InterTest CN1 Bedienungsanleitung
User Manual
$XWR)RFXV=RRP,3&DPHUDV
Firmware v1.2.0 based
Document Revision 1.3.1b
About This Guide
Disclaimer
© 2013 All rights reserved.
he trademarks of their respective owners. Information contained in this document may be superseded by updates. No
representation or warranty is given and no liability is assumed by Technology with respect to the accuracy or
use of the information, or infringement of patents or other intellectual property rights. No licenses are conveyed, implicitly
or otherwise, under any intellectual property rights.
1
INTRODUCTION 2
FEATURES 3
INTERFACE AND DIMENSION 4
4
6
Dimensions 8
SYSTEM FUNCTIONS 11
Overview 11
System Initilize 11
Zooming 11
Focus 11
Preset 12
Auto Patrol 12
Auto Scan 12
Day & Night Setting 12
White Balance 13
AE (Automatic Exposure) 13
AG (Automatic Gain) 14
WDR (Wide Dynamic Range) 14
Noise Reduction 14
Color Enhancement 15
Firmware Functionality 15
SPECIFICATIONS 16
TYPICAL INTEGRATION (PTZ DOME) 18
APPENDIX: UART COMMAND 19
Overview 19
Zoom Position Info. 19
Zoom Ratio and Zoom Position Table 19
ICR Switch On/Off Alarm Receive 20
Block Camera Version Information Inquiry 20
APPENDIX: BUILT-IN PARAMETER PAGE 21
Overview 21
Access built-in PARAMETER PAGE –General Settings 21
Access built-in PARAMETER PAGE –Movement Speed Settings 24
Access built-in PARAMETER PAGE –Preset Table Settings 26
Access built-in PARAMETER PAGE –Movement Speed Settings 27
Get Completed URL for Your Customized IPBC Firmware 29
DOCUMENT CHANGE LOG 30
Document Version 30
10x
18x / 33x
2
This guide is for the use with the Auto focus IP Block Camera using firmware version 1.1.7
or above
The User’s Manual provides functionality and instructions for the ,3FDPHUDs which include the
10[/[/33[based designed product series.
Before Using the IP Block Camera
Check the PC requirements & review the O.S. platform requirement for remote access
IP block camera products
Having basic knowledge of network setup and configuration will be helpful
Read following important precautionary information
1. &ompatible with software or any 3rd party management software
which fully integrate with API, check the software compatibility in advance if
you desire to use RWKHU software for work.
2. Do not shoot images that are extremely bright (e.g. strong light sources, the sun, etc.) for
long periods of time. Do not use or store the camera in temperature/humidity out of
storage specification. Do not close to generators of powerful electromagnetic radiation
such as radio or TV transmitters. Do not expose where it is subject to fluorescent light
reflections and where it is subject to unstable (flickering, etc.) lighting conditions. Do not
locate where it is subject to strong vibration and where it is subject to radiation from laser
beams.
3. Keep dust & dirt free on surface of lens to guarantee optimized image quality output.
4. Do not apply excessive voltage. (Use only the specified voltage.) Otherwise,
hardware may get any unrecoverable damage.
5. As CMOS image sensors use shutters that capture images line-by-line, there is a slight
time difference between the top and bottom of an image. As a result, images may appear
skewed if the camera is moved. (Commonly called Rolling Shutter)
3
FEATURES
IP Block CamerDVDUH the completed solution to provide real-time HD IP
video with PTZ feature application. It offers highly-integrated block camera solution to take full
advantage of high definition digital video, satisfying most surveillance PTZ-type camera application
with quick, ultra low-cost and easy design-in features.
'esigned with industry state-of-the-art CMOS image sensor
technology, performing high-quality image, full features and reliable AV streaming output; thanks for
up to 33X optical ratio high-end lens, no matter darkness or high dynamic range environment, RXUFDPHUDV
can always enable optimized image for surveillance purpose.
4
INTERFACE AND DIMENSION
10[
Connector and Pin-define
Name:
CN1
Type:
16-pin 1.25mm pitch female wafer
Definition:
Pin Definition
Pin_1
RS-485 +
Pin_9
GND
Pin_2
RS-485 -
Pin_10
Line_Out
Pin_3
UART_Rx
Pin_11
Line_In
Pin_4
UART_Tx
Pin_12
GND
Pin_5
External_IR_Sync._In
Pin_13
Network_Tx+
Pin_6
External_IR_Sync._Out
Pin_14
Network_Tx-
Pin_7
DC6~12V Input +
Pin_15
Network_Rx+
Pin_8
Pin_16
Network_Rx-
Name:
System reset bottom
Type:
Tact switch
Definition:
Reset system as factory default
1 16
5
Name:
SD slot
Type:
microSD/SDHC
Definition:
Compatible micro- SD or SDHC card with class4 or class10, supporting up to 32GB capacity
Locations of Controls
Front:
Bottom:
** When a tripod screw is used, please use 1/4 inch screw to attach it to the
module; also, please be sure to attach the tripod screw securely
Lens
Tripod screw hole
18x / 33x
6
[ / 3[
Connector and Pin-define
Name:
CN1
Type:
16-pin 1.25mm pitch female wafer
Definition:
Pin Definition
Pin_1
RS-485 +
Pin_9
GND
Pin_2
RS-485 -
Pin_10
Line_Out
Pin_3
UART_Rx
Pin_11
Line_In
Pin_4
UART_Tx
Pin_12
GND
Pin_5
External_IR_Sync._In
Pin_13
Network_Tx+
Pin_6
External_IR_Sync._Out
Pin_14
Network_Tx-
Pin_7
DC6~12V Input +
Pin_15
Network_Rx+
Pin_8
Pin_16
Network_Rx-
Name:
System reset bottom
Type:
Tact switch
Definition:
Reset system as factory default
Name:
Video Out
Type:
2-pin 1.25mm pitch wafer
Definition:
Composite video output (D1 resolution)
1 16
7
Name:
SD slot
Type:
microSD/SDHC
Definition:
Compatible micro- SD or SDHC card with class4 or class10, supporting up to 32GB capacity
Locations of Controls
Front:
Bottom:
** When a tripod screw is used, please use 1/4 inch screw to attach it to the
module; also, please be sure to attach the tripod screw securely
Lens
Tripod screw hole
18x / 33x
8
Pin Description
Pin_1 ~ Pin_2:
RS-485 connection interface, controlling external motor module pan/tile movement
Pin_3 ~ Pin_4:
UART connection interface, communication with external camera for smart IR and
ICR trigger; built-in VISCA protocol as default
Pin_5:
To receive high/low signal from external IR lighting module to trigger ICR switch at the
same time
Pin_6:
To trigger with high/low signal to external IR lighting module
Pin_7 ~ Pin_8:
DC + voltage input (6~12Vdc)
Pin_9:
DC voltage ground (or DC –voltage input)
Pin_10 ~ Pin_12:
Bi-directional audio connection with external speaker and microphone
Pin_13 ~ Pin_16:
Network signal
Inhaltsverzeichnis
Andere InterTest Sicherheitskamera Handbücher
