Intersil ISL98001 Betriebsanleitung

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Installation and Operation of Intersil’s ISL98001

Analog Front End Evaluation System

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Note

To simplify installation and prevent unnecessary Windows messages during installation, do

not connect the USB cable to the ISL98001 Evaluation Board until the software installation is

complete.

PC Requirements

Operating System: Tested under Windows XP (service pack 2) and Windows 2000. Windows 98 and

ME not currently supported.

Hardware Requirements: USB Port, CD-ROM drive for install files, minimum 10MB free hard disk

space.

Software Installation

Launch the “ISL98001 Installer.exe” file on the CD ROM and follow the instructions. The default

installation will add an “Intersil” directory to the “Start Menu/Programs” tree. That directory will contain

a shortcut to the ISL98001 executable and an uninstaller. The main program files will be installed in

the Program Files/ISL98001 directory. The USB driver file windrvr6.sys will be placed into

C:\WINDOWS\system32\drivers and ISL98001.inf will be installed under C:\WINDOWS\INF.

Press “Next” to continue.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

By default, the installer will put the evaluation software under c:\Program Files\ISL98001 directory.

To us a different directory, select the “Browse” button.

Press “Next” to continue.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Press “Next” to create the Intersil folder in the Start Menu.

Press the “Install” button to copy all the necessary files onto the PC.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Connecting the Evaluation Board

After installation of the ISL98001 software, re-boot the PC if requested. Apply power to the ISL98001

Evaluation Board with the provided 5V power supply. Connect the USB cable to the ISL98001

Evaluation Board. The Microsoft windows operating system will see the ISL98001 Evaluation Board

as a new device, and will try to load appropriate driver for it.

Windows XP may pop up this message:

If you see this box, select “Yes, now and every time I connect a device” and click on “Next”. If you

elect not to select “Yes, now and every time I connect a device”, you may see this requester

whenever the device is reconnected after being disconnected.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

The following screen will then appear:

Press Next (“Install the software automatically”).

The Hardware Wizard will try to locate and install the driver for the ISL98001:

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Click Finish to complete the installation.

On XP systems, a pop-up message may display the status of the ISL98001 hardware.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Hardware Setup

By default, the ISL98001 Evaluation board is configured for an input video resolution of

1280x1024@60Hz on the VGA1 connector. The quickest way to verify operation is this:

•Connect a monitor with a DVI input to the DVI output connector

•Connect a 1280x1024@60Hz RGB video source to VGA1

•Connect the 5V power supply to the power connector

At this point, the evaluation board’s FPGA will format the data from the ISL98001 and generate SXGA

video timing on the DVI output connector. The incoming SXGA image should appear on the DVI

monitor.

Additional video modes and AFE configuration options are available using the ISL98001 evaluation

software through the USB interface.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

Starting the Software

Launch the software (default location is Start/Programs/Intersil/ISL98001).

After the program has launched, you should see the following screen:

Click on the “Read All Registers” button in the lower left screen. All of the register values from the

ISL98001 on the evaluation board should appear as shown in the next image. If the register values

are not read correctly, proceed to the Troubleshooting section of this document.

Intersil Corporation

1001 Murphy Ranch Rd

Milpitas, CA 95035

Tel: 408-432-8888

http://www.intersil.com

To change a register value, simply change the hexadecimal number in the appropriate box. To

change both digits of the 8 bit hex number, select both digits with the mouse (or double click inside

the text box) , then quickly type both digits of the desired value. If you type too

slowly (more than 1 second between the first and second digit), the first digit typed will become the

lower nibble, and the higher nibble will be 0. To only change one nibble using the keyboard, select

the high nibble or the low nibble and type the new hexadecimal

value.

You can also change the register values using the keyboard:

•Increment by 1: Up Arrow

•Decrement by 1: Down Arrow

•Increment by 16 (increment high nibble by 1): Page Up

•Decrement by 16 (decrement high nibble by 1): Page Up

Inhaltsverzeichnis

Andere Intersil Hauptplatine Handbücher

Intersil

Intersil ISL1208 Montage- und Bedienungsanleitung

Intersil

Intersil ISL59420/21EVAL1 Bedienungsanleitung

Intersil

Intersil SL71010BM50EV1Z Bedienungsanleitung

Intersil

Intersil ISL41387EVAL1Z Bedienungsanleitung

Intersil

Intersil ISL55141 Bedienungsanleitung

Intersil

Intersil ISL6228EVAL3Z Bedienungsanleitung

Intersil

Intersil ISL6442 Bedienungsanleitung

Intersil

Intersil ISL3331EVAL1Z Bedienungsanleitung

Intersil

Intersil ISL78268EVAL1Z Bedienungsanleitung

Intersil

Intersil ISL68200 Series Bedienungsanleitung

Intersil

Intersil ISL9120IIx-EVZ Bedienungsanleitung

Intersil

Intersil ISL8200MEVAL1PHZ Bedienungsanleitung

Intersil

Intersil ISL97684 Bedienungsanleitung

Intersil

Intersil ISL75052SEHEVAL1Z Bedienungsanleitung

Intersil

Intersil ISL8201M Bedienungsanleitung

Intersil

Intersil ISL32740EVAL2Z Bedienungsanleitung

Intersil

Intersil ISL6296 Montage- und Bedienungsanleitung

Intersil

Intersil ISL73847SEHEV2Z Bedienungsanleitung

Intersil

Intersil ISL54302EVAL1Z Bedienungsanleitung

Intersil

Intersil ISL281X7MSOPEVAL1Z Bedienungsanleitung

Intersil

Intersil ISL97682IRTZEVALZ Bedienungsanleitung

Intersil

Intersil ISL71026MEVAL1Z Bedienungsanleitung

Intersil

Intersil ISL800 DEMO1Z Series Bedienungsanleitung

Intersil

Intersil ISL8202MEVAL1Z Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung