your Wireless Network IP Camera includes a self-contained web server, which means that digital
images can be secured in the same manner as with any other Internet host. Your Network
Administrator, using the unit’s security settings in combination with an organization’s Internet
firewall, normally implements data protection. The Administrator can decide whether individuals,
groups, or the whole world may access the camera. The Wireless Network IP Camera supports
multi-user password protection
Compression and Performance
With an adaptive frame rate dependent on the image and lighting conditions, the Wireless Network
IP Camera delivers up to 30 JPEG images per second at a resolution of 320x240.
Broad Range ofApplications
With today’s high-speed Internet services, the Wireless Network IP Camera can provide the ideal
solution for live video images over the intranet and Internet for remote monitoring. The Wireless
Network IP Camera allows remote access from a web browser for live image viewing and allows
Administrator to manage and control the Wireless Network IP Camera anywhere and any time.
Apply the Wireless Network IP Camera to monitor various objects and places such as homes,,
offices, banks, hospitals, child-care centers, amusement parks and other industrial and public
facilities. The Wireless Network IP Camera can also be used for intruder detection, to capture still
images for archiving and many more applications.
FreeApplication Software *
IP Installer – for quick installation
Multi-Viewer – for viewing of 4 cameras simultaneously
PDAViewer – for viewing the camera on Windows CE PDA devices.
* Available at http://www.intellinet-network.com/ipcamera/.
WIRELESS NETWORK IP CAMERA User’s Guide
8
System Requirements
Network
10Base-T Ethernet or 100Base TX Fast Ethernet
Wireless LocalArea Network
IEEE 802.11b Wireless LAN
Recommended PC or Notebook to Access the Wireless Network IP Camera.
System Requirements:
CPU: Pentium II, 266 MHz or above
Memory Size: 32 MB (64MB recommended)
VGA card resolution: 800 x 600 or above
Web Browser:
Internet Explore 5.0 or above (Active-X & JAVA Mode-Image View for Windows OS and JAVA
Mode – Image View for other OS)
Netscape 6.0 or above (JAVA Mode – Image View)
Multi-View Applications:
Supports OS: Win 98, Win 98 SE, Win 2000, Win Me, Win XP
System requirements for Multi-View:
CPU: Pentium III, 450 MHz or above
Memory Size: 128 MB (256 MB Recommended)
VGA card resolution: 800x600 or above
WIRELESS NETWORK IP CAMERA User’s Guide
9
PHYSICAL DESCRIPTION
Contents
Carefully remove all items from the package. In addition to this User’s Guide, be certain
that you have:
One Wireless Network IP Camera (550703)
Two External Wireless Antennas
One Installation CD-ROM
One Quick Installation Guide
One Printed Manual
One AC Power Adapter (suitable for your country’s electric power)
One Camera Stand
*If any item is missing, or if you find any damage or mismatch, promptly contact
your dealer for assistance.
Inhaltsverzeichnis
Andere Intellinet IP-Kamera Handbücher
Intellinet
Intellinet 550710 Bedienungsanleitung
Intellinet
Intellinet 550710 Bedienungsanleitung
Intellinet
Intellinet 503365 Bedienungsanleitung
Intellinet
Intellinet 550710 Handbuch
Intellinet
Intellinet 501583 Bedienungsanleitung
Intellinet
Intellinet UNC-W10 Bedienungsanleitung
Intellinet
Intellinet 503365 Bedienungsanleitung
