Intermec 4400 Bedienungsanleitung

User’s

Manual

4400 Bar Code Label Printer

058607-006

IntermecCorporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. technical and service support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian technical and service support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

1996 by Intermec Corporation

The word Intermec, the Intermec logo, JANUS, IRL, Duratherm, TRAKKER, Antares, Precision

Print, PrintSet, Virtual Wedge, and CrossBar are trademarks of Intermec Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark ()

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

SILICON SOFTWARE

laws of the United States.

RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data & Computer Software clause at (D) FAR

252.227-7013.

READY SYSTEMS, 470 POTRERO AVE., SUNNYVALE, CA 94086

Manual Change Record

This page records the changes to this manual. The manual was originally released as version 001.

Version Date Description of Change

002 3/93 The manual was updated to reflect changes made to the firmware.

Information affected by the update includes the printhead resistance

test and 4406 specific references.

003 9/93 Addendum 060093-001 was added to the manual. The addendum

contains firmware version 2.2 information.

004 02/95 Addendum 061534-001 was added to the manual. The addendum

contains firmware version 2.3 information including new information

on 2D symbology and updates existing information on HIBC and UCC

128. It also contains new information on Maxicode.

005 07/96 The manual was updated to include PrintSet information. Revisions

were added to include information on setting sensitivity ratings and

downloading user-defined fonts.

006 11/96 The manual was converted to an 8.5 x 11 page size. Other minor

revisions were made.

Contents

Before You Begin xvii

Warranty Information xvii

Safety Summary xvii

Warnings, Cautions, and Notes xviii

About This Manual xviii

Other Intermec Manuals xx

Getting Started

Unpacking the Printer 1-3

Checking the Order for Completeness 1-3

Reporting Damage or Defects 1-5

Learning About the 4400 Printer 1-5

Printing a Configuration Test Label 1-10

Powering Up Your Printer 1-10

Opening the Printer 1-11

Loading Media 1-12

Closing the Printer 1-14

Printing the Label 1-14

Restoring Printer Default Configuration 1-15

Installing the Printer

About Printer Installation 2-3

Preparing for Installation 2-4

Situating the Printer 2-4

Installing the Media Roll Holder 2-4

Connecting the Printer to Your System 2-5

Connecting the 4400 to a PC 2-6

Connecting the Printer to a PC Serial Port 2-6

Connecting the Printer to a PC Parallel Port 2-8

Connecting the 4400 to a Network 2-9

Connecting the 4400 to an AS/400 2-9

4400 Bar Code Label Printer User’s Manual

Connecting the 4400 to a Mainframe 2-9

RS-485 (Multi-Drop) Cables 2-11

Cabling Considerations in Noisy Electrical Environments 2-11

Configuring the Serial Port 2-12

Verifying Printer Communications With Your System 2-14

Using the Control Panel

About the Control Panel 3-3

Reading the Display 3-4

Understanding the Indicator Lights 3-4

Alert 3-4

Power 3-4

Online 3-5

Using the Operator Keys 3-5

[ONLINE/OFFLINE] 3-5

[OPEN] 3-6

[FEED/RELOAD] 3-6

Using the Selection Keys to Access the Menus 3-6

About the Printer Menus 3-7

Accessing the Main Menu 3-7

Moving Around Within the Circle 3-8

Tips for Using the Control Panel 3-10

Operating the Printer

About Printer Operation 4-3

Opening and Closing the Printer 4-3

Opening the Printer With Power On 4-3

Opening the Printer With Power Off 4-4

Closing the Printer 4-5

Opening and Closing the Printer With the Media Alert Enabled 4-6

Loading Media Into the Printer 4-7

Opening the Edge Guides 4-7

Removing the Media Roll and Shaft 4-8

Contents

vii

Installing a New Media Roll 4-8

Feeding Media Into the Printer 4-9

Adjusting the Edge Guides 4-11

Changing Thermal Transfer Ribbon 4-12

Removing the Ribbon Access Door 4-12

Loading the Thermal Transfer Ribbon 4-13

Replacing the Ribbon Access Door 4-15

Setting the Media Sensitivity Number 4-16

Setting the Media Sensitivity Number for Thermal Transfer Media 4-17

Setting the Media Sensitivity Number for Other Media and Ribbons 4-17

Setting the Dark Adjust 4-20

Using the X and Y Forms Adjust 4-21

Adjusting the Label Rest Point 4-23

Printing the Buffer Contents 4-24

About Error Messages 4-24

Configuring the Printer

About Printer Configuration 5-3

Changing the Basic Configuration Settings 5-3

Changing the Label Configuration Settings 5-6

About the Printhead Test 5-8

Printhead Pressure 5-8

Adjusting the Printhead Test 5-9

The Printhead Range Percentage 5-9

Adjusting the Printhead Range 5-10

Optimizing the Print Speed and Image Bands 5-11

About the Image Bands Command 5-11

Optimizing Image Bands for Print Speed 5-11

Optimizing Image Bands for Batch Printing 5-12

Configuring the Label Width 5-12

Setting the Media Alert 5-14

4400 Bar Code Label Printer User’s Manual

viii

About Configuration Test Labels 5-16

User-Defined 5-16

Hardware 5-16

Printing a Configuration Test Label 5-17

Restoring Printer Default Configuration 5-19

Memory Reset 5-19

Factory Default Settings 5-20

Replacing an 8636/46 Printer With a 4400 Printer 5-21

About the Emulation Settings 5-21

Printing in Emulation Mode 5-22

Designing Labels and Using Commands

Introduction to Label Design 6-3

Label Formats 6-3

Communicating With the Printer 6-4

Using the PrintSet Software 6-5

Using the Printer Command Set 6-5

Downloading Commands Using DOS 6-5

Downloading Commands Using Readable Protocol/Command Characters 6-6

Downloading Commands Using PC Communications Programs or Host

Terminals 6-7

Using ASCII Control Characters 6-8

Switching Between Print Mode and Program Mode 6-8

Understanding Label Design Components 6-9

Bar Code Fields 6-10

Character Fields and Fonts 6-10

User-Defined Fonts 6-12

Downloading User-Defined Fonts 6-13

Downloading Bitmap Fonts 6-13

Lines and Boxes 6-13

Graphics 6-14

One Bit Per Byte 6-14

Six Bits Per Byte 6-16

Working With Fields 6-18

Editing Fields 6-18

Deleting Fields 6-19

Contents

Scaling Fields 6-19

Magnifying Fonts and Character Fields 6-19

Magnifying Bar Code Fields 6-20

Positioning Fields 6-20

Rotating Fields 6-21

Storing Label Formats 6-22

Designing Pages 6-22

Using Printer Memory 6-23

Format Examples 6-23

Example 1 6-24

Example 2 6-27

Printer Commands

Command Set Summary 7-3

Summary of Print Mode Commands 7-4

Summary of Configuration Commands 7-6

Summary of Program Mode Commands 7-8

Summary of Test and Service Mode Commands 7-11

Using Printer Commands According to Function 7-12

Programming 7-12

Editing Pages 7-12

Editing Formats 7-12

Editing Bar Code Fields 7-13

Editing Human-Readable Fields 7-13

Editing Interpretive Fields 7-13

Editing Line Fields 7-14

Editing UDC Fields 7-14

Editing Box Fields 7-14

Editing UDCs 7-14

Editing Bitmap UDFs 7-15

Editing Outline UDFs 7-15

System 7-15

Printing 7-16

Configuring 7-17

Transmitting 7-18

Protocol Modification 7-18

Test and Service 7-19

Cutter 7-19

Self-Strip 7-19

Automatic Printhead Resistance Test 7-19

4400 Bar Code Label Printer User’s Manual

Print Mode Commands 7-20

4400 Mode, Select 7-20

86XX Emulation Mode, Enter 7-21

Abort Print Job 7-21

Alphanumeric Field Separator 7-21

Batch Count, Set 7-22

Clear All Data 7-22

Clear Data From Current Field 7-22

Command Terminator 1 7-22

Command Terminator 2 7-22

Configuration Parameters, Transmit 7-23

Cut 7-23

Data Shift - International Characters 7-23

Error Code, Transmit 7-23

Field Decrement, Set 7-24

Field Increment, Set 7-24

Field, Select 7-24

First Data Entry Field, Select 7-25

Font, Transmit 7-25

Form Feed 7-25

Format, Select 7-26

Format, Transmit 7-26

Increment and Decrement, Disable 7-26

Label and Gap Length, Transmit 7-27

Next Data Entry Field, Select 7-27

Numeric Field Separator 7-27

Options Selected, Transmit 7-27

Page, Select 7-28

Page, Transmit 7-28

Print 7-28

Printhead Parameters, Transmit 7-28

Program Mode, Enter 7-29

Program Number, Transmit 7-29

Quantity and Batch Count, Transmit 7-29

Quantity Count, Set 7-29

Reset 7-29

Start and Stop Codes (Code 39), Print 7-30

Static RAM Usage, Transmit 7-30

Status Dump 7-30

Status Enquiry 7-31

Test and Service Mode, Enter 7-31

User-Defined Characters, Transmit 7-31

User-Defined Tables, Transmit 7-32

Warm Boot 7-32

Andere Handbücher für 4400

Inhaltsverzeichnis

Andere Intermec Etikettendrucker Handbücher

Intermec

Intermec PM43c Bedienungsanleitung

Intermec

Intermec EasyCoder PD4 Bedienungsanleitung

Intermec

Intermec EasyCoder PD4 Bedienungsanleitung

Intermec

Intermec EasyCoder E4 Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec PB22 Bedienungsanleitung

Intermec

Intermec PB50 Bedienungsanleitung

Intermec

Intermec EasyCoder E4 Bedienungsanleitung

Intermec

Intermec PC23 Bedienungsanleitung

Intermec

Intermec EasyCoder PC41 Bedienungsanleitung

Intermec

Intermec PB22 Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec EasyCoder PX4i Bedienungsanleitung

Intermec

Intermec EasyCoder 501XP Original Betriebsanleitung

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Intermec

Intermec 3400 Bedienungsanleitung

Intermec

Intermec EasyCoder 301 Bedienungsanleitung

Intermec

Intermec EasyCoder 501XP Bedienungsanleitung

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Intermec

Intermec PC43d Bedienungsanleitung

Intermec

Intermec PB22 Bedienungsanleitung

Intermec

Intermec EasyCoder PF4i Bedienungsanleitung

Intermec

Intermec PB50 Bedienungsanleitung

Intermec

Intermec PF8D Bedienungsanleitung

Beliebte Etikettendrucker Handbücher anderer Marken

Brother

Brother P-Touch 2420PC Bedienungsanleitung

newell

newell Dymo LabelManager 210D Bedienungsanleitung

Brother

Brother TD-4000 Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Brother

Brother E300 Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6057 Service-Handbuch

Brother

Brother P-touch PT-9700PC Bedienungsanleitung

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung