Inter-m IMN-511 Bedienungsanleitung
IMN-511/512
High Resolution IP Camera
Operation
Manual
* Before starting use of this product, be sure to check the broadcasting
mechanism and the power voltage.
IMN-511/512 O/P Manual
Although it is neither complicated to install nor difficult to operate your
set, a few minutes of your time is required to read this manual for a
properly wired installation and becoming familiar with its many
features and how to use them. Please take a great care in unpacking
your set and do not discard the carton and other packing materials.
They may be needed when moving your set and are required if it
ever becomes necessary to return your set for service.
Never place the unit near radiators, in front of heating vents, in
excessively humid or dusty location to avoid early damage and for
your years of quality use. Connect your complementary components
as illustrated in the following page.
Auto Iris Plug S/W & Manual CD
1
IMN-511/512(HIGH RESOLUTION IP CAMERA)
Overview ............................................................................2
Features..............................................................................3
Precautions........................................................................5
Part Names and Function.................................................8
Rear Names and Function..............................................10
Installing IMN-511/512.....................................................13
1. Lens Mounting and Connection .................................13
2. Lens Adjustment.........................................................18
3. Connecting a Monitor .................................................22
4. Connection method for MIC and Speaker..................24
5. Connecting a network.................................................24
6. Connecting Sensor In/Out ..........................................25
7. Connecting PAN/TILT ................................................26
Setting IP Address ..........................................................27
Camera Setup ..................................................................32
Specifications..................................................................35
Trouble Shooting ............................................................37
2IMN-511/512(HIGH RESOLUTION IP CAMERA)
IMN-511/512(series) is 540 High Resolution DAY & NIGHT
Network Camera adopting SONY CCD with 410,000 pixels of
high picture quality, which is a color camera realizing 0.01Lux
with lowest light intensity.
It supports high quality MPEG-4, connected with Ethernet or
xDSL/Cable modem at the speed of 30 frames/sec.
The transmitted image can be monitored from any place with a
computer having Microsoft Internet Explorer installed.
It offers users access to high quality video and audio from any
workstation on the LAN/WAN. The Network Camera is ideal for
surveillance applications that require high quality, full motion
video and audio, as well as comparatively low bandwidth
demands on the network. Also, this system provides remote
users in the Internet with alarm processing function and remote
control on PAN/TILT/ZOOM/FOCUS.
The built-in Web server provides its own application page for
direct viewing of the network camera, as well as full web-based
control of the management and configuration functions. All of
this can be accessed from a browser over the network.
3
IMN-511/512(HIGH RESOLUTION IP CAMERA)
■■
■■
Video
- Adopts 1/3” 410,000 pixel high fidelity SONY CCD
- 540TV LINES Horizontal resolution(Color), 570TV
LINES(B/W)
- Minimum 0.01Lux by transmission of IR-CUT Filter(F1.2)
- Day & Night(IR CUT FILTER) Function
- High-speed automatic shutter(ELC) function
- Back Light Compensation(BLC
- Flickerless function
- Auto gain Control(AGC) function
- Supports mounting of DC/VIDEO iris lens
- Possible to install C/CS Mount lens
■■
■■
Video Compression
- High Resolution live video up to 30fps
- Compression: MPEG4, MJPEG selectable
- Resolution: D1, VGA, QVGA, 4CIF, CIF, QCIF
- Bandwidth Utilization Control by user
- BitRate : 0.256 ~ 4Mbps per Client
■■
■■
Video out
- One Composite Loop-out (75ΩAuto-termination)
■■
■■
Video Motion Detection
- Streamer Based motion detection
- 20*15 cell
- 0 ~ 100 Sensitivity Resolution
■■
■■
Networking
- ARP, ICMP, TCP/IP, UDP/IP, RTP/RTSP, HTTP server,
FTP Server, SMTP client, TIME client, FTP client, DHCP
client
- 10/100 Base-T Fast Ethernet (Auto Negotiation)
4IMN-511/512(HIGH RESOLUTION IP CAMERA)
■■
■■
Security
- IP Address Filtering
- Multi-level password protection
■■
■■
Audio Compression
- Linear PCM 8KHz, 16bit Mono
- Bi-directional Audio
■■
■■
Audio In/out
- External Microphone
- Speaker output
■■
■■
Connections & Connectors
- 485 Transceiver
- 1 Sensor Input (normal open/normal close selectable)
- 1 Relay Output
■■
■■
Power
- Power Source - 12VDC Adapter
- Power consumption 7.2Watt@12VDC for IMN-511
8.4Watt@12VDC for IMN-512
5
IMN-511/512(HIGH RESOLUTION IP CAMERA)
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions
in the literature accompanying the appliance.
Caution: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not any
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette fiche
polarisée avec un prolongateur, une prise de courant on une
autre sortie de courant, sauf si les lames peuvent étre
insérées à fond sans en laisser aucune partie à découvert.
6IMN-511/512(HIGH RESOLUTION IP CAMERA)
Warning
DO NOT ATTEMPT TO INSTALL THE
PRODUCT YOURSELF.
WHEN SMOKE OR ABNORMAL HEAT
EMISSION IS DETECTED, STOP USING THE
CAMERA.
It can result in fire. In this case, stop
using the camera and refer servicing
to a local agency or the Customer
Service Department in the
headquarters.
This product must be installed by qualified
personnel. Trying to install the product yourself
can cause a risk of fire or electric shock.
Thus, the user should
consult with a nearby
agency for
proper permitting.
DO NOT INSTALL THE PRODUCT IN DUSTY
OR DAMP PLACES WITH POOR
VENTILATION OR PLACES WITH OIL OR
GAS.
DO NOT PLACE THE PRODUCT IN
UNSTABLE PLACES WITH VIBRATION OR
ON A SLANTED SURFACE OR IN PLACES
WITHOUT SECURE MOUNTINGS.
The product must be
securely fastened to
avoid mounting failure
that can inflict damage
to the product and even
jeopardize a person’s
life.
It will cause the abnormal
operation of the product or
result in a risk of electric
shock or fire.
DO NOT GRASP OR PULL THE POWER
CORD OR PLUG WITH WET HANDS.
DO NOT DISSEMBLE THE PRODUCT OR
INSERT UNDESIRED FOREIGN
SUBSTANCES.
When the cord or plug is
damaged or frayed, it can
cause fire or electric shock.
It will result in the abnormal
operation of the product and fire.
This sign is provided to alert the user to the presence of possible
hazards that could cause serious injury or even death.
Warning
This sign is intended to alert the user to the presence of possible
hazards that could cause personal injury or property damage.
Caution
7
IMN-511/512(HIGH RESOLUTION IP CAMERA)
DO NOT INSTALL THE CAMERA IN EXTREME
TEMPERATURE CONDITION
DO NOT INSTALL THE CAMERA UNDER
UNSTABLE LIGHTING CONDITION
Unstable lighting can
cause the camera to work
improperly. If the
camera is exposed to
spotlight or object
reflecting strong light,
smear or blooming
may occur.
Do not use the camera under
condition where temperature
is over -10°C to 50°C.
Especially be careful for
ventilation
under high
temperature.
DO NOT DROP OR SHAKE THE CAMERA DO NOT INSTALL THE CAMERA FACE UNDER
STRONG LIGHTING CONDITION
It can cause
malfunction of CCD.
It can cause malfunction.
DO NOT TOUCH THE LENS DO NOT INSTALL THE CAMERA UNDER WET
OR RAIN
It can cause the image
quality to be poor.
If it gets wet, it can cause the
camera out of order.
DO NOT INSTALL THE CAMERA CLOSELY AT
THE MAGNETIC
DO USE A DRY CLOTH TO CLEAN THE
CAMERA
It can cause malfunction. To sweep the camera, use a dry
and soft cloth.
* Please check that the power satisfies the normal specification before
connecting the camera.
This sign indicates practices considered ‘unacceptable’ during use of the product.
This sign illustrates mandated practices during use of the product.
Caution
8IMN-511/512(HIGH RESOLUTION IP CAMERA)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
