Intergraph Zx1 ViZual Workstation Bedienungsanleitung

D1AA0032B, 08/00

ZX1

Late-Breaking News

Windows 2000

Localized Versions

On a system with Windows 2000 Korean, Japanese, or Simplified Chinese, the Windows 2000

interface will display in English after completing Setup. Windows 2000 will display in the proper

language after you restart the system for the first time.

BIOS Changes

To run Windows 2000 on your system, you may need to make some changes in BIOS Setup.

To enable USB function:

♦Under Advance Chipset Setup, change USB Function to Enabled.

To enable ACPI before installing Windows 2000 for the Hibernate and Standby features:

♦Under Advance Chipset Setup, change ACPI Control Register to Enabled.

♦Under Power Management Setup, change ACPI Aware O/S to Yes.

♦Under Plug and Play Setup, change Plug and Play Aware O/S to Yes.

See the System Board Manual for more information on running BIOS Setup.

Power Management

Using current versions of Hardware Monitor and ECC Memory Monitor software prevents the use

of Hibernate or Standby modes. Updated versions that allow the use of these modes will be posted

to the Support pages on the World Wide Web (http://www.intergraph.com/ics) when available.

You cannot use Hibernate or Standby modes on a system with the following video controllers:

♦Intense3D Wildcat 4105, 4000, 3510, 3410, 3400

♦RealiZm II VX113, VX113A

Device Manager

If your system has a SAF-TE card installed on the RAID disk drive cage, Device Manager displays

the card under ? Other Devices. Despite this designation, the card is working properly.

Device Manager may display an error (!) for the VGA Controller on the following video

controllers. You may ignore this designation, as it does not affect their operation:

♦Intense3D Wildcat 4105, 4000, 3510, 3410, 3400

♦RealiZm II VX113, VX113A

Reinstalling Wildcat Graphics Drivers

If you reinstall Windows 2000 on a system with Intense3D Wildcat graphics, you must install the

driver software for the Wildcat graphics controller after completing Windows 2000 Setup.

To install Wildcat graphics driver software in Windows 2000:

1. Log on to Windows 2000 using an account that has administrative privileges.

2. Right click My Computer and go to Manage » Device Manager » Other Devices » Video

Controller » Driver » Update Driver.

3. When the Upgrade Device Driver Wizard displays, click Next.

4. Select Search for a suitable driver for my device (recommended), and then click Next.

5. Make sure the appropriate search location is selected, and that Disk 1 of the driver media is

loaded in the appropriate drive; then click OK.

6. Under Driver Files Search Results, click Next to start the installation.

7. Insert Disk 2 when prompted, and then click OK to continue with the installation.

8. Once the driver successfully installs, click Close.

CAUTION Windows 2000 recognizes the dual pipelines in a Wildcat 4110 or 4210 graphics

controller as two devices. Repeat Steps 2 through 7 to complete the installation for

the VGA-compatible video controller driver.

9. Restart the computer.

BIOS Requirement

BIOS version 1.30B or later is required for Windows 2000.

Windows NT

Setup and the Network Controller Driver

CAUTION When going through Windows NT Setup (for the first time or to reinstall Windows

NT), do not let Setup auto-detect and configure the system’s network controller. If

you do, the system may fail to operate correctly.

When going through Setup for the first time on a system running Windows NT Server, do the

following when asked if you want Setup to search for the network adapter:

1. Click Select from List and then click Have Disk.

2. In the text box, replace A: with \winnt\pro100plus, and then click OK. On a system with

Japanese Windows NT Server, replace A: with C: and then click OK.

3. When prompted to select the OEM option, click Intel PRO Adapter and then click OK.

When going through Setup at all other times, complete Setup without auto-detecting the system’s

network controller. When Setup completes, install the network controller driver software manually

from diskette.

The network controller driver software is in the PRO100PLUS folder on the system’s driver CD.

First see the README.TXT file for information on creating a driver diskette using the MAKEMS.BAT

program. Then see the MS.TXT file for information on installing the driver software using Network

in the Windows NT Control Panel.

After installing the network controller driver software, see the System Guide for information on

configuring networking. When installing network protocols (such as TCP/IP), you can install them

from C:\WINNT\I386 on your system.

Setup and the SCSI Controller Driver

If you reinstall Windows NT, you must install the SCSI controller driver software from diskette.

You cannot install it from the system’s driver CD.

System Hardware

Boot Hang

Your system may hang intermittently while booting, following the display of the “Z” logo with a

blinking cursor, or after scanning devices connected to the SCSI controller. If this happens, restart

the system and run BIOS Setup. Go to Advanced CMOS Setup and set Quick Boot to disable,

then save the change and exit from BIOS Setup. This procedure marks unused IDE ports as “not

installed,” so you must repeat it if you add any IDE devices later.

Mylex RAID Controller

If your system has a Mylex RAID controller, you can press ALT+Rduring system boot to run RAID

configuration utilities. To ensure your system can do this, restart the system and run BIOS Setup.

In Advanced CMOS Setup, set 2nd Boot Device to SCSI, then save the change and exit from

BIOS Setup. For more information on Mylex RAID configuration, see the Mylex documentation

delivered with the RAID controller.

BIOS and System Board Information

See the System Guide or System Setup document for instructions on running BIOS Setup and for

detailed information on BIOS configuration. The BIOS information in the System Board Manual

does not apply to your system’s customized BIOS.

See the System Board Manual for detailed information on system board specifications, features,

components, and connections.

trade secret, and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means,

or be used to make any derivative work, without written consent from Intergraph Computer Systems.

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subdivision

(c)(1)(ii) of the rights in technical data and computer software clause at DFARS 252.227-7013. Unpublished rights are

reserved under the copyright laws of the United States.

Intergraph Computer Systems, Huntsville AL 35894-0001

Notice

Information in this document is subject to change without notice and should not be considered a commitment by

Intergraph Computer Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or

omissions from, this document. Intergraph Computer Systems shall not be liable for incidental or consequential damages

resulting from the furnishing or use of this document.

All warranties given by Intergraph Computer Systems about equipment or software are set forth in your purchase contract.

Nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or

amendment of such warrantites.

Trademarks

Intergraphand the Intergraph logo are registered trademarks of Intergraph Corporation. Zxand Ultra-Towerare

trademarks of Intergraph Computer Systems. Inteland Pentiumregistered trademarks of Intel Corporation.

Microsoft, Windows, and Windows NTare registered trademarks of Microsoft Corporation. Other brands and

product names are trademarks of their respective owners.

Andere Handbücher für Zx1 ViZual Workstation

Inhaltsverzeichnis

Andere Intergraph Desktop Handbücher

Intergraph

Intergraph Zx10 Ultra-Tower Bedienungsanleitung

Intergraph

Intergraph TD-325 Targa 2000 Bedienungsanleitung

Intergraph

Intergraph TDZ 2000 GL2 Workstation Bedienungsanleitung

Intergraph

Intergraph TD-300 Betriebsanleitung

Intergraph

Intergraph TDZ 2000 GX1 Bedienungsanleitung

Intergraph

Intergraph TDZ-400 Deskside Betriebsanleitung

Intergraph

Intergraph TDZ 2000 Bedienungsanleitung

Intergraph

Intergraph TDZ 2000 GT1 Bedienungsanleitung

Intergraph

Intergraph TDZ 2000 GL2 Workstation Benutzerhandbuch

Intergraph

Intergraph TDZ 2000 GT1 Bedienungsanleitung

Intergraph

Intergraph TDZ 2000 GL2 Workstation Bedienungsanleitung

Intergraph

Intergraph TDZ 2000 GL2 Workstation Bedienungsanleitung

Intergraph

Intergraph TDZ-300 Betriebsanleitung

Intergraph

Intergraph Zx10 6U Stücklistenhandbuch

Intergraph

Intergraph Zx1 ViZual Workstation Benutzerhandbuch

Intergraph

Intergraph Zx1 ViZual Workstation Stücklistenhandbuch

Intergraph

Intergraph TD-260 Stücklistenhandbuch

Intergraph

Intergraph TD-2x Bedienungsanleitung

Intergraph

Intergraph TDZ 2000 GL1 Bedienungsanleitung

Intergraph

Intergraph TD-x10 Setup Benutzerhandbuch

Intergraph

Intergraph TD-20 Setup Benutzerhandbuch

Intergraph

Intergraph TDZ 2000 GL1 Bedienungsanleitung

Intergraph

Intergraph TD-x20 Setup Bedienungsanleitung

Intergraph

Intergraph ExtremeZ SAN Leitfaden

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung