Intellinet 503495 Bedienungsanleitung

GIGABIT

INDUSTRIAL

ETHERNET

SWITCH

USER

MANUAL

MODELS

503495,

503532,

503570

INT-503495/503532/503570-UM-0308-01

Model shown: 503495

INTRODUCTION

Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™

Industrial Gigabit Ethernet Switch:

• Model 503495 (6-port 10/100Base-TX + 2-port 1000Base-SX [SC]

Multi-Mode);

• Model 503532 (6-port 10/100Base-TX + 2-port 1000Base-LX [SC]

Single-Mode); or

• Model 503570 (6-port 10/100Base-TX + 2-port 10/100/1000Base-TX).

Specically designed for industrial Ethernet applications, this switch has

all the functions of an unmanaged switch in a robust, aluminum case

that offers IP30-standard protection.

To meet industrial device-redundancy requirements, the Industrial Gigabit

Ethernet Switch is equipped with a terminal block to provide dual power

inputs with reverse polarity protection. Plus, store and forward switching

architecture greatly increases the network efciency: It delivers true non-

blocking switching performance to all ports running at full wire speed

without any loss of packets.

Easy-to-follow instructions in this user manual help make installation of

the switch quick and simple, so you’ll also soon be enjoying the benets

of these additional features:

• Auto-sensing RJ-45 ports automatically detect optimal network speeds

• All RJ-45 ports with Auto MDI-X and NWay auto-negotiation support

• Alarm relay output to alert of power failure

• Full/half duplex operation

• Supports IEEE 802.3x ow control on full duplex and back pressure

on half duplex

• Supports 2048 MAC address entries

• 128 kBytes buffer memory

• LEDs for link/activity and full/half duplex

• DIN rail kit, or wall-mounting ears for 3-way installation

• Terminal block to provide dual power inputs with reverse polarity

protection

• Lifetime Warranty

HARDWARE

DIN-Rail Installation

1. Angle the switch’s mounting clamp relative to the DIN rail (above left)

so that the rail is positioned under the upper lip of the clamp and behind

the metal springs.

2. Push the switch toward the DIN rail until the spring on the mounting

clamp clicks in place on the rail (above right).

Wall-Mount Installation

1. Remove the DIN rail

mounting clamp from the

back of the switch.

2. Attach the wall-mount panel

to the back panel of the

switch using the six included

screws.

3. With the wall-mount panel

securely connected, attach

the switch to a wall or other

suitably sturdy vertical

surface.

DIN rail

Mounting

clamp

Switch

Spring

Wall-mount panel

Switch

Front-Panel Ports & Indicators

1 Gigabit ports

2 LEDs

3 Fast Ethernet ports

Bottom-Panel Connectors

The terminal block connections (L-R):

GND, V1+ and V1– (PWR 1), Relay

Output (1 A / 24 V DC), V2+ and V2–

(PWR 2).

To the right of the terminal block is

the PWR 3 jack (12–45 V DC).

Model 503495 Model 503570

Model 503532

1 1

3 3

GND V1+ V1– Relay V2+ V2–

12–48 V DC

power jack

SPECIFICATIONS

Standards(Models503495/503532)

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3u (100Base-TX Fast

Ethernet)

• IEEE 802.3x (ow control, for full

duplex mode)

• IEEE 802.3z (Fiber Optic Gigabit

Ethernet)

Standards(Model 503570)

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3ab (Gigabit Ethernet)

• IEEE 802.3u (100Base-TX Fast

Ethernet)

• IEEE 802.3x (ow control, for full

duplex mode)

General

• Media support:

- Model 503495:

• 10Base-T Cat3, 4, 5 UTP/

STP RJ-45

• 100Base-TX Cat5 UTP/STP

RJ-45

• 1000Base-SX multi-mode

50/125 µm & 62.5/125 µm

ber

- Model 503532:

• 10Base-T Cat3, 4, 5 UTP/

STP RJ-45

• 100Base-TX Cat5 UTP/STP

RJ-45

• 1000Base-LX single-mode

9/125 µm ber

- Model 503570:

• 10Base-T Cat3, 4, 5 UTP/

STP RJ-45

• 100Base-TX Cat5 UTP/STP

RJ-45

• 1000Base-T Cat5 UTP/STP

RJ-45

• Packet lter/forwarding rate:

- 1,488,000 pps (1000 Mbps)

- 148,800 pps (100 Mbps)

- 14,880 pps (10 Mbps)

• Buffer memory: 128 kBytes

• MAC address table: 2048 entries

• Backplane speed: 3.2 Gbps

• Switch architecture: store and

forward

• Certications: FCC Class A,

EN55022 Class A, CE Mark

LEDs

• LINK/ACT

• Full/half duplex

Power

• Power supply:

- Input voltage: 24 V DC (12 –

48 V DC), dual inputs

- Reverse polarity protection:

present

• Power consumption:

- Model 503495: 5.5 Watts

(maximum) at 24 V

- Model 503532: 5.7 Watts

(maximum) at 24 V

- Model 503532: 5.1 Watts

(maximum) at 24 V

Environmental

• Aluminum housing, IP30 protection

• Dimensions: 53 x 135 x 105 mm

W x H x L (2.1 x 5.3 x 4.1 in.)

• Weight:

- Models 503495/503532:

750 g (1.7 lbs.)

- Model 503570:

700 g (1.5 lbs.)

• Operating temperature: -10 –

70°C (14 – 158°F)

• Operating humidity: 5 – 95% RH,

non-condensing

• Storage temperature: -40 –

85°C (-40 – 185°F)

Regulatory Approvals

• EMI:

- FCC Class A

- EN55022 Class A

• EMC:

- EN61000-4-2

- EN61000-4-3

- EN61000-4-4

- EN6100-4-5

- EN6100-4-6

• Safety:

- UL

- cUL

- CE/EN60950

• Shock: IEC 60068-2-27

• Freefall: IEC 60068-2-32

• Vibration: IEC 60068-2-6

• MTBF:

- Model 503495:

283,492 hours

- Model 503532:

280,653 hours

- Model 503570:

287,250 hours

Calculated MTBF is based on

MIL-HDBK-217F (Military

Handbook) standard

Package Contents

• Industrial Gigabit Ethernet

Switch

• User manual

INTELLINET NETWORK SOLUTIONS™offers a complete line

of active and passive networking products.

Ask your local computer dealer for more information or visit

www.intellinet-network.com.

SOLUTIONS

All products mentioned are trademarks or registered trademarks of their respective owners.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intellinet Schalten Handbücher

Intellinet

Intellinet 561822 Bedienungsanleitung

Intellinet

Intellinet 503631 Bedienungsanleitung

Intellinet

Intellinet 561358 Bedienungsanleitung

Intellinet

Intellinet 561082 Bedienungsanleitung

Intellinet

Intellinet IPS-52GM04-10G-400W Bedienungsanleitung

Intellinet

Intellinet 552004 Bedienungsanleitung

Intellinet

Intellinet 560542 Bedienungsanleitung

Intellinet

Intellinet IPS-10GM02-242W Bedienungsanleitung

Intellinet

Intellinet 561426-V3 Bedienungsanleitung

Intellinet

Intellinet 561143 Bedienungsanleitung

Intellinet

Intellinet 561280 Bedienungsanleitung

Intellinet

Intellinet IPS-54GM06-10G-450W Bedienungsanleitung

Intellinet

Intellinet 506441 Bedienungsanleitung

Intellinet

Intellinet IES-05FP Bedienungsanleitung

Intellinet

Intellinet IPS-5G01-140W Bedienungsanleitung

Intellinet

Intellinet 503358 Bedienungsanleitung

Intellinet

Intellinet 561167 Bedienungsanleitung

Intellinet

Intellinet IIS-8G02M Bedienungsanleitung

Intellinet

Intellinet 561792 Bedienungsanleitung

Intellinet

Intellinet 561754 Bedienungsanleitung

Intellinet

Intellinet 503501 Bedienungsanleitung

Intellinet

Intellinet IPS-6GM02-60W Bedienungsanleitung

Intellinet

Intellinet KVM 157025 Bedienungsanleitung

Intellinet

Intellinet 561167 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung