Intex Krystal Clear 603 Bedienungsanleitung

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

OOWWNNEERR’’SS AANNUUAALL

Krystal Clear™

odel 603

Filter Pump

I PORTANT

SAFETY RULES

Read, understand, and follow all

instructions carefully before

installing and using this product.

IIPPOORRTTAANNTT!!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance,

Visit www.intexcorp.com

For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839

onday through Friday, 8:30am to 5:00pm Pacific Time

Don’t forget to try these other fine Intex products: Pools, Pool Accessories,

Inflatable Pools and In-Home Toys, Airbeds and Boats available at fine

retailers or visit our website.

For illustrative purposes only.

057-***-R1-1211

SAVE THESE NSTRUCT ONS Page 2

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

TTAABBLLEE OOFF CCOONNTTEENNTTSS

Warnings......................................................................... 3

Parts List & Reference................................................... 4-5

Setup nstructions......................................................... 6-7

Maintenance................................................................... 7-8

Pool Care and Chemicals............................................. 8

Long Term Storage........................................................ 8

Troubleshooting Guide................................................. 9

Common Pool Problems............................................... 10

General Aquatic Safety................................................. 11

Limited Warranty............................................................ 12

ntex Service Center Locations.................................... 13

SAVE THESE NSTRUCT ONS Page 3

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

SSAAFFEETTYY RRUULLEESS

This product is for use with storable pools only. Do not use with

permanently-installed pools. A storable pool is constructed so that it is capable of

being readily disassembled for storage and reassembled to its original integrity. A

permanently-installed pool is constructed in or on the ground or in a building such

that it cannot be readily disassembled for storage.

CAUT ON

WARN NG

These product warnings, instructions and safety rules provided with the product represent

some common risks of water recreation devices and do not cover all instances of risk and

danger. Please use common sense and good judgement when enjoying any water activity.

I PORTANT SAFETY RULES

Read, Understand and Follo All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL NSTRUCT ONS

• To reduce the risk of injury, do not permit children to use this product. Always

supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

• Assembly and disassembly by adults only.

• Risk of electric shock. Connect only to a grounding type receptacle, this product

is provided with a ground-fault circuit interrupter. If replacement of the plug or cord

is needed, use only identical replacement parts.

• Always unplug this product from the electrical outlet before removing, cleaning,

servicing or making any adjustment to the product.

• The unit is provided with a ground-fault circuit interrupter (GFCI). To test the GFCI,

push the test button. The GFCI should interrupt power. Push the reset button, power

should be restored. If the GFCI fails to operate in this manner. The GFCI is

defective. If the GFCI interrupts power to the pump without the test button being

pushed, a ground current is flowing, indicating the possibility of an electric shock.

Do not use this pump. Disconnect the pump and have the problem corrected by a

qualified service representative before using.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by

lawn mowers, hedge trimmers and other equipment.

• To reduce the risk of electric shock, the supply cord cannot be replaced. If the cord

is damaged, the appliance should be replaced immediately.

• To reduce the risk of electric shock, do not use extension cords, timers, plug

adaptors or converter plugs to connect unit to electric supply; provide a properly

located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when

your hands are wet.

• Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI

since the ALCI will not protect people.

• Position this product away from the pool, so as to prevent children from climbing on

it and accessing the pool.

• Do not operate this product when the pool is occupied.

• This product is intended to be used only for the purposes described in the manual!

FA LURE TO FOLLOW THESE WARN NGS MAY RESULT N

PROPERTY DAMAGE, ELECTR C SHOCK, ENTANGLEMENT OR

OTHER SER OUS NJURY OR DEATH.

SAVE THESE NSTRUCT ONS Page 4

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

PPAARRTTSS LLIISSTT

PARTS LIST

123

789

10 11

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to

scale.

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio/TV technician for help.

SAVE THESE NSTRUCT ONS Page 5

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

PPAARRTTSS RREEFFEERREENNCCEE

PARTS REFERENCE

Before assembling your product, please take a fe minutes to check the contents

and become familiar ith all the parts.

REF. NO. DESCR PT ON QTY. SPARE PART NO.

AIR R L AS VALV

VALV O-RING

THR AD D COV R

COV R S AL

FILT R CARTRIDG (59900)

HOS S AL

HOS CLAMP

HOS

STRAIN R CONN CTOR

POOL INL T NOZZL

STRAIN R GRID

10460

10264

10459

10325

10134

10122

10116

11070

11071

11072

When ordering parts, be sure to quote the model number and part numbers.

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to

scale.

6789

911

SAVE THESE NSTRUCT ONS Page 6

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS

SETUP INSTRUCTIONS

Be sure you have access to water to fill the pool and chemicals for the water. A

small coin can be used to tighten the hose clamps (7).

MPORTANT: This filter pump is shipped with the air release valve (1) open

(open the air release valve if necessary). DO NOT replace the air release valve

until you reach STEP #8. Failure to follow these instructions will result in air

trapped inside filter housing; the motor will run dry, be noisy and

malfunction.

1. Assemble above-ground-pool first. Carefully follow the pool’s installation

instructions.

2. Place the filter pump the length of the hose away from the pool wall where the

lower black protruding hose connection is "sticking-out".

3. Insert the nozzle union (9 & 10) into the upper protruding hose connections.

Then insert the strainer union (9 & 11) into the lower protruding hose

connections. The hoses (8) fit over the strainers inserted into the connections.

4. There are two hoses to be connected to the filter pump hose connections. With

hose clamps (7), fasten one of the hoses (8) to the lower protruding hose

connection (marked "+" on the pool liner) and to the upper pump connection

(marked "+").

5. Connect the second hose to the remaining upper protruding hose connection

and to the lower pump connection. Make sure all the hose clamps (7) are tight.

6. Twist the filter pump’s threaded cover (3) in a clock-wise direction to be sure it

is on "tight". Use only your hands to tighten the top. Do not tighten with tools

such as pliers.

7. Fill the pool to a level of at least 1-2 inches above the top connection. The

water will automatically flow down into the pump.

8. When water starts flowing out of the air release valve hole, screw in the air

release valve back into the filter housing cover. Do not over tighten the valve.

NOTE: Venting the system is necessary for air to escape as the filter

housing fills with water.

9. Connect the filter pump to the power outlet. The filter pump is now filtering the

water.

Risk of electric shock. Connect this product only to a grounding type

receptacle protected by a ground-fault circuit interrupter (GFC ). Contact a

qualified electrician if you cannot verify that the receptacle is protected by

a GFC .

WARN NG

10. Operate the filter pump until the desired water clarity is obtained.

SAVE THESE NSTRUCT ONS Page 7

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS

SETUP INSTRUCTIONS (continued)

WARN NG

Position this product away from the pool, so as to prevent children from

climbing on it and accessing the pool.

( LLUSTRAT ON NOT TO SCALE)

WATER LEVEL

POOL NLET

NOZZLE

(REMOVE)

HOSE CLAMP

NS DE OF POOL

STRA NER GR D

(REMOVE)

PLUG

UPPER PROTRUD NG

HOSE CONNECT ON

UPPER PUMP

CONNECT ON

LOWER PUMP

CONNECT ON

THREADED

COVER

F LTER

CARTR DGE

NS DE

A R RELEASE

VALVE

HOSE

CLEANING OR REPLACING FILTER CARTRIDGES

1. Make sure filter pump is not operating. Disconnect line cord.

2. To prevent water from escaping the pool, unscrew the pool inlet nozzle (10) and

strainer grid (11) from the strainer connectors and insert the hat-like plugs into

the strainer connectors.

3. In a counter-clockwise motion, remove threaded cover (3) and cover seal (4).

Be careful not to lose the cover seal (4).

4. Remove filter cartridge (5) to clean it. The filter may be cleaned from the spray

from a water hose.

5. Use judgement as to whether cartridge needs to be replaced.

6. Return cartridge to filtering position.

7. Return the seal (4) and threaded cover (3) to their original positions. Tighten

the threaded cover (3) by hand only, twisting it in a clock-wise direction.

8. After service, open the air release valve, remove the plugs, allow any air to

escape through the valve before tightening the valve again and replace the

pool inlet nozzle (10) and strainer grid (11). The pump is now primed with water

again and may be turned on.

SAVE THESE NSTRUCT ONS Page 8

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

AAIINNTTEENNAANNCCEE

POOL CARE AND CHE ICALS

•All pools require care to keep the water clear and hygienically clean. With

proper chemical control, your filter will help attain this objective. Consult your

pool supply dealer for instructions regarding the proper use of chlorine,

algaecide and other chemical agents required for sparkling clear water.

• Keep pool chemicals away from children.

• Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations

could occur.

• Daily pH checking and chemical treatment of the water is very important and

can not be overemphasized. Chlorine, algaecide and maintenance of proper pH

levels are required when filling the pool as well as during the season. Consult

your local swimming pool supply store for instructions.

• The season's first filling of the pool may have brackish water requiring extra

water additives and extra filter changes. Do not allow swimming in pool until the

pH level is balanced. Consult your local swimming pool supply store for

instructions.

• Keep spare filter cartridges on hand. Replace cartridges every two weeks.

• Chlorinated water may damage lawns, gardens or shrubbery as children play

in the pool and splash water outside the pool. Lawn areas underneath the

pool liner will be destroyed. Note that some types of grass may grow through

the liner.

• Filter run time depends on pool size, weather and usage level. xperiment with

various run times so as to produce clean clear water.

CAUT ON

Concentrated chlorine solutions may damage the pool liner. Always

follow the chemical manufacturer’s directions, and the health and

hazard warnings.

1. Before emptying your pool for long term storage, or relocation, be sure the

water is directed towards an acceptable drain water receptacle away from

the house. Check local regulations for specific directions regarding disposal

of swimming pool water.

2. Now, drain the pool.

3. When the pool is empty, disconnect all pool hoses (8) from the pool and filter

pump, simply reverse the set up instructions.

4. Remove the filter cartridge as shown in the Filter Cartridge Cleaning section,

steps 2 thru 4.

5. Remove the nozzle and strainer unions from the pool wall. Place the wall

plugs into the hose connections. Loosen clamps (7) securing the strainer

connectors (9) before removal.

6. Drain water from the filter pump housing.

7. Leave filter pump pieces and hoses outside to thoroughly air dry.

8. Depending on the cartridge (5) usage, a new cartridge may be needed for

next season, keep a spare available.

9. Cover the seal (4), air release valve O-ring (2) and hose seals (6) with

petroleum jelly to preserve its resilience during storage.

10. Store the unit and accessories in a dry place. The storage's temperature

should be controlled, between 32 degrees Fahrenheit (0 degrees Celsius)

and 104 degrees Fahrenheit (40 degrees Celsius) storage location.

11. The original packing can be used for storage.

LONG TER STORAGE

SAVE THESE NSTRUCT ONS Page 9

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

TROUBLESHOOTING GUIDE

TTRROOUUBBLLEESSHHOOOOTTIINNGG GGUUIIDDEE

• To facilitate the connection of the hoses into the black protruding hose

connectors on the liner, you may use soapy water solution (mix 6 drops

of dish washing liquid in 1/2 a cup of water) to lubricate the hoses and

the black protruding hose connectors. Continue per owner's manual.

• Do not use lubricants such as machine or industrial oil or grease.

• Filter cord must be plugged into a 3

wire outlet that is protected by a Class

A Ground Fault Circuit Interrupter.

• Reset circuit breaker. If circuit breaker

trips repeatedly, your electrical system

may have a defect. Turn off circuit

breaker and call an electrician to

correct the problem.

• Let motor cool down.

• Adjust the chlorine and pH level. Consult

your local swimming pool supply stores.

• Clean or replace cartridge.

•

Check the cartridge for holes.

Replace if

damaged.

• Operate the filter for longer periods.

• Clean the strainer screen at the inlet.

• Clear any obstructions in the intake

hose by discharging it inside pool wall.

• Tighten hose clamps, check hoses for

damage, check pool water level.

• Replace cartridge.

• Clean cartridge more often.

• Install the nozzle at the upper position

of the pool inlet, and the strainer at the

lower position of the pool outlet.

• Fill pool to correct water level.

• Clean strainer screens at pool inlet.

• Tighten hose clamps, check hose for

damage.

• Clear any sticks or leaves in the

intake hose.

• Open the release valve at top of pump.

• Remove cover & check for O-ring.

• Tighten cover (Manually).

• Replace or clean cartridge.

• Tighten or reinstall hose clamps.

• Open air release valve, lift and lower

the inlet hose until water starts to flow

out of air release valve, close air

release valve.

FILT R MOTOR

FAILS TO START

FILT R DO SN’T

CL AN POOL

FILT R DO SN’T

PUMP WAT R OR

FLOW IS V RY

SLOW

PUMP DO SN’T

WORK

TOP COV R

L AKING

HOS L AKING

AIR LOCK

• The motor is not plugged in.

• The fuse box needs checking.

• The GFCI circuit breaker is

tripped.

• Motor too hot and overload

protection is shut off.

• Improper chlorine or pH

levels.

• Filter cartridge is dirty.

• Damaged cartridge.

• xcessively dirty pool.

• The strainer screen is

restricting the water flow.

• Clogged inlet or discharge.

• An air leak on the intake line.

• Scale or buildup on cartridge.

• xcessively dirty pool.

• Dirty filter cartridge.

• Nozzle and strainer

connection are reversed.

• Low water level.

• Strainer screen plugged up.

• An air leak on the intake hose.

• Faulty motor or the impeller

is jammed.

• An air lock inside the cartridge

chamber.

• O-ring missing.

• Cover is not tight.

• Filter cartridge is dirty.

• Hose clamps are not

well-fitted.

• There’s air trapped in the

pump housing and inlet hose.

TROUBLE CAUSE SOLUT ON

SAVE THESE NSTRUCT ONS Page 10

(57) MOD L 603 FILT R PUMP NGLISH 7.5” X 10.3” PANTON 295U 11/08/2011

nglish

CO ON POOL PROBLE S

CCOOOONN PPRROOBBLLEESS

MPORTANT

f you continue to experience difficulty, please contact our Consumer

Service Department for assistance. See back cover for contact

information.

PROBLEM DESCR PT ON CAUSE SOLUT ON

ALGA

COLOR D

WAT R

FLOATING

MATT R IN

WAT R

CHRONIC LOW

WAT R L V L

S DIM NT

ON POOL

BOTTOM

SURFAC

D BRIS

• Chlorine and pH

levels need

adjustment.

• Copper, iron or

manganese in water

being oxidized by

the added chlorine.

This is common.

• "Hard water" caused

by a too high pH level.

• Chlorine content is

low.

• Foreign matter in

water.

• Rip or hole in pool

liner or hoses.

• The drain valves are

loose.

• Heavy use, getting in

and out of pool.

• Pool too close to

trees.

• Super chlorinate with shock

treatment. Correct pH to your

pool store's recommended

level.

• Vacuum pool bottom.

• Maintain proper chlorine

level.

• Adjust pH level to the

recommended level.

• Run filter until water is clear.

• Clean cartridge frequently.

• Correct the pH level. Check

with your pool dealer for

advice.

• Adjust the chlorine level.

• Clean or replace your filter.

• Repair with a patch kit.

• Finger tighten all caps.

• Use Intex pool vacuum to

clean bottom of pool.

• Use Intex pool skimmer.

• Greenish water.

• Green or black

spots on pool liner.

• Pool liner is

slippery and/or

has a bad odor.

• Water turns blue,

brown, or black

when first treated

with chlorine.

• Water is cloudy or

milky.

• Level is lower than

on previous day.

• Dirt or sand on

pool floor.

• Leaves, insects

etc.

Andere Handbücher für Krystal Clear 603

Inhaltsverzeichnis

Andere Intex Wasserpumpe Handbücher

Intex

Intex SF15220 Bedienungsanleitung

Intex

Intex SF80220RC-1 Bedienungsanleitung

Intex

Intex Krystal Clear C2500 Bedienungsanleitung

Intex

Intex Quick-Fill 58609 Bedienungsanleitung

Intex

Intex Quick-Fill AP619-III Bedienungsanleitung

Intex

Intex AP619A Bedienungsanleitung

Intex

Intex CS20110 Bedienungsanleitung

Intex

Intex Quick-Fill AP639 Bedienungsanleitung

Intex

Intex Krystal Clear 604 Bedienungsanleitung

Intex

Intex Fast-Fill AP640R Bedienungsanleitung

Intex

Intex Quick-Fil AP634 Bedienungsanleitung

Intex

Intex FastFill AP619DA Bedienungsanleitung

Intex

Intex Krystal Clear CS15110 Bedienungsanleitung

Intex

Intex AP619A Bedienungsanleitung

Intex

Intex AP620C Bedienungsanleitung

Intex

Intex Krystal Clear C1500 Bedienungsanleitung

Intex

Intex Quick-Fill AP643 Bedienungsanleitung

Intex

Intex Quick-Fill AP619-III Bedienungsanleitung

Intex

Intex SF20220R Bedienungsanleitung

Intex

Intex Quickfill Plus AP620D Bedienungsanleitung

Intex

Intex ECO 20110 Bedienungsanleitung

Intex

Intex SP20220 Bedienungsanleitung

Intex

Intex Quick-Fill AP608 Bedienungsanleitung

Intex

Intex Krystal Clear SF10220 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung